• Textile Coloration and Finishing
• /
• v.21 no.3
• /
• pp.26-36
• /
• 2009

The objective of this study is to investigate the elution characteristics of the partial dispositioned hollow nylon filament and the mechanical properties of the eluted fabrics according to the weight reduction conditions. For this purpose, the partial dispositioned nylon/PET composite filament, SDY 70d/48f was prepared, and warp beam was also prepared on the sizing machine using these yarns. Four kinds of woven fabrics were designed with different warp and weft densities and these fabrics specimens were eluted with weight reduction conditions of two kinds of NaOH concentration (30, 40g/l), three kinds of weight reduction temperature (50, 60, $85^{\circ}C$) and two kinds of weight reduction time (30, 60min). The eluting rates of these fabrics specimens were analysed with various weight reduction conditions. The eluting characteristics of these fabrics were discussed with the cross-section of nylon hollow filament measures by SEM. Finally, the mechanical properties of the partial dispositioned hollow nylon fabrics were measured and discussed with various weight reduction conditions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.6 no.1
• /
• pp.14-22
• /
• 1970

To investigate some properties of imported netting twines, the breaking strength, elongation and shrinkage were measured. Most of the yarns of palyamide (nylan 6), as raw material, used for netting twines are imported from Japan, however, their properties by maker's are not well known in Korea. The properties of these imported twines were ompared with Korean made netting twines and the effects of dying were also tested according to temperature. After all, nylon 6 of Unitika was the strongest and followed by those of Toray, Teijin, Kalan respectialy in wet and dry condition. The shrinkage was 3.07-5.0 % after dying in imported netting twines, while Kalan was 8. 84 % .

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.201-209
• /
• 2003

DC and AC electrical conductivity and electromagnetic interference shielding effectiveness of milled carbon fiber/nylon composites were investigated with the kind of nylon matrix. Percolation transition at which the conductivity is sharply increased was observed at about 7 vol% of milled carbon fiber. Nylon 46 as a matrix was more effective to obtain high electrical conductivity than nylon 6, and the difference in conductivity was occurred by the treatment of coupling agent. Frequency dependence of AC conductivity could be explained by relaxation phenomenon at just below percolation and resonance phenomenon at 40 vol% of carbon fiber, respectively. Negative temperature coefficient phenomenon was found in all composites. Electromagnetic interference shielding effectiveness was increased with the concentration of carbon fiber. At a high conductivity region the return loss was more dominant to the total shielding effectiveness than the absorption loss.

• Textile Coloration and Finishing
• /
• v.18 no.5 s.90
• /
• pp.1-7
• /
• 2006

The dyeing properties of the several reactive dyes possessing different types of the reactive group on nylon 6 fabric have been investigated. Dyeing of nylon fiber with commercial reactive dyes was dependent on the dye bath pH. As pH increased, the extent of exhaustion decreased due to the deprotonation of the amino end group. But, the extent of fixation increased because of the enhanced reactivity with nylon fiber. It was found that all reactive dyes could be applied to nylon 6 reasonably at pH 5-6. But, the conflicting requirements of dye exhaustion and covalent bond formation limited the extent of fixation efficiency. The best method to improve the extent of the fixation efficiency of the reactive dyes was the conversion of sulphatoethylsulphone group to vinylsulphone group before dyeing with trisodium phosphate. The converted Supra type reactive dye gave the highest extent of fixation efficiency, which was about 90%.

• Resources Recycling
• /
• v.22 no.1
• /
• pp.29-35
• /
• 2013

The study on the recovery of Nylon from a radiator of End-of-Life Vehicle was conducted by using triboelectrostatic separation technique. For the effective separation of the sample(Nylon, PP glass), charge polarity and amount of each sample with various charging materials have been investigated by faraday cage. And then, charging material was selected as carrying out basic separation experiments with materials that can be possible to polarize samples. Finally, the continuos type triboelectrostatic separator was developed with selected charging material and the recovery possibility of the sample was confirmed as carrying out various separation experiments.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.3
• /
• pp.76-81
• /
• 2006

