• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.186-196
• /
• 2017

In order to resolve the trimming difficulty in rotor CFD calculations, a high-efficiency and improved "delta trim method" is established to compute the blade control settings that are necessary to identify the blade motion. In this method, a simplified model which combines the blade element theory and different inflow models is employed to calculate the control settings according to the target aerodynamic forces, then it is coupled into a CFD solver with unsteady Navier-Stokes equations by the delta methodology, which makes the control settings and aerodynamics calculated and updated in the meantime at every trim cycle. Different from the previous work, the current research combines the inflow model based on prescribed wake theory. Using the method established, the control settings and aerodynamic characteristics of Helishape 7A, AH-1G and Caradonna-Tung rotors are calculated. The influence of different inflow models on trimming calculations is analyzed and the computational efficiency of the current "delta trim method" is compared with that of the "CFD-based trim method". Furthermore, for the sake of improving the calculation efficiency, a novel acceleration factor method is introduced to accelerate the trimming process. From the numerical cases, it is demonstrated that the current "delta trim method" has higher computational efficiency than "CFD-based trim method" in both hover and forward flight, and up to 70% of the amount of calculation can be saved by current "delta trim method" which turns out to be satisfactory for engineering applications. In addition, the proposed acceleration factor shows a good ability to accelerate the trim procedure, and the prescribed wake inflow model is always of better stability than other simple inflow models whether the acceleration factor is utilized in trimming calculations.

• KIEAE Journal
• /
• 제16권1호
• /
• pp.89-94
• /
• 2016

This study is part of three-dimensional(3D) heat transfer analysis program developmental process. The program is being developed without it's own built in 3D-modeller. So 3D-model must be created from another 3D-modeller such as generic CAD programs and imported to the developed program. After that, according to the 3D-geometric data form imported model, 3D-mesh created for numerical calculation. But the 3D-model created from another 3D-modeller is likely to have errors in it's geometric data such as mismatch of position between vertexes or surfaces. these errors make it difficult to create 3D-mesh for calculation. These errors are must be detected and cured in the pre-process before creating 3D-mesh. So, in this study four kinds of filters and functions are developed and tested. Firstly, 'vertex error filter' is developed for detecting and curing for position data errors between vertexes. Secondly, 'normal vector error filter' is developed for errors of surface's normal vector in 3D-model. Thirdly, 'intersection filter' is developed for extracting and creating intersection surface between adjacent objects. fourthly, 'polygon-line filter' is developed for indicating outlines of object in 3D-model. the developed filters and functions were tested on several shapes of 3D-models. and confirmed applicability. these developed filters and functions will be applied to the developed program and tested and modified continuously for less errors and more accuracy.

• 대한조선학회논문집
• /
• 제34권2호
• /
• pp.27-38
• /
• 1997

본 논문에서는 Rankine Source 분포법에 의해 SWATH선의 조파저항 계산을 시도하였다. 자유표변조건은 이중모형근사형(Dawson형)의 자유표면조건과 free stream에 의한 근사형(Kelvin형)을 사용하고, 각각의 경우에 유한 차분법이 아닌 해석적인 방법을 사용하여 수치해석을 하였다. 위 두 가지 패널방법에 의한 수치계산결과, 얇은배 이론과 수정 세장체이론에 의한 계산결과 및 시험 탠값과의 비교를 통하여 각 방법의 특성을 논하였다. 저항실험은 단독형 스트러스와 탠덤값(tendem) 스트러트 SWATH선에 대해서 하였으며, 두 선체간의 거리변화에 따른 결과도 포함시켰다. 개발된 프로그램의 검증을 위해서 Wigley 단독선형 및 쌍동선형에 대해서 계산을 수행하여 발표된 시험결과와 비교하였다. Wigley 단독선형, 쌍동선형 및 SWATH 선형에 대해서 계산한 조파저항 값과 시험값, 관측한 파형과 계산한 파형을 비교하였다.

• Steel and Composite Structures
• /
• 제26권1호
• /
• pp.79-87
• /
• 2018

In order to study the natural vibration characteristics of steel-concrete composite truss beam (SCCTB), the influence of multiple factors such as interface slip, shear deformation and moment of inertia are considered. Afterwards, based on the Hamilton principle the vibration control differential equation and natural boundary conditions of SCCTB are deduced. By solving SCCTB differential equations of vibration control, an analytical calculation method is proposed for analyzing the natural vibration characteristics of SCCTB. The natural frequencies of SCCTBs with different degrees of shear connection and effective lengths are calculated by using the analytical method, and the results are compared against those obtained from ANSYS finite element numerical calculation method. The results show that the analytical method considering the influence factors such as interface slip, shear deformation and moment of inertia are in good agreement with those obtained from ANSYS finite element numerical calculation method. This evidences the correctness of the analytical method and show that the method proposed exhibits improvement over the previously developed theories for the natural vibration characteristics of SCCTB. Finally, based on the analytical method, the influence factors of SCCTB natural vibration characteristics are analyzed. The results indicate that the influence of interface slip stiffness on SCCTB's natural frequency is more than 10% and therefore cannot be neglected. Moreover, shear deformation has an effect of more than 35% on SCCTB's natural frequency and the effect cannot be ignored either in this case too.

