• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.216-224
• /
• 1997

Porous silica ceramics were prepared(with HCI catalyst) using H2O/TEOS molar ratios of 2.6~59.0, with the EtOH/TEOS ratio fixed. After preparing 9 kinds of sol, the followings were investigated; measurement of the gelation time, thermal analyses by TG/DTA, property analyses of the intermediates by FT-IR and X-ray diffractometry with dried samples, analyses of SiO2 polymer by FT-IR, the investigation of specific sur-face area and pore size distribution by N2-adsorption isotherm, and structural change of SiO2 polymer and pore morphology by TEM observation, with samples heat-treated to 50$0^{\circ}C$. In the concentrations of in-vestigated compositions and catalyst, gelation time showed a minimum at ca. 11 moles of water per one mole of TEOS, the highest degree of polymerization at ca. 8-18 moles, and the largest specific surface area at ca. 11 moles, which means that the polymerization proceeded fastest at ca. 11 moles of water. In con-clusion, the more water used, the faster the polymerization reaction up to ca. 11 moles, but more than ca. 11 moles of water caused retardation of gelation and resultant reduction of specific surface area.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.209.2-209.2
• /
• 2013

We proposed and fabricated zinc oxide thin-film transistors (TFTs) employing 4-mercaptophenol (4MP) doped ZnO by atomic layer deposition (ALD) that results in highly stable and high performance. The 4MP concentration in ZnO films were varied from 1.7% to 5.6% by controlling Zn:4MP pulses. The n-type carrier concentrations in ZnO thin films were controlled from $1.017{\times}10^{20}/cm^3$ to $2.903{\times}10^{17}/cm^3$ with appropriate amount of 4MP doping. The 4.8% 4MP doped ZnO TFT revealed good device mobility performance of 8.4 $cm^2/Vs$ and the on/off current ratio of 106. Such 4MP doped ZnO TFTs exhibited relatively good stability (${\Delta}V_{th}$: 2.4 V) under positive bias-temperature stress while the TFTs with only ZnO showed a 4.3 ${\Delta}V_{th}$ shift, respectively.

• Annals of Hepato-Biliary-Pancreatic Surgery
• /
• v.27 no.3
• /
• pp.292-300
• /
• 2023

Backgrounds/Aims: Current literature presents limited data regarding outcomes following conversion at the time of minimally invasive pancreaticoduodenectomy (MI-PD). Methods: The National Cancer Database was queried for patients who underwent pancreaticoduodenectomy. Patients were stratified into three groups: MI-PD, converted to open pancreaticoduodenectomy (CO-PD), and open pancreaticoduodenectomy (O-PD). Multivariable modeling was applied to compare outcomes of MI-PD and CO-PD to those of O-PD. Results: Of 17,570 patients identified, 12.5%, 4.2%, and 83.4% underwent MI-PD, CO-PD, and O-PD, respectively. Robotic pancreaticoduodenectomy (R-PD) resulted in a higher lymph node yield (n = 23.2 ± 12.2) even when requiring conversion (n = 22.4 ± 13.2, p < 0.001). Margin positivity was higher in the CO-PD group (26.6%) than in the MI-PD group (21.3%) and the O-PD (22.6%) group (p = 0.017). Length of stay was shorter in the MI-PD group (laparoscopic pancreaticoduodenectomy 10.4 ± 8.6, R-PD 10.6 ± 8.8) and the robotic converted to open group (10.7 ± 6.4) than in the laparoscopic converted to open group (11.2 ± 9) and the O-PD group (11.5 ± 8.9) (p < 0.001). After adjusting for patient and tumor characteristics, both MI-PD (odds ratio = 1.40; p < 0.001) and CO-PD (odds ratio = 1.24; p = 0.020) were significantly associated with an increased likelihood of long-term survival. Conclusions: CO-PD does not negatively impact perioperative or oncologic outcomes.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.6
• /
• pp.506-511
• /
• 2009

For the application of the photosensitive barrier ribs with optimal properties such as glass transition temperature, refractive index and coefficient thermal expansion, the boro-silicate glasses was studied. The glass transition temperature, coefficient thermal expansion, and refractive index of the glasses based on the $B_2O_3-Al_2O_3-Al_2O_3-SiO_2$ glass system have been investigated with the different ratio of BaO/$Na_2O$ and $B_2O_3/Na_2O$. Increasing the ratio of $B_2O_3/Na_2O$ was led to the increase of coefficient thermal expansion and the decrease of glass transition temperature. The increase of refractive index of boro-silicate glasses increased with the density of glasses. We suggest the empirical equation for the prediction of refractive index with the glass density, $n=0.123{\rho}+1.182$ with 0.042 as the standard deviation in the boro-silicate glass system. The aim of the present paper is to give a basic result of the thermal and optical properties for designing the composition of photosensitive barrier ribs in PDP.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.2
• /
• pp.124-129
• /
• 2000

