• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.2
• /
• pp.179-186
• /
• 2007

The decrease of masticatory function caused by tooth loss leads to a decrease of cerebral blood flow volume resulting in impairment of cognitive function and learning memory disorder. However, the reduced mastication-mediated morphological alteration in the central nervous system (CNS) responsible for senile deficit of cognition, learning and memory has not been well documented. In this study, the effect of the loss of the molar teeth (molarless condition) on the hippocampal expression of glial fibrillary acidic protein (GFAP) protein was studied by immunohistochemical techniques. The results were as follows : 1. The molarless mice showed a lower density of pyramidal cells in the cornu ammonis 1 (CA1) and dentate gyrus (DG) region of the hippocampus than control mice. 2. Immunohistochemical analysis showed that the molarless condition enhanced the time-dependent increase in the cell density and hypertrophy of GFAP immunoreactivity in the CA1 region of the hippocampus. The molarless condition enhanced an time-dependent decrease in the number of neurons in the hippocampal formation and the time-dependent increase in the number and hypertrophy of GFAP-labeled cells in the same region. The data suggest a possible link between reduced mastication and histological changes in hippocampal formation that may be one risk factor for senile impairment of cognitive function and spatial learning memory.

• Journal of Korean society of Dental Hygiene
• /
• v.13 no.3
• /
• pp.419-424
• /
• 2013

Objectives : This study aimed to explore the influence of food intake and oral health behaviors on dental caries in juveniles. Methods : A total of 2,129 juveniles completed a questionnaire survey to identify the presence of permanent teeth caries, behaviors relevant to oral health and food intake based on the fourth National Health and Nutrition Survey. Results : Multiple logistic regression analysis showed that higher occasions of intake of carbonated drinks significantly cased dental caries in the meanwhile oral health behavior and the number of toothbrushing was in reverse proportion to dntal caries. The risk of dental caries was higher in the group of lower frequency of toothbrushing and intake of carbonated drink. Conclusions : Carbonated drinks intake and the number of toothbrushing is closely related to dental caries. So it is very important to develop oral health education program in order to improve eating habits and toothbrushing habits in juveniles.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1288-1290
• /
• 2005

This paper analyzed the characteristics of the claw pole PM step motor by using 3D FEM. As the magnetization occurs along the z-axis of the motor, it is necessary to apply 3D FEM for analysis of the claw pole PM step motor. Considering the computation time, however, the number of the analysis model is minimized by using the "Design of Experiments(DOE)". By using the "DOE", efficient analysis was able to be done. To see the effects of the design factors, the 3D FEM is applied only to the selected models. As the design factors, the teeth shape, the number of turns and the permanent magnet overhang was selected.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.12 no.5
• /
• pp.34-39
• /
• 2003

The paper will present chip formation mechanism and surface integrity generation mechanism based on the systematical experimental tests. Some basic factors such as the end milling cutter tooth number, cutting forces, cutting temperature, cutting vibration the chip status, the surface roughness, the hardness distribution and the metallographic texture of the machined surface layer are involved. The chip formation mechanism is typical thermal plastic shear localization at high cutting speed with less number of shear ribbons and bigger shear angle than that at low speed, which means lack of chip deformation. The high cutting speed with much more cutting teeth will be beneficial to the reduction of cutting forces, enlarge machining stability mot depression of temperature increment anti-fatigability as well as surface roughness. The burrs always exist both at low cutting speed and at high cutting speed. So the deburring process should be arranged for milling titanium alloy in my case.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1949-1957
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of a planetary gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The minimum rim thickness limit should be determined considering not only the critical stress but also the load sharing. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.

• Journal of Oral Medicine and Pain
• /
• v.43 no.4
• /
• pp.118-124
• /
• 2018

Purpose: Age estimation is often used in the identification of living persons. Various methods are used for age estimation using teeth, and there are many studies on the methodology. But the study of changes in the social aspects of age estimation with the passage of times is still insufficient. Therefore, the purpose of this study is to analyze the age estimation cases in the social aspects and to investigate the changes of age estimation cases in Jeollabuk-do. Methods: From January 2008 to December 2015, 76 cases of age estimation were collected. The collected data were organized and analyzed. The distribution of patients by age and year, the difference between alleged and registered age, the purpose of age estimation, and regional distribution were examined. In addition, we compared the previous study which analyzed the age estimation cases in Jeollabuk-do from 2000 to 2007. Results: According to the distribution by age, the age distribution was the largest in the 50s and 60s, with 69.8%. The most reason to correct age was related to welfare benefits (38.2%), and most of the people who corrected for welfare benefits were over 50 years old. The age correction for purpose of welfare benefits existed every year during the study period. As the result of comparison with previous study, total number of age estimation cases was decreased very sharply, and distribution by age group was also changed. Conclusions: Changes in age estimation cases were observed when compared to the previous study. A significant decrease in the total number of age estimation cases was observed, but the number of age estimation in the 50s did not decrease. Although the total number of age estimation requests decreases, age estimation in the elderly are likely to persist. Thus, it is necessary to study new age estimation methods suitable for the elderly.