• 한국항해항만학회지
• /
• 제33권1호
• /
• pp.65-70
• /
• 2009

대수심의 유체운동을 포텐셜 운동으로 가정하여 자유수면의 거동을 신속히 해석하는 BEM 해석법과 구조물 근방에서 유체의 자유 수면 변화를 계산하기 위하여 NS방정식의 해석으로 CADMAS-SURF 기법을 결합하여 하이브리드 수치기법을 개발하였다. 하이브리드 해석법에서는 반사파를 고려해야 할 넓은 영역에서, 대수심의 영역은 BEM이, 천수역은 CADMAS-SURF가 계산하게 된다. 특히, 하이브리드 모델은 장시간에 걸친 불규칙파의 운동에 대해서는 단독의 CADMAS-SURF을 이용한 계산에 비해 거의 동일한 정확도로 월등히 신속하게 계산할 수 있다. 본 연구에서는 완경사 해저면을 가진 넓은 해역에서, 호안구조물에 내습하는 파랑의 처오름과 월파와 같은 강비선형 파랑장 계산에 결합해석모델을 적용하였다. 계산결과는 각각 토요시마(풍도(豊島))의 규칙과 처오름 실험과 고다(합전(合田))가 제안한 불규칙파의 월파량 산정도와 비교하였다.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.1049-1055
• /
• 2023

농업용 드론을 이용한 방제 작업의 경우 그 경제적 효율성으로 인해 활용도가 증가하고 있으나, 작업자의 숙련도에 따라 효과의 차이가 발생한다. 이에 본 연구에서는 스마트 운영 모드를 적용하여, 수동 비행 모드에서 제어의 단점을 보완하고 이에 대한 수치적 모델을 제안하고, 선행 연구와 비교 검증을 통해 실험적 검증을 수행하였다. 그 결과 농업용 방제 드론들의 분사 시간 및 방제면적을 도출하였고, 수치적 모델과 유사성이 높은 방제용 드론을 선정하여 실험적으로 검증하였다. 이를 통해 수동 비행 모드보다 스마트 운영 모드 적용 시 살포 면적 및 작업(살포 균일도 및 작업 효율)이 상대적으로 효과적인 것을 확인하였다.

• Geomechanics and Engineering
• /
• 제35권6호
• /
• pp.617-626
• /
• 2023

In this study, three-dimensional numerical parametric study was conducted to explore deformation mechanisms of grouped piled-raft-foundation due to lateral load in clays. Effects of load intensity, loading angle, soil stiffness, pile diameter, pile spacing and pile length on foundation deformations were explored. It is found that the smallest and largest movements of pile foundation are induced when the loading angles are 0° and 30°~60°, respectively. By increasing loading angle from 0° to 30°~60°, the resultant horizontal movements and settlements increase by up to 20.0% and 57.1%, respectively. Since connection beams can substantially increase integrity of four piled raft foundation, resultant horizontal movements, settlements and bending moments induced in the piled raft foundation decrease by up to 54.0%, 8.8% and 46.3%, respectively. By increasing soil stiffness five times, resultant horizontal movements and settlements of pile foundation decrease by up to 61.7% and 13.0%, respectively. It is indicated that effects of connection beam and soil stiffness on settlements of pile foundation are relatively small. When pile diameter is less than 1.4 m, deformations of piled raft foundation decrease substantially as a reduction in the pile diameter. Two dimensional groups are proposed to develop calculation charts of horizontal movements and settlements of pile foundation. The proposed calculation charts can directly estimate movements of piled raft foundation under arbitrary loading, ground and pile conditions.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.793-795
• /
• 2002

This study shows method of measuring mechanical stresses during short circuit test, to evaluate numerical analysis of short circuit force. As test model, 400kVA transformers are used, to acquire short circuit force acceleration sensors used. Weak region of winding is found through short circuit test, and verification data of numerical calculation is obtained.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.57-62
• /
• 2003

A general procedure of obtaining reliable one-step kinetics model for hydrocarbon mixture from the fully detailed chemistry is described iin this study. One-step theoretical formulation of the induction parameter model IPM uses a theoretical reconstruction of the induction time database obtained from a detailed kinetics library. Non-dimensional induction time calculations is compared with that of detailed kinetics. The IPM was latter implemented to fluid dynamics code and applied for the numerical simulation of detonation wave propagation. The numerical results including the numerical smoked-foil record show the all the details of the detonation wave propagation characteristics at the cost around 1/100 of the detailed kinetics calculation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2901-2906
• /
• 2007

A solver for icing and condensation of water has been developed. The phase change process was solved by the enthalpy method. For the code validation, the temperature and the phase change from water to ice of the driven cavity were calculated. Also, the melting process of the frost on the windshield glass of an automobile has been simulated. The calculation showed a good agreement with analytical solution and other numerical results. Using the present validated code, the condensation of water vapor has been first tried. The computed results provided some physical features of condensation phenomena even though experimental data and other numerical data were not available. For future work, it is recommended to throughly investigate the effects of boundary conditions on the solution.