• 제목/요약/키워드: Ny

검색결과 361건 처리시간 0.034초

Nano-sized TiCxNy를 함유한 STS 복합체의 특성 (Characteristics of Stainless Steel Composites with Nano-sized TiCxNy)

  • 반태호;박성범;조수정;이동원;;박용일;김성진
    • 한국분말재료학회지
    • /
    • 제18권3호
    • /
    • pp.290-296
    • /
    • 2011
  • Titanium carbonitride is more perspective materials compared to titanium carbide. It can be used in tool industry and special products because of its higher strength, abrasive wear-resistance and especially its strong chemical stability at high temperatures. We produced STS+TiCxNy composite by the spark plasma sintering for higher strength and studied the characteristics. The planar and cross-sectional microstructures of the specimens were observed by scanning electron microscopy. Characterizations of the carbon and nitride phases on the surface of composite were carried out using an X-ray diffractometer. During annealing TiCxNy particles diffusion into STS 430 was observed. After annealing, sintering isolations between particles were formed. It causes decreasing of mechanical strength. In addition when annealing temperature was increased hardness increased. Heterogeneous distribution of alloying elements particles was observed. After annealing composites, highest value of hardness was 738.1 MHV.

나일론 섬유의 길이변화에 따른 섬유보강 바닥마감용 콘크리트의 공학적 특성 (Engineering characteristics of the Fiber Reinforced Floor Finishing Concrete According to the changes of Nylon Fiber Length)

  • 전규남;백대현;정우태;박종섭;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2009년도 추계 학술논문 발표대회
    • /
    • pp.153-156
    • /
    • 2009
  • This study investigated the fundamental properties corresponding to various length changes on NY fiber reinforced concrete. For results of fresh concrete, the slump and air content were declined, but the unit volume weight and vebe time were increased. For the hardened concrete properties, the compressive strength showed increasing tendency according to the NY fiber length. The dry and autogenous shrinkage also decreased compared with Plain. Generally, the caes that 19 mm NY fiber was used was better than any other cases.

  • PDF

Optimal filter materials for protist quantification via droplet digital PCR

  • Juhee Min;Kwang Young Kim
    • ALGAE
    • /
    • 제39권1호
    • /
    • pp.51-56
    • /
    • 2024
  • The use of droplet digital polymerase chain reaction (ddPCR) has greatly improved the quantification of harmful protists, outperforming traditional methods like quantitative PCR. Notably, ddPCR provides enhanced consistency and reproducibility at it resists PCR inhibitors commonly found in environmental DNA samples. This study aimed to determine the most effective filter material for ddPCR protocols by assessing the reproducibility of species-specific gene copy numbers and filtration time across six filter types: cellulose acetate (CA), mixed cellulose ester (MCE), nylon (NY), polycarbonate (PC), polyethersulfone (PES), and polyvinylidene fluoride (PVDF). The study used two species of Chattonella marina complexes as a case study. Filtration rates were slower for NY, PC, and PVDF filters. Moreover, MCE, NY, PES, and PVDF yielded lower DNA amounts than other filters. Importantly, the CA filter exhibited the lowest variance (38-39%) and the highest determination coefficients (R2 = 0.92-0.96), indicating superior performance. These findings suggest that the CA filter is the most suitable for ddPCR quantification of marine protists, offering quick filtration and reliable reproducibility.

포장재료와 보관온도에 따른 갈은 마의 저장수명 및 품질변화에 관한 연구 (Effects of Packaging Materials and Storage Temperature on the Shelf-life of Korean Grinded Yam)

