• Journal of the korean society of oceanography
• /
• v.39 no.1
• /
• pp.35-45
• /
• 2004

Based on the MASNUM wave-current coupled model, the temperature and salinity structures along $36^{\circ}N$ in the Yellow Sea are simulated and compared with observations. Both the position and strength of the simulated thermocline are similar to data analysis. The wave-induced mixing is strongest in winter and plays a key role in the formation of the upper mixed layer in spring and summer. Numerical experiments suggest that in the coastal area, wave-induced mixing and tidal mixing control the vertical structure of temperature and salinity.

• Journal of Korea Water Resources Association
• /
• v.44 no.6
• /
• pp.461-470
• /
• 2011

Abrupt and gradual levee breach analyses on the flat domain were implemented by laboratory experiments and numerical simulations. To avoid the reflective wave from the side wall the experiment was performed in a large domain surrounded by waterway. A numerical model was developed for solving the two-dimensional gradual levee breach flow. The results of the numerical simulation developed in this study showed good agreement with those of the experimental data. However, even if the numerical schemes effectively replicated the trends of the observed water depth for the first shock, there were little differences for the second shock. In addition, even though the model considered the Smagorinsky horizontal eddy viscosity, the location and height of the hydraulic jump in the numerical simulation were not fairly well agree with experimental measurements. This shows the shallow water equation solver has a limitation which does not exactly reproduce the energy dissipation from the hydraulic jump. Further study might be required, considering the energy dissipation due to the hydraulic jump or transition flow from reflective wave.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.6 no.2
• /
• pp.297-306
• /
• 2014

The paper presents the numerical analysis of wave run-up over rubble-mound breakwaters covered by antifer units using a technique integrating Computer-Aided Design (CAD) and Computational Fluid Dynamics (CFD) software. Direct application of Navier-Stokes equations within armour blocks, is used to provide a more reliable approach to simulate wave run-up over breakwaters. A well-tested Reynolds-averaged Navier-Stokes (RANS) Volume of Fluid (VOF) code (Flow-3D) was adopted for CFD computations. The computed results were compared with experimental data to check the validity of the model. Numerical results showed that the direct three dimensional (3D) simulation method can deliver accurate results for wave run-up over rubble mound breakwaters. The results showed that the placement pattern of antifer units had a great impact on values of wave run-up so that by changing the placement pattern from regular to double pyramid can reduce the wave run-up by approximately 30%. Analysis was done to investigate the influences of surface roughness, energy dissipation in the pores of the armour layer and reduced wave run-up due to inflow into the armour and stone layer.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.2
• /
• pp.103-115
• /
• 2018

This paper performs a numerical computation of ship maneuvering performance in waves. For this purpose, modular-type model (MMG (Mathematical Modeling Group) model) is adopted for maneuvering simulation and wave drift force is included in the equation of maneuvering motion. In order to compute wave drift force, two different seakeeping programs are used: AdFLOW based on Wave Green function method and SWAN based on Rankine panel method. When wave drift force is calculated using SWAN program, not only ship forward speed but also ship lateral speed are considered. By doing this, effects of lateral speed on wave drift force and maneuvering performance in waves are confirmed. The developed method is validated by comparing turning test results in regular waves with existing experimental data. Sensitivities of wave drift force on maneuvering performance are, also, checked.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.1
• /
• pp.12-19
• /
• 2014

Tsunamis are ocean waves generated by movements of the Earth's crust. Several geophysical events can lead to this kind of catastrophe: earthquakes, landslides, volcanic eruptions, and other mechanisms such as underwater explosions. Most of the damage associated with tsunamis are related to their run-up onto the shoreline. Therefore, effectively predicting the run-up process is an important aspect of any seismic sea wave mitigation effort. In this paper, a numerical simulation of the behaviors of a floating body near a quaywall during a tsunami is conducted by using a particle method. First, a solitary wave traveling over shallow water with a slope is numerically simulated, and the results are compared with experiments and other numerical results. Then, the behaviors of floating bodies with different drafts are investigated numerically.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.3
• /
• pp.43-52
• /
• 2013

