• Journal of Welding and Joining
• /
• 제35권2호
• /
• pp.13-22
• /
• 2017

In laser full penetration welding process, full penetration hole(FPH) is formed as a result of force balance between the vapor pressure and the surface tension of the surrounding molten metal. In this work, a three-dimensional numerical model based on a conserved-mass level-set method is developed to simulate the transport phenomena during laser full penetration welding process, including full penetration keyhole dynamics. Ray trancing model is applied to simulate multi-reflection phenomena in the keyhole wall. The ghost fluid method and continuum method are used to deal with liquid/vapor interface and solid/liquid interface. The effects of processing parameters including laser power and scanning speed on the resultant full penetration hole diameter, laser energy distribution and energy absorption efficiency are studied. The model is validated against experimental results. The diameter of full penetration hole calculated by the simulation model agrees well with the coaxial images captured during laser welding of thin stainless steel plates. Numerical simulation results show that increase of laser power and decrease of welding speed can enlarge the full penetration hole, which decreases laser energy efficiency.

• Smart Structures and Systems
• /
• 제22권6호
• /
• pp.643-662
• /
• 2018

One of the methods for investigation of mechanical behavior of materials is numerical simulation. For simulation, its need to model behavior is close to real condition. PFC is one of the rock mechanics software that needs calibration for models simulation. The calibration was performed based on simulation of unconfined compression test and Brazilian test. Indeed the micro parameter of models change so that the UCS and Brazilian test results in numerical simulation be close to experimental one. In this paper, the effect of four micro parameters has been investigated on the uniaxial compression test and Brazilian test. These micro parameters are friction angle, Accumulation factor, expansion coefficient and disc distance. The results show that these micro parameters affect the failure pattern in UCS and Brazilian test. Also compressive strength and tensile strength are controlled by failure pattern.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권2호
• /
• pp.209-218
• /
• 2017

Sea ice is the main factor affecting the safety of the Arctic engineering. However, traditional numerical methods derived from classical continuum mechanics have difficulties in resolving discontinuous problems like ice damage. In this paper, a non-local, meshfree numerical method called "peridynamics", which is based on integral form, was applied to simulate the interaction between level ice and a cylindrical, vertical, rigid structure at different velocities. Ice in the simulation was freshwater ice and simplified as elastic-brittle material with a linear elastic constitutive model and critical equivalent strain criterion for material failure in state-based peridynamics. The ice forces obtained from peridynamic simulation are in the same order as experimental data. Numerical visualization shows advantages of applying peridynamics on ice damage. To study the repetitive nature of ice force, damage zone lengths of crushing failure were computed and conclude that damage zone lengths are 0.15-0.2 times as ice thickness.

• 수산경영론집
• /
• 제48권3호
• /
• pp.47-59
• /
• 2017

Fish mortality is the most important success factor in aquaculture management. To order fingerlings considering the effect of mortality is a important problem in aquaculture farm. This study is aimed to decision the number and size of fry in aquaculture farm. This study build the mathematical model that finds the value of decision variable to minimize total cost that sums up the fingerling purchasing cost, aquaculture farm operating cost and feeding cost under mortality constraint. The proposed mathematical model involve biological and economical variables: (1) number of fingerlings (2) fish growth rate (3) mortality (4) price of a fry (5) feeding cost, and (6) possible order period. Numerical simulation model presented here in. The objective of numerical simulation is to provide for decision makers to analyse and comprehend the proposed model. When extensive biological and cost data become available, the proposed model can be widely applied to yield more accurate results.

• KCI Concrete Journal
• /
• 제13권2호
• /
• pp.67-74
• /
• 2001

In this study, a numerical model for the simulation of reinforced concrete columns subject to cyclic loading is presented. The model consists of three separate models representing concrete, reinforcing steel bars and bond-slip between a reinforcing bar and ambient concrete. The concrete model is represented by the plane stress plastic-damage model and quadrilateral finite elements. The nonlinear steel bar model embedded in truss elements is used for longitudinal and transverse reinforcing bars. Bond-slip mechanism between a reinforcing bar and ambient concrete is discretized using connection elements in which the hysteretic bond-slip link model defines the bond stress and slip displacement relation. The three models are connected in finite element mesh to represent a reinforced concrete structure. From the numerical simulation, it is shown that the proposed model effectively and realistically represents the overall cyclic behavior of a reinforced concrete column. The present plastic-damage concrete model is observed to work appropriately with the steel bar and bond-slip link models in representing the complicated localization behavior.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권5호
• /
• pp.589-596
• /
• 2006

This study aims to propose a new model axial flow fan which attachs centrifugal blades, and to investigate the effect of centrifugal blades on the performance improvement of new model axial flow fan. A numerical simulation has been conducted using STAR-CD commercial code to solve the three dimensional incompressible Navier-Stokes equation for high Reynolds number $k-{\epsilon}$ turbulent model. Numerical simulation is carried out to investigate the detail phenomenon in the flow field and performance characteristics of new model and normal model fan. Calculation results are compared with normal model's results to investigate which centrifugal blades effect on velocity profile and pressure distribution at various flow field positions. and calculation results show that new model fan can improve the performance of total pressure.

