• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1458-1465
• /
• 2010

A lot of dredging and reclaming projects are recently under way in Korea for the efficient use of limiting land space. Saemanguem area is special case of reclaiming by dredged soil. In case of a confined disposal of dredged soils by a pump dredger, generally coarse grained soils are separated from fines with dropping at the near part of the pump dredger. This kind of seperation of fine contents could be a factor of liquefaction by earthquake. In Korea, recently, earthquakes with magnitude of 3.0 or higher are distinctively increasing in 1990. In this study, cyclic shear characterics of Saemanguem Dredged sand depending on fine content were analyzed. A series of undrained cyclic triaxial test with cyclic stress ratio ($\sigma_d/{2\sigma_{{\upsilon}c}}'$) were performed on both isotropic consolidated specimen and sand with fine contents of 0%, 5%, 15%, 30%, 40% under the effective vertical stress of 100kPa and 50% and 60%, 70% of relative density for fine content of 0%, respectively. In the test results, cyclic shear strength increased by increasing of cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) with increasing the relative density at the same number of cyclic under the effective confining pressure of 100kPa. It is almost highest the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10% at fine content of 15% between Cyclic stress ratio($\sigma_d/{2\sigma_{{\upsilon}c}}'$) value at cyclic number five and fine content. Number of cyclic is 30 under the effective vertical stress of 100kPa, 70% of relative density for fine content of 15%. when the cyclic stress ratio at each relative density was compared at cyclic number five, the double amplitude(DA) 1%, 3%, 5%, 7.5% and 10%, and the pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value were compared; under the relative density of 70% and the effective confining pressure of 100kPa. The pore-pressure ratio (${\Delta}u/{\sigma'}_c$) 0.95 value showed a similar trend to the double amplitude (DA) 5% line.

• Journal of Korean Academy of Nursing Administration
• /
• 제9권2호
• /
• pp.243-250
• /
• 2003

Purpose : The purpose of this study was to suggest the number about the projected workforce of Certified Insurance Reviewer Nurses(CIRN) in Korea. Method : The following methods were used for this study: 1) national and international internet data were collected. 2) demand model was used for the prediction of the projected workforce of CIRN. 3) experts in insurance reviewing were contacted to get an opinion and information about the criteria of distribution and scope of CIRNs, 4) we figured out the maximum and minimum number of CIRN Korea needed as followed method, the maximum number was estimated that one CIRN would review 150 cases of Detailed Accounts for Examination and Treatment and the minimum was estimated 200 cases of it. 5) time series regression equation analysis was used for the prediction of number of CIRNs for the year 2003 to 2010. Result: 1) The prediction of CIRNs is as follows, there will be 2,313$\sim$2,827 of CIRN demanded in 2002, 2,500$\sim$3,069 in 2005 and 2,806$\sim$3,466 in 2010. 2) It is really desirable that CIRNs not only work for reviewing the detailed accounts for examination and treatment in hospital but also for inspecting allowance in individual insurance company. Conclusion : It is very desirable that the CIRN advocate the clients' rights because they will work for them satisfactory rather than other hospital experts group. But before settling the system of the CIRN in Korea, there would be its own professional role identity and a code of conduct.

• Journal of Environmental Science International
• /
• 제27권6호
• /
• pp.383-399
• /
• 2018

