• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.225-232
• /
• 2003

The behaviour of ground induced by tunneling of 2arch tunnels may differ from the one caused by usual type tunnels. This paper describe the behaviour created by the size of pilot tunnel and the condition on the construction method of center piller Also, loads acting on the supports of the first tunnel and the center pillar during the excavation of second tunnel is investigated by numerical analyses. The results of numerical analyses are compared to the data records of measurement results, i.e. force on the support system and ground displacement.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2212-2218
• /
• 2015

세 종류의 얕은기초를 지지하는 기초지반의 하중지지거동을 살펴보고자 모래지반과 점토지반을 가정하여 유한요소 해석을 수행하였다. 띠기초를 지지하는 모래지반의 파괴영역의 형상 및 크기는 상대밀도에 따라 달랐으나 점토지반의 경우 강도에 따라 파괴영역에 차이가 거의 없으며 이론에서 고려되는 파괴영역과 유사한 결과를 보였다. 모래지반에 대한 수치해석을 통해 얻은 하중-침하곡선의 형상을 고려해 볼 때 느슨한 모래에 놓인 기초의 경우 거의 관입전단파괴양상을 보였으며 조밀한 모래에 놓인 기초의 경우 극한하중이 뚜렷하지는 않았다. 점토지반에 놓인 기초에 대하여 수치해석을 통해 얻은 하중-침하량곡선의 경우 침하가 급격하게 증가하는 항복점이 존재함을 알 수 있었다. 모래지반에 의해 지지되는 기초에 대해 이론식에 의해 예측된 극한하중은 수치해석에 의한 극한하중보다 큰 값을 보였으며 점토지반에 대해 이론식에 의해 예측된 극한하중은 수치해석에 의한 극한하중과 유사한 값을 보였다. 1 인치 침하기준법에 의해 결정된 극한하중은 수치해석을 통해 얻은 극한하중보다 약간 작은 값을 보여 안전측의 결과를 보였다.

• 한국지반환경공학회 논문집
• /
• 제15권2호
• /
• pp.59-66
• /
• 2014

본 논문에서는 석션파일의 인발거동을 조사하기 위해 유한차분법 상용 프로그램인 FLAC3D를 이용하여 수치해석을 수행하였다. 석션파일의 인발지지력을 전통적인 지지력 식을 이용하여 구하고, 이 값을 파일의 직경, 길이, 그리고 주변 점토의 비배수 전단강도를 변수로 하는 수치해석을 통한 해석 값과 비교하였다. 총 24개의 수치해석 결과를 바탕으로 석션파일의 인발파괴는 석션파일의 배수조건뿐만 아니라 파일의 제원과 주변 지반의 물성값에 의해 형태가 결정되는 것으로 밝혀졌다. 수치해석 결과로부터 석션파일 내부 주면에 발현되는 전단응력을 구하여 활동파괴와 인장파괴 중 어떤 파괴가 발생할 것인지를 결정하는데 사용하였다. 외부주면의 전단응력과 관계없이 높은 내부 전단응력을 얻은 경우 수치해석 내에서 활동파괴가 발생하는 경우가 많았으며, 이는 전통적인 지지력 공식으로부터 얻은 예측과 잘 맞았다.

• 터널과지하공간
• /
• 제2권1호
• /
• pp.152-163
• /
• 1992

The study of rock mass behaviour through a numerical analysis is important for the design, construction and maintenance of large rock caverns. The objectives of the numerical analysis are to design reasonably and construct safely the underground structures, to maintain them soundly after construction and to extend them securely for a desired period of time. Methods of numerical analyses included in this case study are the finite element method, the boundary element method, and the distinct element method. The numerical models are purely elastic, elastoplastic, visco-elastic, visco-plastic, easto-visco-plastic and jointed-discontinuous materials. The results of this case study indicate that the rock mass behaviour could be predicted exactly through continuous comparisons of the numerical results with the in-situ measurements.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.183-190
• /
• 2000

Effective range of Hydraulic Hammer Compaction was studied by numerical analysis instead of empirical method. Numerical analyses were carried out with commercial FEM code, ABAQUS, and verified by comparing the numerical results with field tests of Hydraulic Hammer Compaction. Most of material properties were evaluated by data from laboratory and in-situ tests. Vertical effective range was estimated by distribution curve of plastic strain energy dissipated through soil layers under dynamic load and these results were in good agreement with field tests. Based on verification, the effects of governing properties of Hydraulic Hammer Compaction such as number of hit can be determined by numerical analyses. In addition, vertical effective range can also be determined by Menard's empirical equation using the external work at converging time of plastic strain energy in numerical analysis. This implies that the minimum energy of Hydraulic Hammer Compaction for improvement can be determined by Menard's equation.