The purpose of this study is to estimate the degradation rate and process efficiency of the composting according to the salinity concentration. The samples of food waste for this study were collected in Pocheon-Gun, Kyungki-Do. The collected samples were adjusted to the optimum range of moisture content, pH and C/N ratio. After that, adding the saline, the samples with 3 different salinity concentrations(1%, 5% and 10%) were made. Then each sample was fed into the reactor with temperature controller. During the aerobic composting process, the change of the physical and chemical properties of the sample as temperature, pH, C/N ratio and $CO_2$ and $O_2$ concentration in the reactor were measured. From the experiment of this study, the result are following. The highest temperatures are $59^{\circ}C$ at RUN 1(1% salinity conc.), $49^{\circ}C$ at RUN 2(5% salinity conc.) and $45^{\circ}C$ at RUN 3(10% salinity conc.). The change of $CO_2$ production and $O_2$ consumption have the positive correlation with the change of the temperature. $CO_2$ production and $O_2$ consumption are peaked at the low salinity concentration. During composting, Run 1, RUN 2 and RUN 3 are increased pH to 8.9, 8.6 and 7.2 and slowly decreased C/N ratio to 18.9, 19.1 and 22.1 and moisture content to 51.1%, 53.7% and 55.0%, respectively. It is supposed that increasing salinity concentration causes the retarding of the microbial degradation activities during the composting. And for the efficient composting, the salinity concentration in the sample hat to be maintained below 5%.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.5
• /
• pp.577-583
• /
• 2016

Small-sized persimmons produced by high crop load are better accepted in the export markets. However, maintaining high crop load frequently results in weakness of tree vigor, deterioration of fruit quality, and increase of the risks for alternate bearing. This experiment was conducted to determine the combined effects of fertilization rate and leaf-fruit (L/F) ratio on container-grown 3-year-old 'Fuyu' persimmon trees. Application of 3.6-g N, 2.1-g $P_2O_5$, 2.7-g $K_2O$, 2.7-g CaO, and 0.6-g MgO was for the control fertilization rate (CF) and that of a 3-fold CF was for the high fertilization rate (HF). Commercial fertilizers were surface-applied to a container on July 6, July 17, and August 10 in three equal aliquots. Single tree for each fertilization rate was assigned for 12 L/F ratios (5, 6.3, 7.7, 9, 10.4, 13, 15.5, 18, 21, 24, 27, and 33) mostly by fruit thinning or rarely by defoliation on July 1. HF did not affect the yield, weight and soluble solids of the fruits but decreased skin color. As L/F ratio increased, yield decreased but average weight, skin color, and soluble solids of fruits increased. With HF, N and K concentrations in leaves, fruits, and shoots increased to some extent but soluble sugars in dormant shoots decreased. Many shoots were cold-injured with low L/F ratio especially at the HF. HF did not increase number of flower buds the next spring either on a shoot or on a tree basis but increased shoot length, compared with the CF. Increasing L/F ratio markedly increased number of flower buds and shoot growth the following year at both fertilization rates. Therefore, an appropriate combination of fertilization rate and L/F ratio should be necessary to maintain stable fruit production and tree vigor at high crop load.

• Journal of Magnetics
• /
• v.11 no.1
• /
• pp.8-11
• /
• 2006

Recently half-metallic full-Heusler alloy films have attracted significant interests for spintronics devices. As these alloys have been known to have a high spin polarization, very large TMR ratio is expected in magnetic tunnel junctions. Among these alloys, $Co_2MnSi$ full-Heusler alloy with a high spin polarization and a high Curie temperature is considered a good candidate as an electrode material for spintronic devices. In this study, the magnetic and structural properties of $Co_2MnSi$ Heusler alloy films were investigated. TMR characteristics of magnetic tunnel junctions with a $Co_2MnSi/SiO_2/CoFe$ structure were studied. A maximum MR ratio of 39% with $SiO_2$ substrates and 27% with MgO(100) substrates were obtained. The lower MR ratio than expectation is considered due to off-stoichiometry and atomic disorder of $Co_2MnSi$ electrode together with oxidation of the electrode layer.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.753-756
• /
• 2009

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.451-457
• /
• 2007

Four parallel $A^2/O$ systems maintaining an MLSS of 3,000 mg/L were operated to investigate the effects of varying an HRT of anoxic reactors and packing Bio contact media (BCM, fixed beds) in aerobic reactors on organic matter removal and nitrification/denitrification efficiencies. All systems were operated under conditions that the external recycle ratio was kept 0.5 Q while the internal recycle ratio was changed 1.0 Q to 1.5 Q with that $NH_4-N$ concentration of feed was increased to 40 mg/L by adding $NH_4Cl$. In terms of TSS and TCODcr removal efficiency, both systems with BCM and a system without BCM, respectively, had a similar level of the removal efficiency under varied HRTs of anoxic reactors (0.6 hr, 1.3 hr, 2 hr, 2 hr; control, without BC M) showing that varying an HRT of anoxic reactors did not affect the removal efficiency. While SCODcr removal efficiency of systems with BCM was improved approximately 4~5% at the same HRT of anoxic reactor, the removal efficiency of system with BCM was slightly decreased by reducing an HRT of anoxic reactor. The nitrification efficiency for both systems with BCM and a system without BCM was above 94% showing that packing BCM in aerobic reactors and varying an HRT of anoxic reactors did not affect the efficiency significantly despite of increasing $NH_4-N$ concentration of feed. The denitrification efficiency increased from 81.4% to 85.4% at system with BCM while the efficiency decreased when a shorter HRT of anoxic reactors was kept. The excellent effluent quality for $NO_3-N$ concentration was observed although the $NO_3-N$ concentration increased in anoxic reactors that $NH_4-N$ concentration of feed sufficiently converted into nitrate through nitrification. As a result, packing 20% BCM to an aerobic reactor with HRT of 1.3 hr of anoxic reactor in $A^2/O$ system can achieve a similar level of nitrogen removal efficiency in $A^2/O$ system which the aerobic reactor had no BCM and HRT of 2 hr for anoxic reactor is maintained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.313-314
• /
• 2008