  • 고의석;원종화;진형석;송기현;전규배;김재능
    • 한국포장학회지
    • /
    • 제20권3호
    • /
    • pp.103-111
    • /
    • 2014
  • 본 연구는 포장 재료와 보관온도에 따른 갈은 마의 품질변화에 관한 연구이다. 실험 측정을 위해 실험군으로는 불투명 차단성 포장재료인 $PET(12{\mu}m)/Al(9{\mu}m)/LLDPE(60{\mu}m)$와 투명 차단성 포장 재료인 $PET(12{\mu}m)/PE(20{\mu}m)/VM-PET(12{\mu}m)/PE(25{\mu}m)$와 차단성 $NY(15{\mu}m)/LLDPE(60{\mu}m)$를 사용하였으며, 일반 $NY(15{\mu}m)/LLDPE(65{\mu}m)$을 대조군으로 사용하였다. 색도 변화에서 갈은 마의 냉장온도($5^{\circ}C$)에서는 L(명도), a(적색도), b(황색도) 모두 뚜렷한 변화를 보이지 않았다. ${\Delta}E$값의 경우도 차단성이 떨어지는 포장재인 NY/LLDPE를 비롯하여 모든 포장재(PET/Al/LLDPE PET/PE/VM-PET/PE차단성NY/LLDPE)들이 1.5~3.0 사이의 값으로 초기 상태보다 색과 외관에서 감지할 정도의 차이만 보이며, 큰 변화를 보이지 않았다. 상온($20^{\circ}C$)에서의 색도 변화는 L(명도), a(적색도), b(황색도) 값이 2일차까지 모든 포장 재료들에서 큰 변화를 보였으며, 차단성이 떨어지는 포장재일수록 6일까지 빠른 갈변현상을 보였다. ${\Delta}E$값의 경우는 PET/Al/LLDPE를 제외한 나머지 포장 재료들에서 12에 근접하거나 12를 넘는 값을 나타내 다른 계통의 색으로 판명 되었다. pH는 모든 포장 재료들에서 냉장($5^{\circ}C$)의 경우 4일차까지 감소하다가 다시 증가하는 변화를 보였고 상온($20^{\circ}C$)의 경우는 모든 포장 재료들에서 저장 기간 8일 동안 계속 감소하는 변화를 보였다. pH변화는 냉장($5^{\circ}C$)과 상온($20^{\circ}C$) 모두 차단성이 좋은 알루미늄이 증착된 PET/Al/LLDPE가 변화가 가장 적었고 차단성이 떨어지는 NY/LLDPE가 큰 변화를 보였다. 점도 변화는 모든 포장 재료에서 냉장($5^{\circ}C$)과 상온($20^{\circ}C$) 모두 저장 기간이 지날수록 점도가 감소하는 변화를 보였는데, 차단성이 가장 좋은 포장재인 PET/Al/LLDPE가점도변화가 가장 적었고 차단성이 떨어지는 포장재일수록 점도변화가 컸다. 특히, 상온($20^{\circ}C$)에서 차단성NY/LLDPE와 NY/LLDPE는 6일 이후에 큰 폭으로 감소해 상품가치가 거의 없었다. 미생물의 총 균수에서는 냉장($5^{\circ}C$)의 경우는 저장기간 8일 동안 NY/LLDPE을 제외한 모든 포장재들에서 총 균수의 변화를 거의 보이지 않았다. 이는 저온저장이 미생물의 생육 조건에 맞지 않기 때문이라고 사료된다. 상온($20^{\circ}C$)에서는 4일차까지 큰 변화를 보이지 않다가 NY/LLDPE에 저장된 갈은 마에서 기준치 이상의 총 균수가 검출되어 상품으로서의 가치를 잃었고 다른 포장재는 6일까지 변화를 보이지 않다가 그 이후에 기준치를 초과하였다. 관능평가는 냉장($5^{\circ}C$)의 경우는 크게 변화를 보이지 않았지만 상온($20^{\circ}C$)의 경우 3일차까지는 맛이나 향미를 평가할 수 있었지만, 4일차가 되면서 갈변 현상이 초기보다 많이 진행되어, 향이나 외관에서 평가자들이 거부감을 느꼈고 맛 또한 평가할 수 없을 정도로 상태 변화를 일으켜 4일차 이후로는 관능평가가 불가능하였다.