• Journal of Oral Medicine and Pain
• /
• v.20 no.1
• /
• pp.171-183
• /
• 1995

This study was carried out to investigate the relationship between tensed mandibular positions, muscle tenderness and EMG activity, respectively, and between range of motion of the neck and sternocleidomastoid muscle tenderness. Under stressful conditions, most of people take several types of behavioral patterns. Two of them observed frequently are clenching of teeth and grasping of fist. Prolonged clenching or grasping should increase electromyographic activity of associated muscle, especially muscles of mastication and neck muscles and will cause hyperfunction, dysfunction and muscle pain. So it is necessary to relate EMG activity with muscle pain. The author performed routine clinical examination in 47 patients with Temporomandibular Disorders, especially for presence or absence of muscle tenderness. Mandibular rest position was used as a baseline reference position and two more position in which EMG activity was taken were rest postion with grasping of fist and teeth clenching position. BioEMG of Biopak system (Bioresearch Inc, USA) was used for measuring of integrated EMG in masseter, anterior temporalis, anterior belly of digastic muscle and sternocleidomastoid muscle. To measure of the range of neck motion. CROM(Cervical-Range-of Motion, USA) was used. The obtained results were as follows : 1. EMG activity of all muscles except in masseter was higher in grasping of fist than those in rest position and there were significant correlation in EMG activity between the two position except in anterior belly of digastric muscle. 2. When comparing EMG activity between tender and non-tender muscle, all examined muscles did not show any significant difference. From this data, we could conclude that EMG activity was generally not changed with tenderness, of couse, it might be dependent with degree of muscle tenderness. 3. Number of tender points in examined muscles was also not significantly different between in patients with masticatory muscle disorders and in patients with internal derangement. 4. Cervical posture and range of motion of the neck was not differed significantly between in patients with and in patients without tenderness of sternocleidomastoid muscle.

• Imaging Science in Dentistry
• /
• v.52 no.1
• /
• pp.67-74
• /
• 2022

Purpose: To focus on the effects of the presence of mesiodens on adjacent teeth and to investigate the timing of its safe removal. Materials and Methods: Cone-beam computed tomography examinations, obtained at Okayama University Hospital over a three-year period, were inspected. Data were recorded including the number of mesiodens; associated abnormalities; and the relationship with neighboring structures. Depending on multiple factors, the risk of developing complications due to early extraction of a mesiodens was divided into three categories: high, medium, and low risk. Results: A total of 5,958 cone-beam computed tomography exams were obtained, 460 patients aged 3-85 years were diagnosed with a total of 568 mesiodens, 382 (67.3%) of which were discovered in young patients (age <10 years), and 333 (87.2%) of these were associated with abnormalities. Regarding the risk categories, 11 (1.9%) were considered to be in the high-risk, five (0.9%) in the medium-risk and 552 (97.2%) in the low-risk categories. Moreover, eight out of 11 high-risk mesiodens were extracted and no post-operative complications have been seen. Conclusion: As the results showed that no postoperative complications were seen in all the extracted cases of high-risk mesiodens, this indicates the possibility of safe extraction at an early age which could reduce related future complications.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.5
• /
• pp.360-364
• /
• 2021

Objectives: The purpose of this study was to evaluate the clinical and radiographic characteristics of idiopathic bone cavity (IBC) to determine the effect of surgical intervention on the process of healing. Materials and Methods: All cases diagnosed with IBC during the period of 2011 to 2020 at our Department of Oral and Maxillofacial Surgery were searched. Ninety cases were retrieved. The features evaluated were sex, age, contour of the lesion, number of teeth involved, site, history of trauma, and postoperative healing pattern. The significance of differences was assessed by Mann-Whitney U test and chi-square test. Results: The female:male ratio showed no predilection toward either sex (0.9:0.8). The mean age of the collected sample was 22.05±14.38 years, and the age ranged from 10 to 58 years. All cases presented in the mandible and showed well-circumscribed radiolucency. Margins were either scalloped or round in shape, and the size varied from one tooth to six teeth involvement. Seventy cases involved three or fewer roots. Three cases showed bilateral lesion. Four cases had a history of trauma at the area of the lesion. Fifty-one cases were followed for six months after surgery, and all showed increased bone density at the lesion. Conclusion: There is no definitive radiological or clinical feature of IBC. Considering the diversity of clinical and radiological features, such a diagnosis relies primarily on surgical findings of an empty bone cavity with no epithelial lining. Our data suggest that surgical intervention be the first choice of treatment as opposed to observation.

• The Journal of the Korean dental association
• /
• v.52 no.12
• /
• pp.783-794
• /
• 2014

Since the introduction of non-thermal atmospheric pressure plasma in the field of the dentistry, numerous applications have been investigated. Especially with its advantages over existing vacuum plasma in terms of portability, low cost, and non-thermal damage, it can be directly applied in the oral cavity, giving number of potentials for dental application. First, possible application of non-thermal atmospheric pressure plasma in the field of dentistry is relation to dental caries and periodontal diseases. Teeth and alveolar bones are one of the strongest bony structures in our body, but it cannot be regenerated when they are damaged by dental caries or periodontal disease. Hence many studies to prevent such diseases have been carried out, though no perfect solution has been found yet. With recent studies of modifying surfaces through non-thermal atmospheric pressure application that can prevent attachment of bacteria, or studies on bactericidal effects of non-thermal atmospheric pressure plasma can be applied here to prevent oral pathogen and 'biofilm' attachment to the surface of teeth or directly eliminate the dental caries/periodontal disease causing germs. Secondly, non-thermal atmospheric pressure application will be useful on the surface of dental implant. It is well known that the success of dental implant surgery depends on the process known as 'osseointegration' that result from osteoblast attachment, proliferation and differentiation. As the application of non-thermal atmospheric pressure plasma on the surface of dental implant just before its introduction by the chair-side of dental surgery. Despite its long history, the generation of non-thermal atmospheric pressure plasma has been greatly increased with its application in dentistry.