• 한국지반공학회논문집
• /
• 제34권8호
• /
• pp.15-26
• /
• 2018

최근, 성능기반 내진설계법이 도입되면서 동적수치해석을 수행하여 지진에 대한 구조물의 실제 거동을 엄밀히 평가하는 것이 필요해지고 있다. 성능기반설계를 수행하려면 수치해석 모델링의 적용성을 검증하는 것이 매우 중요하다. 그러므로, 본 연구에서는 2차원 수치해석을 수행하여 말뚝지지 구조물의 동적 거동을 분석하고 수치모델링 기법과 입력변수값 산정방법을 제안하였다. 수치모델링의 적용성은 느슨한 사질토 지반에 설치된 무리말뚝의 동적 원심모형실험 결과와 비교하여 검증하였다. 본 수치모델링은 동적 지반 물성값, 지반-말뚝 상호작용, 경계조건, 무리말뚝과 구조물의 모델링 등 원심모형실험의 실제 조건을 반영하도록 모델링하였다. 그 결과, 수치해석에서 얻어진 결과는 지반 내 가속도 변화, 말뚝의 모멘트와 변위, 그리고 구조물의 변위와 가속도 결과를 잘 모사하였다. 그러므로, 본 수치모델링 기법과 입력변수 산정기법이 무리말뚝의 내진성능을 평가할 때 유용하게 적용될 수 있을 것으로 판단된다.

• 한국해양공학회지
• /
• 제20권5호
• /
• pp.49-56
• /
• 2006

In this thesis, centrifuge model experiments and numerical analyses were carried out to investigate the behavior of an excavated slope in soft clay ground. Centrifuge model tests were performed with various slopes for the excavated ground, such as 1:1.5 and 1:2. Pore pressuresthe model ground were measured to find their effects on the stability of the excavated slope. These experiments showed that the model with 1:2.5 maintained its stability within a short period of time and failed gradually. Therefore, anexcavated slope of soft soil with this slope might maintain stable conditions within a certain time. The mode1 with a 1:3 slope was observed to maintain a very stable condition, showing insignificant deformation in the ground after being excavated. Numerical analyses with PLAXIS, a commerciallyavailable software implemented with the finite element numerical technique, were performed to find the pore pressure distribution within the ground mass and the deformation of the soil. From the results of numerical analysis, a negative pore pressure was developed after the excavation and thus the stability of the slope was maintained. The safety factor for slope failure was found to decrease with time because of the dissipation of negative pore pressure with time.

• Journal of Welding and Joining
• /
• 제17권5호
• /
• pp.77-82
• /
• 1999

Resistance spot welding process is completed in very short time and there are many factors affecting on the generation of heat. It is difficult to control these experimental factors and monitor distribution of the temperature and stresses in the experimental analysis case. and too much time and expense are required for the experimental trials to fine proper welding condition. So numerical analyses have been attempted steadily, but most numerical analyses on the resistance spot welding are mainly focused on thermal behavior. Therefore, in this paper, the numerical analysis of mechanical behavior as well as heat conduction is carried out for the spot welding process. For this numerical analysis, axial symmetric computer program for the spot welding analysis by F.E.M. has been developed considering heat conduction and thermal elastic-plastic theory. Material properties depending on temperature such as density, heat conductivity, heat expansion coefficient, specific heat, yield stress, elastic modulus, and specific resistance are considered. Using the results of temperature distribution obtained from heat conduction analysis, the thermal elastic-plastic analysis is carried out to clarify mechanical behavior of spot welded specimen. In order to evaluate the effect of residual stresses, numerical analyses are carried out under tension-shear load in two cases respectively; one with residual stress, the other without residual stresses.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.511-529
• /
• 2023

This paper aims to better understand the bonding behavior in Reinforced Concrete beams strengthened with an Ultra-High Performance Fiber Reinforced Concrete (RCUHPFRC) layer on the compression side using experimental tests and numerical analyses. The UHPFRC mix design was obtained through an optimization procedure, and the characterization of the materials included compression and slant shear tests. Flexural tests were carried out in RC beams and RC-UHPFRC beams. The tests demonstrated a debonding of the UHPFRC layer. In addition, 3D finite element analyses were carried out in the Abaqus CAE program, in which the interface is modeled considering a zero-thickness cohesive-contact approach. The cohesive parameters are investigated, aiming to calibrate the numerical models, and a sensitivity analysis is performed to check the reliability of the assumed cohesive parameters and the mesh size. Finally, the experimental and numerical values are compared, showing a good approximation for both the RC beams and the RC strengthened beams.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1566-1571
• /
• 2003

The cold plate used for a CEU(Control Electronics Unit) of an EV(Electric Vehicle) is extremely important since the dissipation of the heat generated from power devices like IGBT(Insulated Gate Bipolar Transistor) and diode has a significant effect on the performance as well as the durability of the CED. The cold plate consists of seven power devices, and coolant flows through the passage bonded to a groove of the cold plate. In order to find out heat transfer and pressure drop characteristics, series of numerical analyses for the cold plate with enhanced coolant passages were conducted. Based on results of the numerical analyses, an improved model of the cold plate has been proposed. The experiments under the various conditions have been conducted to compare the performance of the proposed cold plate to the present one. As a result of the numerical analyses together with the experiments, the ideal design of the cold plate could be offered.