In the present study, the community distribution, functional feeding groups, and habitat groups of the benthic macroinvertebrates from Gayasan National Park were investigated at eight different sites from 2015 to 2016. The correlation between habitat altitude and each group type was analyzed statistically. Biodiversity indices, including dominance, diversity, richness, and evenness indices, were calculated. The results showed a total of 4,216 individual benthic macroinvertebrates were collected, including 4 phyla, 6 classes, 16 orders, 40 families, and 100 species. Gammarus sobaegensis was dominant with 0.141% dominance, and the subdominant species was Epeorus nipponicus with 0.088% dominance. The EPT group(Ephemeroptera, Plecoptera and Tricoptera) accounted for 71.00% of the total species and 67.69% of the total individuals. The number of scraper species was highest, and the number of gathering collector individuals was highest among functional feeding groups. The individual number of scrapers(r=-0.358, p < 0.05) and gathering collectors(r=-0.343, p < 0.05) decreased with increasing altitude. The numbers of species and individuals of clingers and sprawlers were highest among the habitat groups. The individual number of clingers(r=-0.547, p < 0.01) and burrowers(r=-0.331, p < 0.05) significantly decreased with increasing altitude. The diversity and richness indices were higher in St. 3 than in the other sites. The dominance index was highest in St. 2, and the evenness index was highest in St. 7. We evaluated the biological water quality with several known methods, and concluded that ESB(Ecological score of benthic macrovertebrates community) and GPI(Group polution index) were more suitable than KSI(Korean saprobic index) and BMI (Benthic macrovertebrate index) to assess the biological water quality of Gayasan mountain stream water.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제26권2호
• /
• pp.278-287
• /
• 2002

The objective of the paper was to calculate the pressure drop and to investigate the recirculation region of the conical orifices used in Kwang-yang Iron & Steel Company. The flow field with water used as a working fluid was the turbulent flow for Reynolds number of 2$\times$10$^4$. The effective parameters fur the pressure drop and the recirculation region were the conical orifice\`s inclined angle ($\theta$) against the wall, the interval(S) between orifices, the relative angle of rotation($\alpha$) of the orifices, the shape of the orifice's hole(circle, rectangle, triangle) having the same area, the number(N) of the orifice's holes having the same mass flow rate, and the thickness(t) of the orifices. It was fecund that the shape of the orifice's hole, the number of the orifice's holes and the thickness of the orifice affected the total pressure drop a lot and that the conical orifice's inclined angle against the wall, the relative angle of rotation of the orifices, the number of the orifice's holes and the thickness of the orifices affected the center location of the recirculation region. The PISO algorithm with FLUENT code was employed to analyze the flow field.

• Journal of People, Plants, and Environment
• /
• 제24권4호
• /
• pp.389-401
• /
• 2021

Background and objective: The purpose of this study is to investigate the ecological status of six areas around Geumgang River that used to be farmlands before they were restored as a riverine ecobelt. This study aims to analyze the correlation between the location environment and ecological status of the sites to identify the environmental factors affecting them. Methods: The sites are classified into four types according to restoration: terraced paddy fields, flat paddy fields, artificial wetland, and landscape forest. The survey items were divided into land use status, plant ecology, and animal ecology. Results: In terms of plant ecology, terraced paddy fields showed favorable naturality with the rate of native species above 90% and the naturalization index below 10%. In terms of animal ecology, the total number of species found in these areas was biggest in terraced paddy fields, followed by flat paddy fields, artificial wetland, and landscape forest. Regarding species diversity, terraced paddy fields also showed abundant species with an average of 1.05 to 1.09. The results of the correlation analysis showed that the forest area around the sites had the most significant effect on species diversity. The grassland and open water area showed a positive correlation with the total number of animal species and the number of dragonflies, confirming that the marshy grassland had a positive effect. As the cultivated land and urbanized area around the sites increased, it had a negative effect on the distribution of native species and the number of animal species that appeared, and a positive effect on the naturalization index. Conclusion: It is necessary to establish preemption and restoration plans for sites such as grasslands adjacent to the forest and terraced paddy fields in order to promote resilience of the diverse species returning to the purchased lands.

• Korean Journal of Construction Engineering and Management
• /
• 제25권4호
• /
• pp.15-23
• /
• 2024

Recently, quality problems, such as the collapse of apartment structures under construction, has emerged as a social issue. Although there are various causes of quality problem and the impact of each problem may be different, the problems from the perspective of construction engineer of construction company are investigated. Therefore, this study aim to investigate the adequacy of construction engineer's experience, number of field engineer, timing of engineer deployment at construction sites, etc. in order to resolve quality and safety problems. In this study, a questionnaire survey was conducted targeting construction managers to obtain objective opinions. The results showed that the number of construction engineers in construction companies should be increased and that intermediate construction engineers should be increased to enable practical site management for resolving quality and safety problems. In addition, it was found that there was a need to reduce the number of non-regular employed field construction engineers in construction site and at the same time systematically regulate the number of on-site construction engineers, similar to safety managers and quality managers.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1529-1534
• /
• 2008

