• 제목/요약/키워드: Nylon6,6

검색결과 507건 처리시간 0.023초

유.아동복 레이블의 불만에 관한연구 (A Study on Consumer Complaints over Lables on children's Clothing)

  • 박선경;홍지명;이정순;신혜원;유호선
    • 한국의류학회지
    • /
    • 제23권2호
    • /
    • pp.307-313
    • /
    • 1999
  • This study investigated material the type(sewn-in stamped-on etc) of the label and its placement(location on the product) on children's clothing in order to survey consumer complaints to suggest the improvement. The data were collected from label-producing companies by surveying children's clothing displayed at department store as well as by questionnaire to 205 consumers who were mothers of preschool children. The results were as follows : 1. 100% polyester was the most used raw material for brand labels and nylon was for care labels. 2. Most brand labels were one piece labels and located inside the back of neck line by sewn-in either on the top on each sides or on all four sides, Care labels were usually sewn-in on the inside of left-side seam line. The texture of care label was softer than that of brand label and two pieces of care labels were widely used, 3. 67.3% of consumers complained of its stiffness while 36.1% of consumers complained of rough surface and edge 85.4% of consumers complained of an itch caused by brand labels and claimed to detach labels. For care labels 36.6% expressed displeasure of stiffness of labels while 39% complained of annoyance due to too many pieces of labels. 4. Major suggestions from the consumers were change of raw materials and relocation of brand labels. For the care labels changes of material form and type of labels were suggested and one piece of label and smaller size were preferable.

  • PDF

나일론 극세사와 PU 복합소재의 염색 특성 (Dyeing Properties of Ultrafine Nylon Fiber and PU Mixture Fabric)

  • 이효영;이승관;김성동
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2011년도 제45차 학술발표회
    • /
    • pp.4-4
    • /
    • 2011
  • 본 연구에서는 해도형 나일론 극세사 제품의 알칼리 용출 및 염색특성에 대한 고찰과 인공피혁, 스웨이드 조직 편물 등의 목적으로 함께 쓰이게 될 폴리우레탄과의 혼방 제품의 염색성 향상에 대한 연구를 진행하였다. 먼저, 해도형 나일론 극세사의 알칼리 용출거동을 확립하기 위해 NaOH 농도 및 온도에 따른 감량 특성을 확인하였으며, Red 색상의 산성염료와 반응성 염료 타입에 따른 염색특성 및 세탁 견뢰도 등을 고찰하였다. 또한, 폴리우레탄의 염착성을 향상시키기 위해 폴리우레탄 합성시 고분자 말단에 아민기를 함유하는 시료에 대한 염색성을 고찰하고, 폴리우레탄 함침 소재로서 쓰이는 인공피혁을 제조하여 염색 특성을 알아보았다. 해당 연구를 통하여 다음과 같은 결과를 얻을 수 있었다. 해도형 초극세사의 알칼리 용출의 경우 $90^{\circ}C$에서 30분 유지시키는 것이 가장 적절한 조건이었으며, pH에 따른 염색성의 경우 레벨링 타입 염료와 반응성 염료의 경우 4~5, 밀링 타입과 함금속 염료의 경우는 5~6정도의 pH에서 우수한 염색성을 나타내었다. 산성염료의 경우 염색온도와 시간이 증가함에 따라 초극세사에 염착된 염료들은 이면의 일반 나일론사로 이동하는 현상이 증가하였지만 반응성 염료의 경우는 이러한 이염 현상이 나타나지 않았다. 한편, 농도가 증가함에 따라 산성염료는 우수한 빌드업성을 나타내는데 반해 반응성 염료는 4% owf이상에서는 염착량이 증가하지 않았으나, 세탁 견뢰도의 경우 반응성 염료로 염색된 시료가 가장 우수한 견뢰도를 나타내었다. 그리고 앞선 모든 염색실험에 있어서 일반 나일론사보다는 초극세사의 염착률이 더 높았고, 겉보기 색농도는 낮게 나타나는 현상을 확인할 수 있었다. 한편, 나일론/폴리우레탄 혼방제품에서 쓰이는 일반적인 폴리우레탄(RPU)과 아민 함량이 높은 폴리우레탄(APU)의 염색성을 알아본 결과 APU의 염색성이 훨씬 우수하였고, RPU에서 나타나는 현상인 염색의 진행에 따른 염료의 탈리가 나타나지 않았으며 견뢰도 또한 우수하였다. 인공피혁의 염색에서는 함침에 사용된 폴리우레탄 수지의 구조에 따라 염색성이 달라지는 현상을 확인하였으며, 특히 반응성 염료를 사용할 경우 인공피혁에서 일반적으로 문제가 되는 견뢰도 저하의 현상이 나타나지 않았다.

