• 대한전자공학회논문지
• /
• 제25권11호
• /
• pp.1323-1328
• /
• 1988

Thermally grown $SiO_2$ films on silicon have been thermally nitrided in the $NH_3$ gas ambient and their properties have been investigated by analyzing the AES data and the results of the I-V and the C-V measurements. The Auger depth profile show that the nitrogen-rich layers are formed at the nitrided oxide film surface and near the $SiO_2$-Si interface. The higher the nitridation temperature is, the larger the refractive index of nitroxide film is. And the thinner the oxide film to be nitrided for the same nitridation temperature is, the larger the refractive index of nitroxide film is. When thin $SiO_2$ film is thermally nitrided, the I-V characteristics show the Fowler-Nordheim conduction fashion. Flatband voltages of $SiO_2$ films are shifted by nitridation, due to the fixed charge formation.

• 한국광학회지
• /
• 제4권3호
• /
• pp.323-329
• /
• 1993

본 논문에서는 광굴절 특성을 나타내는 파라메타중 회절효율의 전도도비(${\sigma}_d$/{\sigma}_p$) 의존성에 관해 연구 하였다. 전도도비는 입사빔의 세기에 의존하며, 암전도도 ${\sigma}_d$가 광전도도 ${\sigma}_p$ 에 비해 무시할 수 없을 때 입사빔의 세기에 따라 전도도비가 변화되고, 전도도비의 변화는 결정 내의 정전기장에 영향을 주게 된다. 정전기장의 변화는 전기광학효과에 의해 굴절율을 변화시키고, 굴절율의 변화는 회절효율과 관계한다. 개방회로 상태에서 0.1%/mole $Fe:LiNbO_3$ 결정과 $LiNbO_3$ 웨이퍼에 Fe를 증착시킨 LiNb$O_3$에서 두 입사빔의 세기비와 입사빔세기의 합을 다르게 할 때 회절효율을 측정하고 이론값과 비교하였다.

• 한국광학회지
• /
• 제11권1호
• /
• pp.13-18
• /
• 2000

Si(100) 위에 RF 스퍼터링법으로 SiOxNy 박막을 제작하였다. 제작 조건은 반응 가스 비율에 따른 증착율과 RF 출력으로 하였다. XRD, XPS, n&k analyzer 그리고 FTIR로 SiOxNy 박막의 특성을 조사하였다. XRD 측정결과 ${SiO_x}{N_y}$ 박막은 비정질이었으며, XPS와 n&k analyzer 측정 결과 ${SiO_x}{N_y}$ 박막의 질소성분이 증가할수록 굴절률은 증가함을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.223-224
• /
• 2005

In this paper, multiple regression analysis of the electrical characteristics for $HfO_2$ thin films grown by metal organic molecular beam epitaxy (MOMBE) was investigated. The electrical properties, such as, the accumulation capacitance and the hysteresis index, are the main factors to determine the characteristics of $HfO_2$ thin films. The input factors on the process are the substrate temperature, Ar gas flow, and $O_2$ gas flow. For statistical analysis, the design of experiments was carried out and the effect plots were used to analyze the manufacturing process. This methodology can predict the electrical characteristics of the thin film growth mechanism related to the process conditions.

• 한국식품영양과학회지
• /
• 제28권4호
• /
• pp.871-875
• /
• 1999

This study was carried out to investigate the effects of freezing temperature on the quality of thawing aged beef loin. Drip loss was higher at 3oC freezing than at 20oC freezing, showing 17.21% drip loss after 6 days aging by 3oC freezing, 14.92% drip loss 12 days aging by 20oC freezing. Cooking loss by both water bath and pan boiling were decreased with increased in aging days. The salt soluble protein extractability of the beef loin was increased until 9 days aging by both 3oC and 20oC freezing, after that was decreased. The L value of the beef loin was high until 9 days aging by 3oC freezing, after that the L value of that was decreased. And the aging at 20oC freezing was high significantly with increased aging days. The a value of the beef loin was low significantly in 6 and 9 days aging by 3oC freezing, 20oC freezing was low significantly with increased aging days. The b value of the beginning of aging was higher with increased aging days. The percentage of denatured myoglobin of the beginning of aging was the highest, then those of 3oC and 20oC freezing showed 89.70% and 88.00%, respectively. The shear force of the beef loin was decreased with aging days, but the myofibrillar fragmentation index increased with aging days. The pH of the beef loin increased until 6 days of aging by both 3oC and 20oC freezing, after that the pH decreased.

• 한국재료학회지
• /
• 제24권1호
• /
• pp.53-59
• /
• 2014

The corrosion resistance of submerged entry nozzle (SEN) materials were investigated for high-class steel manufacturing. Composite samples were fabricated by mixing $ZrO_2$, $Al_2O_3$, MgO, mullite, spinel, and carbon. The raw materials were mixed with attrition milling, compacted in a uniaxial pressure of 200MPa and calcined at $1000^{\circ}C$ for 3 h in $N_2$ atmosphere. The bulk density and apparent porosity of the calcined samples were measured by the liquid displacement method in water using Archimedes's principle. The corrosion resistance of the samples were measured by cup test with mold powder at $1550^{\circ}C$ for 2 h. The microstructure and elemental analysis of samples were observed by scanning electron microscopy (SEM), energy dispersive spectrum (EDS), and X-ray diffraction pattern (XRD). The XRD result shows that the starting raw materials were crystalline phase. The microstructure of fabricated specimen was investigated before and after corrosion tests at $1000^{\circ}C$ and $1550^{\circ}C$ for 2h. $ZrO_2$-C composite showed good resistance in the slag corrosion test. Among the composite oxide materials, $ZrO_2-Al_2O_3$-C and $ZrO_2$-MgO-C showed better resistance than $ZrO_2$-C in the slag corrosion test. The diameter variation index of $ZrO_2$-C refractory was 16.1 at $1000^{\circ}C$ for 2 h. The diameter variation index of the $ZrO_2-Al_2O_3$-C refractory was larger than that of the $ZrO_2$-C refractory at $1550^{\circ}C$ for 2 h.