  • PDF

폭렬방지공법 변화에 따른 RC 기둥부재의 내화특성 (Fire Resistant Properties of the RC Columns Applying Various Splling Prevention Methods)

  • 한천구;배장춘;이종석;이찬영
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제13권3호통권55호
    • /
    • pp.119-126
    • /
    • 2009
  • 본 연구에서는 RC 기둥의 폭렬방지를 위하여 유기섬유의 혼입방식, 내화보드 부착방식, 스프레이 방식의 폭렬방지공법에 따른 내화특성을 검토하였는데, 그 결과를 요약하면 다음과 같다. 굳지않은 콘크리트의 특성으로, 유기섬유의 혼입율이 증가에 따른 유동성은 저하하는 것으로 나타났고, 섬유의 종류에 따라서는 NY섬유를 혼합한 경우 가장 양호하였다. 공기량은 NY섬유가 가장 적게 저하하였고, 그 다음으로 PVA, PP순이었다. 경화 콘크리트의 특성으로, 압축강도는 28일 재령에서 50MPa이상으로 섬유의 혼입율이 증가할 수록 약간 크게 나타났다. 내화시험후 폭렬특성으로, 유기섬유 혼입방식의 경우 PVA섬유를 제외한 PP섬유, NY 섬유는 혼입율 0.05%이상에서 폭렬이 발생하지 않는 것으로 나타났다. 스프레이 방식의 경우는 모든 마감재 부분에서 부분적인 폭렬이 발생하였을 뿐, 모재 콘크리트는 폭렬이 발생하지 않고 본래의 형상을 그대로 유지하는 것으로 나타났다. 또한, 보드방식의 경우는 보편적인 일반 건식공법인 경우를 제외한 건식공법 시공 후 내화페인트로 연결철물을 도포한 경우, 내화모르터로 차폐한 경우, 경량기포 콘크리트로 그라우트 한 경우는 모두 폭렬이 발생하지 않고 본래의 형상을 그대로 유지하고 있었다. 질량감소율은 플레인 콘크리트를 제외한 내화시공공법변화에 따라서 공히 8%미만으로 비교적 양호하게 나타났다.

저장온도 및 포장방법이 풋땅콩 품질에 미치는 영향 (Effects of Storage Temperature and Packaging Methods on the Quality of Raw and Boiled Vegetable Peanut)

  • 최윤희;정영근;박기훈;김영두
    • 한국식품저장유통학회지
    • /
    • 제9권3호
    • /
    • pp.267-270
    • /
    • 2002
  • 땅콩의 새로운 소비형태인 풋땅콩의 적정 저장방법을 구명하고자 생협실 및 증자협 실을 상온 및 4$^{\circ}C$에서 저장 중 품질변화를 조사한 결과를 요약하면 다음과 같다. 수분함량은 상온 및 4$^{\circ}C$에서 저장기간이 경과할수록 감소되는 경향이었으며 생협실과 증자협실 모두 상온저장이 4$^{\circ}C$저장보다 감소율이 높았으며, Ny/LDPE film 진공포장이 LDPE film 포 장보다 감소율이 낮았고 증자협실이 생협실보다 감소율이 높았다. 상온 및 4$^{\circ}C$저장 증자땅콩의 협 색상은 저장당시와 유사하게 갈변되지 않았으나, 생협은 상온 및 4$^{\circ}C$의 진공포장에서 개봉후 심한 갈변현상을 나타냈다. 상온저장은 생협과 증자협 모두 저장 후 2일째, 4$^{\circ}C$저장은 저장 후 21일째 변질되기 시작하였으며, 생협을 망에 넣어 4$^{\circ}C$에 저장한 경우 30일 후에도 변질되지 않았으나 21일 저장후 43%의 수분감소로 딱딱해졌다. 저장기간 중 생협의 L값은 Ny/LDPE film 진공포장시 변화가 적었고 4$^{\circ}C$ LDPE film 포장에서는 생협과 생종실 모두 L값이 감소한 반면 b값은 증가하였으며, 생협의 a값은 4$^{\circ}C$ 진공포장시 저장초기에 비하여 증가하였고, 4$^{\circ}C$ 저장에서 증자종실의 경도는 포장방법에 관계없이 변화가 없었으나 생종실은 저장기간이 경과함에 따라 감소하는 경향을 나타냈다. 이상에서와 같이 풋땅콩의 생협 실저장은 4$^{\circ}C$에서 LDPE 포장으로 7일, Ny/LDPE 진공포장으로 14일간 저장이 가능하고 증자협실은 LDPE 포장 및 Ny/LDPE 진공포장으로 14 일간 저장 가능한데 증자협실의 저장기간 연장을 위해서는 저장온도를 낮추 거나 전처리 방법에 대한 검토가 이루어져야 하며 생협실은 4$^{\circ}C$에서 양파망을 이용할 경우 30일 이상 저장 가능하나 딱딱해지는 문제점이 있으므로 이에 대한 추후 검토가 이루어져야 할 것이다.