  • PDF

헛개나무추출액 및 생약성분의 혼용이 사염화탄소 투여로 유발된 흰쥐의 급성 간 및 신장손상의 회복에 미치는 영향 (The Therapeutic Effect of Hovenia dulcis Thunberg Extracts and 6 Types of Herbal Extracts on $CCl_4-Induced$ Acute Liver and Kidney Damages in Rats)

  • 임미경;김주완;김지은;김홍태;정상주;강미영;이근우
    • 한국임상수의학회지
    • /
    • 제24권3호
    • /
    • pp.400-405
    • /
    • 2007
  • This study was performed to investigate the therapeutic effects of Hovenia dulcis Thunberg (HDT) and HDTmix extracts on the biochemical analysis, histopathology and histomorphometry of liver and kidney in carbon tetrachloride $(CCl_4)$ administrated rats. Extract was prepared by autoclave ($121^{\circ}C$, 15 psi, 3 hours) and filtered with nylon cloth and filter paper then freezing dried. In blood chemistry analysis, HDTmix group, aspartate aminotransferase and alanine aminotransferase were significantly (p<0.01) decreased compared to the $CCl_4$ group, on 3rd day, respectively. In histologic and histomorphometry analysis, the $CCl_4-related$ hepatopathies and nephropathies were dramatically decreased (3rd, 5th day), and well corresponded to the histopathological changes significantly (p<0.01) decreases of degenerative regions, degenerative cells and glomeruli were detected in liver and kidney with significantly decreases of $CCl_4$ group. HDTmix group, quite similar effects on the liver and kidney were observed compared to that of HDT extracts group but more favorable efficacies were detected especially HDTmix also inhibit the hepatopathies (1 day), in which HDT extract does not showed any inhibit effects.

피조개의 이용에 관한 연구 1. 피조개 분말수우프의 제조 및 저장중의 품질안정성 (Studies on the Utilization of Arkshell 1. Preparation and Quality Stability during Storage of Powdered Dried Arkshell for Instant Soup)

  • Kim, Hee-Yun
    • 한국식품위생안전성학회지
    • /
    • 제3권4호
    • /
    • pp.217-223
    • /
    • 1988
  • For the Effective utilization of the fish resources in coastal regions, investigations on preparation of powdered dried arkshell instant soup., quality stability of the products during storage and utilization as a food material were carried out with arkshell, Anadara broughtonii. Three kinds of powdered instant soup were prespared as 0% table salt(A), 5% table salt (B), 15% table salt(C) and packed with vacuum in laminated film bag. (polyester/nylon: 85${mu}ell$/15${mu}ell$, 18$\times$27cm) Their processing conditions and quality stability during storage at room temperature for 90 days were examined. Powdered instant soup was made by washing raw arkshell to remove visceral, clay, sand and blood, hot air drying(60$\pm$1$^{\circ}C$, 20 hrs) after draining and pulverizing dried arkshell to 35 mesh. Powdered instant soup was made by adding 2% sugar 0% table salt (5% and 15% table salt), 10.5% monosodium glutamate, 0.3% black pepper and 0.3% garlic powder to the pulverized dried arkshell. The condition of moisture and water activity of the products were 5.9-6.9% and 0.42-0.43, respectively. The moisture content s , water activity and pH of the products were showed little change and volatile basic nitrogen of them increased slightly during storage. Thiobarbituric acid value increased up to 60 days of storage and then decreased slightly. In solubility, powdered instant soup were showed no remarkable difference comparing with goods on the market. The color value of th products were showed little change during storage, In sensory evaluation, product B were scored slightly higher, in most cased, in flaver, color. taste and overall acceptability comparing with product A or product C during storage. Judiging form the sensory evaluation, powdered instant soup of 5% table salt (B) were the most desirable, and the quality of the products was stable for 90 days at 20$\pm$3$^{\circ}C$.