• 한국광학회지
• /
• 제8권1호
• /
• pp.31-36
• /
• 1997

나트륨 이온의 용출을 방지하기 위해 LCD용 유리기판위에 입혀진 SiO$_{2}$ 박막의 굴절율 및 두께를 측정하였다. 입사각을 고정하고 박막의 두께를 0 .angs.부터 주기 두께까지 20.angs.씩 증가시키며 계산한 타원해석상수와 두께를 고정하고 입사각을 45.deg에서 70.deg까지 1.deg.씩 증가시키며 계산한 타원해석상수를 이용하여 LCD용 유리기판위에 증착된 SiO$_{2}$ 박막의 굴절율 및 두께 측정에서의 최적 측정 조건을 구하였다. 최적 측정 조건에서 굴절율 및 두께의 변화에 따른 타원해석상수 .DELTA.와 .PSI.의 변화를 계산하여 .DELTA.와 .PSI.측정 상의 오차와 비교하여 굴절율 및 두께 결정 시의 오차를 추정하였다. 최적 측정 조건인 Brewster 각 근방에서의 여러 입사각에서 LCD용 유리기판위에 입혀진 SiO$_{2}$ 박막의 타원해석상수 .DELTA.와 .PSI.를 측정하고, 이 측정값에 최적 맞춤하는 SiO$_{2}$ 박막의 굴절율 및 두께를 회귀분석방법을 사용하여 전산 계산하고 분광타원해석법에 의한 박막의 두께 및 굴절율과 비교하였다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2008년도 추계학술대회 초록집
• /
• pp.69-70
• /
• 2008

태양전지에서 효율성은 높이고 가격은 낮추기 위한 연구가 활발히 진행이 되고 있다. 본 연구에서는 효율성 중에서도 single layer에서의 반사율에 초점을 맞추었다. 본 연구에서는 single layer 박막에서의 반사율에 대한 시뮬레이션을 수행했다. 적절한 refractive index를 갖는 박막을 사용했을 때, 반사율 감소를 simulation과 실험을 통해서 알 수가 있었으며, MgF2 박막물질을 사용했을 경우, 물질의 refractive index가 낮을수록 반사율이 낮아짐을 알 수 있었다. 시뮬레이션 결과와 실제 실험 결과를 비교했을 때, 실제 실험 결과의 반사율이 약 3%가량 큰 것으로 나타났다. 이는 반사방지막의 증착 불균일성에 기인하는 문제로 생각된다. 또한, refractive index의 차이에 의해 substrate에 따른 최적화 반사율을 얻는 조건이 달라짐을 실험을 통해 확인할 수 있었다. Glass의 경우는 MgF2가 silicon과 GaAs의 경우에는 ZrO2 나 HfO2가 낮은 반사율을 보였다.

• 한국재료학회지
• /
• 제27권6호
• /
• pp.312-317
• /
• 2017

In the construction of a white LED, the region of the red emission is a very important factor. Red light emitting materials play an important role in improving the color rendering index of commercial lighting. These materials also increase the color gamut of display products. Therefore, the development of novel phosphors with red emission and the study of color tuning are actively underway to improve product quality. In the present study, heuristic algorithms were used to search for phosphors capable of increasing the color rendering index and color gamut. Using a heuristic algorithm, the phosphors that were identified were $SrGe_4O_9:Mn^{4+}$ and $BaGe_4O_9:Mn^{4+}$. Emission spectra study confirmed that these phosphors emit light in the deep red wavelength region, which can fulfill the requirement for the improvement in color rendering index and color gamut for a white LED.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.632-638
• /
• 2005

Membrane fouling index such as Silt Density Index (SDI) and Modified Fouling Index (MFI) is an important parameter in design of the integrated RO/NF membrane processes for drinking water treatment. In this study, the effect of particle, membrane and feed water characteristics on membrane fouling index were investigated systematically. Higher fouling index values were observed when filtering suspensions with smaller particle size and higher feed particle concentration. Larger membrane resistance due to smaller pore size resulted in an increased membrane fouling index. The variations of feed water hardness and TDS concentrations did not show any impact on fouling index, suggesting that there were no significant colloidal interactions among particles and thus the porosity of particle cake layer accumulated on the membrane surface could be assumed to be 0.36 according to random packing density. Based on the experimental observations, fundamental membrane fouling index model was developed using Happel Cell. The effect of primary model parameters including particle size ($a_p$), particle concentration ($C_o$), membrane resistance ($R_m$), were accurately assessed without any fitting parameters, and the prediction of membrane fouling index such as MFI exhibited very good agreement with the experimental results.