$BaORe_2O_3TiO_2$ (Re=La, Nd, Y)계 고주파 유전체의 결정구조 분석 및 온도계수 au_\varepsilon$와의 관련성 (Analysis of the Crystal Structure and the Relation with the Temperature Coefficient au_\varepsilon$ in $BaORe_2O_3TiO_2$ (Re=La, Nd, Y) Microwave Dielectric Ceramics)

  • 김정석;강현주;심해섭;이창희;천채일
    • 한국세라믹학회지
    • /
    • 제36권2호
    • /
    • pp.136-144
    • /
    • 1999
  • 텅스템브론즈형 고주파 유전체의 $BaORe_2O_3TiO_2$(BLT)와 $BaO(Nd({0.77}Y_{0.23})_2O_34TiO_2(B(NY)T)$의 결정구조를 Rietveld 정밀화법으로 분석하였다. 양이온은 X-선 데이터로부터, 산소이온은 중성자 데이터로부터 정밀화한 'combined법'에 의해 가장 신뢰성이 높은 결정구조분석 결과를 얻었다. Mateeva 등이 처음 제시한 결정구조의 결정학적 모순점을 해결하였다. BaORe2O34TiO2(Re=La, Nd, Y) 유전체는 $3\times2$개의 페롭스카이트 블록과 이 블록사이에 형성된 4개의 pentagon-channel로 이뤄진다. Ti-O6팔면체는 tilted 및 변형된 구조를 갖고 있고, 이에 의해 같은 z-층에 있는 Ba 및 Re 이온의 변위되어 초격자(c$\approx$ 7.6$\AA$)를 형성된다. Re 이온반경이 작은 B(NY)T의 Ti-O6 팔면체가 tilting 및 변형이 큰 것으로 나타났다. 유전상수 $\varepsilon_{\gamma}$과 온도계수 $au_\varepsilon$은 BLT의 경우 각각 $109.5, -180 ppm/^{\circ}C$였고, B(NY)T 경우 $76, +40ppm/^{\circ}C$이었다. Re 이온 크기가 작은 시료의 $\tau$$\varepsilon$이 +값을 나타내었다. 복합 페롭스카이트에서 관찰되는 $\tau_\varepsilon$과 팔면체 tilting과의 관계를 본 텅스텐 브론즈 구조재료에서 고찰하였다.

  • PDF

Analysis of feed value for setting an optimal harvest time of whole crop rice cultivars for silage use