  • PDF

온도 및 계절요인에 따른 포장 김치의 기체조성 변화 (Gas Composition within Kimchi Package as Influenced by Temperature and Seasonal Factor)

  • 홍석인;이명기;박완수
    • 한국식품과학회지
    • /
    • 제32권6호
    • /
    • pp.1326-1330
    • /
    • 2000
  • 김치발효중 기체조성변화가 숙성정도를 감지할 수 있는지 알아보기 위하여 배추김치를 플라스틱 용기에 일정량 충진하여 밀봉한 후 저장하면서 포장내 기체조성 변화를 조사한 결과, 김치발효중 포장내 기체조성은 $CO_2$ 발생으로 인하여 계속적으로 변화하였다. 김치 발효온도와는 무관하게 $O_2$ 농도는 지수적으로 감소하고 $CO_2$ 농도는 매우 특징적인 2단계 증가양상을 나타내었다. $CO_2$ 농도는 2차 단계에서 다시 증가함에 따라 김치의 pH는 비례적으로 감소하였다. 저장 온도와 계절별 원료 배추에 따라 김치 포장내 $CO_2$ 농도변화 속도가 다르며 최종 농도에 있어서도 상당한 차이를 나타내었다. 고온에서 발효된 김치일수록 포장내 $CO_2$ 농도가 더 높은 경향을 보였고 여름배추 보다 겨울이나 봄 배추로 제조한 김치에서 포장내 $CO_2$ 농도 및 발생속도가 더 높게 나타났다. 이러한 연구결과를 바탕으로 포장내 기체조성 변화를 이용한 김치의 숙성도 감지 가능성을 확인할 수 있었다.

  • PDF

사출성형된 고분자 블렌드의 형태학적 상구조 예측 (The Prediction of Phase Morphology of Injection Molded Polymer Blends)

  • 손영곤
    • Elastomers and Composites
    • /
    • 제39권3호
    • /
    • pp.193-208
    • /
    • 2004
  • 사출성형된 고분자 블렌드의 형태학적 상구조를 실험 및 이론적인 방법으로 연구하였다. 실험적인 연구로서, 형태학적 상구조에 미치는 사출속도, 사출온도 효과를 조사하였다. 이를 통하여 고분자 블렌드로 제조된 사출성형품에서 두께 위치에 따른 형태학적 상구조 변화를 뚜렷하게 관찰할 수 있었으며, 사출성형품 표면에 분산상이 가늘고 길게 변형되어있는 스킨층, 그안 쪽에 분산상이 다소 크고 변형이 되어있는 서브스킨층 및 사출성형품의 중심에 위치하고 분산상의 변형이 전혀 없는 코어영역이 존재함을 알 수 있었다. 실험적인 연구 결과를 토대로 고분자 블렌드의 사출과정에서 형성되는 형태학적 상구조를 예측하는 계산 알고리듬을 제시하였다. 상업화된 사출성형 해석용 프로그램에서 얻은 유동장 정보와 유동장에서 분산상의 거동에 관한 이론 및 실험식을 조합하여 사출성형된 고분자 블렌드의 형태학적 상구조를 예측할 수 있었다. 제시된 계산 알고리듬으로 사출온도 및 사출속도에 의한 형태학적 상구조의 변화를 잘 예측할 수 있었다.