In the present study, a flow analysis for estimating the wave loads acting on a stationary floating body inside a viscous numerical wave tank was performed using the commercial software FLUENT. The governing equations for the viscous and incompressible fluid motion were the continuity and Navier-Stokes equations, and a piston-type wavemaker was employed to reproduce wave environments. First, the optimal simulation conditions were derived through numerical tests for the wavemaker and wave absorber, and then the wave loads and wave run-up on a vertical truncated cylinder were estimated and compared with the experimental and other numerical results.

• Journal of the Society of Naval Architects of Korea
• /
• v.42 no.3
• /
• pp.205-211
• /
• 2005

In this study, a new numerical procedure for the generation of a nonlinear tailored group of waves is presented. The procedure is based on the transient wave group technique. In order to integrate the nonlinearity during the wave propagation in the computational method, the Navier-Stokes equations are applied as governing equations. The governing equations are discretized by finite volume approximation. The deformation of the free water surface in each time step is pursued with a moving grid. A two-dimensional, numerical wave tank for the simulation of the wave propagation is developed and tested in detail. The numeric results are compared first with analytical wave theories and with measurements, in order to examine the correctness of the numerical wave tank. Wave surface elevation and associated fields of velocity and pressure are numerically computed and compared with measurements. Very good agreements show up.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.24 no.2
• /
• pp.125-135
• /
• 2004

This paper describes the calculation technique for guided wave propagation with a semi-analytical finite element method (SAFEM) and shows some results of numerical calculation and guided wave simulation for plates, pipes and railway rails. The SAFEM calculation gives dispersion curves and wave structures for bar-like structures. Dispersion curve software for a pipe is introduced, and also dispersion corves for a rail are given and experimentally verified. The mode conversions in a plate with a defect and in a pipe with an elbow or a defect are shown as examples of our guided wave simulations.

• Ocean Systems Engineering
• /
• v.5 no.4
• /
• pp.245-259
• /
• 2015

The numerical simulation of wave slamming on a 3D platform deck was investigated using a coupled Level-Set and Volume-of-Fluid (CLSVOF) method for overset grid system incorporated into the Finite-Analytic Navier-Stokes (FANS) method. The predicted slamming impact forces were compared with the corresponding experimental data. The comparisons showed that the CLSVOF method is capable of accurately predicting the slamming impact and capturing the violent free surface flow including wave slamming, wave inundation and wave recession. Moreover, the capability of the present CLSVOF method for overset grid system is a prominent feature to handle the prediction of wave slamming on offshore structure.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.2
• /
• pp.68-79
• /
• 2023

Even though submerged breakwater reduces incident wave energy, it redistributes the coastal area's wave-induced current, sediment transport, and morphological change. This study examines the coastal hydrodynamics and the morphological response of a wave-dominated beach with submerged breakwaters installed through field observation and quasi-3D numerical modeling. The pre-and post-storm bathymetry, water level, and offshore wave under storm forcing were collected in Bongpo Beach on the East coast of Korea and used to analyze the coastal hydrodynamic response. Four vertically equidistant layers were used in the numerical simulation, and the wave-induced current was examined using quasi-3D numerical modeling. The shore normal incident wave (east-northeast) generated strong cross-shore and longshore currents toward the hinterland of the submerged breakwater. However, the oblique incident wave (east-southeast) induced the southeastward longshore current and the sedimentation in the northeast area of the beach. The results suggested that the incident wave direction is a significant factor in determining the current and sediment transport patterns in the presence of the submerged breakwaters. Moreover, the quasi-3D numerical modeling is more appropriate for estimating the wave transformation, current, and sediment transport pattern in the coastal area with the submerged breakwater.