• 대한토목학회논문집
• /
• 제29권1B호
• /
• pp.1-9
• /
• 2009

본 연구에서는 일반적으로 유량 자료의 생산을 위해 널리 사용되는 수위-유량관계의 고리형 특성 분석과 수치모형에 의해 이를 재현하는 것을 목적으로 하고 있다. 팔당대교 등 3개 지점의 연속적인 수위와 유량자료를 분석한 결과 여러 사상에서 매우 강한 고리형 특성이 발생하는 것을 확인하였다. 이는 기존 단일 수위-유량관계가 많은 오차를 포함할 수 있다는 것을 나타낸다고 할 수 있다. 한강 본류부에 일차원 수치모형을 이용하여 다양한 홍수사상에 적용하고, 그 결과를 실측 수위와 비교하여 검증하였다. 특히 2007년 홍수사상의 경우, 한강대교에 설치된 ADVM을 이용한 연속적인 유량측정 자료와 비교하여 수치모형에 의한 간접유량 산정의 적용성을 검증하였다. 검증된 수치해석 결과로부터 주요지점의 수위-유량관계를 작성한 결과 실측치와 유사한 형태를 구할 수 있었는데, 적절히 보정되고 검증된 수치모형을 이용하면 고리형 특성이 매우 강한 수위-유량관계의 재현이 가능함을 분석하였다. 본 연구 결과는 기존 단일 수위-유량관계의 오차 분석과 수치모형을 이용한 고리형 수위-유량관계 개발에 기여할 수 있을 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제24권3호
• /
• pp.180-188
• /
• 2014

현대자동차그룹은 HSM이라고 불리는 간략화된 차량 모델에 대하여 썬루프 버페팅 현상의 실험적인 조사를 시행하였다. 현대자동차그룹은 어떤 CFD솔버가 충분한 정확도를 가지고 썬루프 버페팅 현상을 예측하는지 조사하기 위해 상용CFD공급업체의 참여를 요청하였다. ANSYS Korea는 이번 조사에 참여하여 ANSYS fluent를 이용하여 HSM의 썬루프 버페팅에 대한 수치해석을 수행하였다. 먼저 유동장 검증을 위해 풍속 60 km/h에 대하여 썬루프가 닫힌 HSM모델에 대하여 해석을 수행하였다. HSM상부 면의 세 지점에서 속도 분포를 예측하였고, 이는 시험결과와 비교되었다. 그런 다음 고해상도 난류 모델인 DES를 이용한 해석이 전 풍속영역에 걸쳐 수행되었다. 버페팅 주파수와 버페팅 음압레벨이 예측되었고, 이는 시험결과와 비교되었다. 이를 통해 실제 차량 개발을 위한 CFD의 예측 가능성에 대하여 결론을 얻을 수 있었다.

• International Journal of Concrete Structures and Materials
• /
• 제9권1호
• /
• pp.45-54
• /
• 2015

This paper describes a three-dimensional approach to modeling the nonlinear behavior of partial-depth precast prestressed concrete bridge decks under increasing static loading. Six full-size panels were analyzed with this approach where the damage plasticity constitutive model was used to model concrete. Numerical results were compared and validated with the experimental data and showed reasonable agreement. The discrepancy between numerical and experimental values of load capacities was within six while the discrepancy of mid-span displacement was within 10 %. Parametric study was also conducted to show that higher accuracy could be achieved with lower values of the viscosity parameter but with an increase in the calculation effort.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.407-410
• /
• 2006

This study describes a simulation of two-dimensional bubble forming and motion by the Lattice Boltzmann Method with the phase field equation. The free energy model is used to treat the interfacial force and deformation of binary fluids system, drawn into a T-junction the micro channel. A numerical simulation of a binary flow in a cross-junction channel is carried out by using the parallel computation method. The aim in this investigation is to examine the applicability of LBM to numerical analysis of binary fluid separation and motion in the micro channel.