MRT(Moisture Responded Transformable)섬유의 의료용 압박소매 적용에 관한 연구 (A Study on the Application of Medical Compression Arm Sleeves Using a MRT(Moisture Responded Transformable) Fibers)

  • 조대현;정태두;박은희;박영미
    • 한국염색가공학회지
    • /
    • 제33권2호
    • /
    • pp.87-95
    • /
    • 2021
  • In this study, the application of a medical compression sleeve of Moisture Responded Transformable(MRT) fibers to the treatment of lymphedema after surgery in breast cancer patients was investigated. MRT fibers were manufactured with PET and Nylon6 bi-component cross-section yarns, and compression sleeves of sleeves 1, 2, 3, and 4 were knitted in order of size, and then the physical properties and clinical tests were evaluated. As a result, the pressure of compression sleeve in wrinkle was the lowest in sleeve 1 with 3.81 kPa, and the highest in sleeve 4 with 5.22 kPa. Elastic recovery rate is that all parts except the top of the sleeve 1 exhibited 100%. The air permeability was good at 12.1 ~ 16.1 cm3/cm2/sec, and peeling was also comparatively excellent as grade 3. In addition, the weight of the compression sleeves 1, 2, and 3 decreased as 18.3 ~ 23.0 g/m2 depend on size, while the compared sample was heavier with 17.39 ~ 32.61 g/m2. In lymphoscintigraphy test, it was confirmed that the function of remaining lymph node was good in all patients. Although there were no differences between samples in skin irritation and tightness in wearing comfort, the manufactured sleeves showed better fit, lightness, fashion and breathability than the comparable sleeves.

Biomechanical comparison of bone staple techniques for stabilizing tibial tuberosity fractures

  • Kyu-Tae Park;Min-Yeong Lee;Hwi-Yool Kim
    • 대한수의학회지
    • /
    • 제63권3호
    • /
    • pp.24.1-24.6
    • /
    • 2023
  • This study compared the biomechanical properties of bone-stapling techniques with those of other fixation methods used for stabilizing tibial tuberosity fractures using 3-dimensionally (3D)-printed canine bone models. Twenty-eight 3D-printed bone models made from computed tomography scan files were used. Tibial tuberosity fractures were simulated using osteotomy. All samples were divided into 4 groups. Group 1 was stabilized with a pin and tension-band wire; group 2, with a pin and an 8 mm-wide bone staple; group 3, with 2 horizontally aligned pins and an 8 mm-wide bone staple; and group 4 with a 10 mm-wide bone staple. Tensile force was applied with vertical distraction until failure occurred. The load and displacement were recorded during the tests. The groups were compared based on the load required to cause displacements of 1, 2, and 3 mm. The maximum failure loads and modes were recorded. The loads at all displacements in group 4 were greater than those in groups 1, 2, and 3. The loads at 1, 2, and 3 mm displacements were similar in groups 1 and 3. There was no significant difference between groups 1 and 3. Groups 1 and 4 provided greater maximum failure loads than groups 2 and 3. Failure occurred because of tearing of the nylon rope, tibial fracture, wire breakage, pin bending, and fracture around the bone staple insertion. In conclusion, these results demonstrate that the bone-stapling technique is an acceptable alternative to tension-band wire fixation for the stabilization of tibial tuberosity fractures in canine bone models.

탈산소제에 의한 반염건고등어 저장중의 품질안정성 (The Storage Stability of Semi-Salted and Dried Mackerel by Free-Oxygen Absorber)