  • Ahn, Eok Keun;Hong, Ha Cheol;Won, Yong Jae;Jung, Kuk Hyun;Lee, Jeong Heui;Hyun, Ung Jo
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.73-73
    • /
    • 2017
  • To set an optimal harvest time of main 7 whole crop silage rice cultivars, Nokyang(Ny), Mogwoo(Mw), Mogyang(My), Jungmo1029(Jm1029), Jungmo1038(Jm1038), Nokwoo(Nw) and Yeongwoo(Yw), based on feed value, we analyzed their feed values such as percent crude protein(CP), crude fat(CF), crude ash(CA), neutral detergent fiber(NDF), acid detergent fiber(ADF) and lignin. It was evaluated every 10 days from heading to 40 days after heading(DAH). Total digestible nutrient(TDN) and relative feed value(RFV) was also calculated from ADF and NDF. As results, CP was generally in decline as increasing DAH in Ny, My, Jm1029, Jm1038 and Yw and decreased to 20 DAH in Mw, decreased after increasing to 30 days in Nw. The CP content of Ny was relatively the highest ranged from 5.3% to 10.1% and Mw the lowest 4.5% to 5.2%, compared to others. CF content tend to decrease as DAH increase in Ny, My and Nw and decreased after increasing to 30 days Jm1029, increased after decreasing to 20 days Jm1038 but was not shown distinct trend of increase or decrease in Mw. Especially, that of Yw's CF gradually increased as harvest time late but relative content the lowest from 1.46% to 2.29% among 7 cultivars. The CA content of Ny, My, Jm1029 and Jm1038 approximately decreased as DAH increased and that of Mw was similar to others after heading, Nw decreased after 10 days and Yw increased after flowering. In all 7 cultivars, NDF and ADF had a tendency to decrease as days accumulated, in particular, Yw was the lowest on 30 DAH and so the content of Yw's TDN the highest(71.5%), while the lowest(67.2%) in Nw. For lignin, particularly, Mw tend to be in decline as DAH increase and was the lowest ranged from 1.34% to 1.87%. ADF analyses allows for the evaluation of in vivo digestible dry matter(DDM) and energy availability and NDF analyses provides the best indication of dry matter intake(DMI). Ultimately, the two factors can be combined to derive RFV for forage. RFV in general increased as DAH increased in all cultivars and was in order, Yw>My>Ny> Jm1038>Mw>Jm1029>Nw on 30 DAH. Taken together when these results, despite a slight increase of TDN after 30 DAH except Yw, considering forage yield potential, digestibility of grains and gradual decrease of CP and CF, the yellow ripe stage, about 30 DAH, was appropriate to harvest whole crop rice for silage use.

  • PDF

이중 기능 고분자 전해질 막의 제조 및 탄소 섬유에 니켈, 코발트 기반의 나노와이어/MOF 배열을 통한 고성능 슈퍼커패시터 연구 (Preparation of Dual-functionalized Polymeric Membrane Electrolyte and Ni, Co-based Nanowire/MOF Array on Carbon Cloth for High-performance Supercapacitor)

  • 손혜정;김봉석;권지민;강유빈;이창수
    • 멤브레인
    • /
    • 제33권4호
    • /
    • pp.211-221
    • /
    • 2023
  • 본 연구는 에너지 저장 응용을 위한 PVI-PGMA/LiTFSI 고분자 막 전해질 및 CxNy-C 유연 전극의 합성 및 특성에 관한 연구이다. 이중 기능을 갖는 PVI-PGMA 공중합체는 우수한 이온 전도성을 나타내었으며, PVI-GMA73/LiTFSI200 막 전해질은 1.0 × 10-3 S cm-1의 최고 전도도를 달성하였다. CxNy-C 전극의 전기화학적 성능을 체계적으로 분석하였으며, C3N2-C는 나노와이어와 다면체로 구성된 높은 연결성을 갖는 하이브리드 구조와 이중 Co/Ni 산화물을 포함하여 풍부한 산화환원 활성 부위와 이온 확산을 용이하게 하는 특징으로 인해 958 F g-1의 최고용량 및 최소한의 전하 전달 저항(Rct)을 달성하였다. 흑연 탄소 껍질의 존재는 충전-방전 동안 높은 전기화학적 안정성에 기여하였다. 이러한 결과들은 고성능 에너지 저장 장치인 슈퍼커패시터 및 리튬 이온 전지와 같은 첨단 에너지 저장 장비에 PVI-PGMA/LiTFSI 고분자 막 전해질과 CxNy-C 전극을 활용하는 잠재력을 보여주었으며, 지속 가능하고 고성능의 에너지 저장 기술을 더욱 발전시키는 길을 열어가고 있다.