The reinforcement of soil shear strength by nylon net as substitute materials simulating a fine root system was evaluated by soil strength parameters(apparent cohesion(c) and internal friction angle(tan${\phi}$), using simple shear tester which clearly depicts shear deformation and controls soil suction. And the results of shear test by using bamboo as a substitute materials simulating a main root system and using nylon net as a substitute materials simulating a fine root system were compared. The reinforcement of soil strength by nylon net are expressed by apparent cohesion more than internal friction angle. In addition the increment of apparent cohesion by nylon net reached a peak in suction 60 $cmH_2O$. Different from with bamboo, the possibility of the change on internal friction angle(tan${\phi}$) caused by the soil water condition was shown in shear strain 20% condition. These results show that the mechanism of reinforcement by substitute materials simulating root system may be different in the condition of various soil water content.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.33-39
• /
• 2016

The crystal structure of nylon 56 fibers post extended by drawing process was investigated by synchrotron x-ray scattering measurement. In as-cast fiber, distinct (004) and (020) diffraction peaks were observed and they were related to initial metastable alignment of nylon molecules. With increase in the drawing ratio, (110) peak intensity was increased in vertical direction with decreasing (020) peak. At the same time, (004)' peak evolved position tilted to 29 degrees from the (004) peak. This evolution is directly related to stable crystalline phase of nylon 56 originated from additional formation of hydrogen bondings between N-H and C=O by post drawing process. We also compared density variation, stress-strain curves of the fiber as a function of drawing ratio and strain. The variations of density and tanacity also supported the increase of stable structure of nylon 56.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.979-984
• /
• 1998

The conducting composites were prepared by blending of polyaniline(PANI) as conducting polymer and nylon6,6 as matrix in m-cresol. The PANI was protonated with alkylbenzenesulfonic acid such as camphorsulfonic acid(CSA) or dodecylbenzenesulfonic acid(DBSA). The miscibility of the composites was improved and the electrical conductivity was increased by adding dioctylphthalate(DOP). The electrical conductivity of the composites depending on the amount of protonating agent and PANI complex and the morphology were investigated. When it was protonated with DBSA having long alkyl chain and the content of PANI complex was 25 wt%, the electrical conductivity of the compsosite was increased up to 1.02 S/cm.

• Textile Coloration and Finishing
• /
• v.9 no.4
• /
• pp.47-53
• /
• 1997

To improve the interfacial bonding of carbon fiber-nylon 6 composite, carbon fiber(CF) were oxidized by nitric acid treatment, and two types of graft polymer(GP) of nylon 6-g-polyacrylamide (PAAm) -water dispersable GP(WDGP) and m-cresol solu ble GP(CSGP) were treated as coupling agents. Introduction of polar groups such as -COOH, -OH, etc, on the surface of the oxidized CF was confirmed by IR spectra. The stem polymer of nylon 6 in the coupling agent (GP) could be compatible with'matrix nylon 5, and the grafted branch of PAAm on GP could react to the polar groups on the oxidized CF in composite. The interfacial strength was measured by the transverse tensile test to the fiber direction for single CF embedded nylon 6 film especially prepared and by the pull-out test method. The interfacial strength of the composite reinforced with oxidized CF is greater than that reinforced with unoxidized CF. The interfacial strength of the composite was increased by treatment of coupling agents(GPs) considerably, and the increasing tendency by the WDGP is greater than that by the CSGP. The optimum conditions of coupling agent treatment are as follows: the concentration, adsorption tlme of GP, and curing temperature are 2%, 20 minutes, and $170^{\circ}$, respectively.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.309-317
• /
• 2015

This study is the high contraction processing conditions set by the method of the CPB process. And the ultimate goal of this study is the high contraction of the CPB processing test method that can solve the problems of the high-contraction fabric processing method of the current jet dyeing machine. Non-coating process(CPB process) developed by the expression of a soft touch, light weight, functional and to develop excellent breathable nylon fabric. The nylon fabrics established the optimum processing conditions through the high contraction of the various test conditions, the CPB system.(The benzyl alcohol was used as the main constrictor.) At this time, the warp and weft contraction of nylon fabric was about 20%. And it established the constrictor concentration, the treatment temperature, time of a variety of tests. Also non-coating process(CPB process) can develop soft touch, lightweight, excellent air permeability. As a result, we developed a high contraction nylon fabric having a uniform surface. Manufactured fabric is used for Wind-proof and Down-proof.