  • 이응호;정영훈;주동식;김정희;오광수
    • 한국수산과학회지
    • /
    • 제18권2호
    • /
    • pp.131-138
    • /
    • 1985
  • 다획성적색육어류에 속하는 고등어를 효율적으로 이용하기 위한 방안의 하나로서 즉석에서 그대로 조리하여 먹을 수 있도록 알맞은 수분함양과 식염함양이 적은 반염건고등어를 제조하여 함기포장한 것을 대조제품으로 하고 탈산소제를 봉입한 포장제품을 진공포장제품, 질소치환포장제품과 비교하여 저장중의 품질안정성에 대하여 검토하였다. pH는 전제품이 $6.1{\pm}0.2$의 범위내에서 저장중 약간의 증감이 있었으며, 휘발성염기질소와 아미노질소는 전제품이 저장중 증가하는 경향이었다. 특히 탈산소제봉입포장제품은 휘발성염기질소의 증가폭이 낮았다. 색조는 저장중 전제품이 L값(명도)이 약간 감소한 반면에 a값(적색도) 및 b값(황색도)은 증가하는 경향이었다. 그리고 함기포장제품(대조제품)의 경우 생균수는 저장 15일경에 $3{\times}10^6/g$에 달하였으나 진공, 질소치환 및 탈산소제봉입포장제품은 저장20일까지도 $2{\sim}6{\times}10^5/g$범위였다. TMAO는 저장중 감소하고 TMA는 증가하는 역상관관계를 나타내었으며, histamine은 전제품 모두가 16mg/100g이 하였다. 또한 핵산관련물질은 초기에 IMP가 축적되었으나 저장기간이 경과함에 따라 IMP가 분해되고 이노신과 하이포크산틴이 축적되었다. TBA값은 함기포장제품의 경우 저장 9일째 최고값을 나타내다가 감소하였으며, 진공포장제품과 질소치환포장제품은 저장 9일째 최고값을 나타내었으나, 함기포장제품의 경우보다 1/2 정도로 낮았다. 그러나 탈산소제봉입포장제품은 저장중 거의 변화가 없었으며, 과산화물 값도 비슷한 경향이었다. 생시료는 포화지방산이 $35.6\%$, polyene 산이 $34.2\%$, monoene 산이 $30.3\%$였고 oleic acid가 $20.2\%$로 가장 많았고 다음으로 palmitic acid, docosahexaenoic acid, eicosapentaenoic acid순이였다. 저장중 포장방법에 관계없이 고도불포화지방산($C_{20:5},\;C_{22:6}$)이 감소하는 반면에 $C_{16:0},\;C_{18:1}$은 다소 증가하는 경향을 나타내었으나, 탈산소제봉입포장제품이 고도불포화지방산의 보존효과가 가장 좋았다. 관능검사 결과, 함기포장제품은 저장 9일째에 선도저하에 의한 이취로 식용할 수 없을 정도였으나, 진공포장, 질소치환포장제품 및 탈산소제봉입포장제품은 저장 15일까지도 식용가능하였다. 특히 탈산소제봉입포장제품은 진공포장제품 및 질소치환포장제품과 마찬가지로 품질보존효과가 우수하다는 결론을 얻었다.

  • PDF

온도와 포화도의 변화에 의한 표면장력이 전단파 속도에 미치는 영향 (The Effect of Surface Tension on Shear Wave Velocities according to Changes of Temperature and Degree of Saturation)

  • 박정희;강민구;서선영;이종섭
    • 대한토목학회논문집
    • /
    • 제32권6C호
    • /
    • pp.285-293
    • /
    • 2012
  • 표면장력에 의한 겉보기 점착력은 적절한 함수비를 가지고 있는 흙의 경우 생성되며 지반의 강도를 증가시킨다. 본 연구의 목적은 온도에 따라 변화하는 표면장력이 전단파 속도에 미치는 영향을 파악하는 것이다. 표면장력의 발생 유무를 조절하기 위하여 모래-실트 혼합토를 이용하여 포화도가 다른 아홉 가지의 시료 (0%, 2.5%, 5%, 10%, 20%, 40%, 60%, 80%, 100%)를 조성하였다. 전단파 속도를 측정하기 위해 나일론 재질의 셀을 제작하였으며 전단파 트랜스듀서인 벤더 엘리먼트를 크로스 홀 형상으로 부착하였다. 시료의 온도가 $15^{\circ}C$에서 $1^{\circ}C$까지 변화하는 동안 포화도가 다른 각 시료의 전단파 신호를 연속적으로 측정하였다. 실험결과, 포화도 0%인 시료와 포화도 100%인 시료는 온도변화에 의한 전단파 속도 변화가 미비하였으나, 표면장력이 발생하기에 적절한 포화도를 가진 시료는 온도가 감소함에 따라 전단파 속도는 증가하였다. 또한 완전 포화된 시료를 $70^{\circ}C$에서 건조시키면서 포화도에 따른 전단파 속도를 측정한 시료의 경우, $15^{\circ}C$에서 측정된 시료의 전단파 속도보다 더 낮은 전단파 속도가 측정되었다. 본 연구는 특정한 포화도에서 온도변화에 따라 전단파 속도가 변화하는 원인을 실험을 통해 분석하였으며, 미소변형구간에서의 전단탄성계수 측정과 같은 실내 및 현장실험 시, 온도를 동시에 평가해야 함을 보여준다.