The aim of this study was directed at exploring the possible use of muscle fiber characteristics as new selection traits for improving both porcine lean meat production and quality. A total of 174 (114 Yorkshire, 30 Landrace, and 30 Meishan) pigs were used for this study, and lean meat production ability was estimated by backfat thickness and loin eye area. The Longissimus dorsi muscle was taken in order to measure meat quality and muscle fiber characteristics. Due to the high correlations between total muscle fiber number and most of the performance traits, all pigs were classified into three groups (low, intermediate, or high) by total muscle fiber number using cluster analysis. The high group had the highest loin eye area (p<0.001). The meat quality traits were within normal ranges as reddish pink, firm, and nonexudative (RFN) pork, but the groups classified as intermediate and high had relatively large drip loss percentages (p<0.05), produced more than twice the amount of pale, soft, and exudative (PSE) pork as compared to the low group. The group with a high total muscle fiber number was further classified, based on type 2b fiber percentage, into low or high groups by cluster analysis. The results showed that the low type 2b fiber group had good loin eye area (p<0.05), small drip loss (p<0.05), and did not produce PSE pork. For these reasons, a high total muscle fiber number, with a low percentage of type 2b fibers, may be suitable in selecting for improvements in both lean meat production and meat quality.

• Knowledge Management Research
• /
• 제11권1호
• /
• pp.83-96
• /
• 2010

In this study, the effect of firm's patent competency on the their management performance was analysed. The number of patents granted to Korean firms, patent grade score as of the firm's patent competence were considered in the perspectives of patent volume and patent value respectively. Specially the analysis were implemented focusing on the high performance venture ranked 200th in Korea. The patent source data were from the Korean Intellectual Property Office, Korean Credit Evaluation Information Company, and the Patent Evaluation System of KIPO and KIPA. And the year sales and net profit volume as of the firm's management performance data from the KIS. Management performance data are consisted of the mean sales, net profit and ROI during the 4 years from FY2005 to FY2008. Major results are as follows. The regression model were proved significantly that the year sales volume and net profit are effected by the number of patents and patent grade score. But the model including the ROI were shown not significantly. So it can be concluded that patent volume and patent value are the important factors on firm's financial performance as of the year sales volume and net profit. Also the regression model including the control variables, firm's number of employee and business year, the number of patents and patent grade score are the significant factors on firms performance. And regression coefficients of patent value model were higher than these of patent volume model. So it can be recognized that patent value of firms' patent competency are more important factor than the patent volume.

• The Journal of the Korean life insurance medical association
• /
• 제1권1호
• /
• pp.133-139
• /
• 1984

In the 2,218 healthy cases-male 1,574 female 644-who were conducted serum examination from May 1st 1983 to November 1st 1983 by the medical selection of Dae Han Kyouk life insurance Co., the results which investigated the HBsAg by using the Reverse Passive Hemagglutination(RPHA) method are as follows; 1. The number of 167 from 2,218 cases proved to be positive, showing 7.52%, the number of 143 from 1,574 male positive, showing 9.08%, and the number 24 from 644 female positive, showing 3.73%. The positive rate of the male was indicated by 5.36% higher than that of the female as the former marked 2.4 times higher distribution than the latter. 2) The positive rate by the type of occupations appears as follows; The highest positive rate group is that of discharger from military service in 1983, the number of 70 from 736 persons marking 9.51% and the next is the merchant 8.79%(8/91), employee of a company markes 8.53%(44/516), high school boy 7.69%(19/247), house wife 5.71%(10/210), carrier woman 3.45%(10/290) and the group of the high school girl records the minimum rate of all, 3.13%(4/128). 3. The positive rate by the age group appears as follows; The highest rate group is that of 31 to 35 years, marking 9.80% positive rate, and the next is $26{\sim}30$(9.3%), $21{\sim}25$(8.01%), $41{\sim}45$(6.96%), $36{\sim}40$(6.9%), those below 20(5.99%), 46 to 50 years shows the minimum rate of all(2.94%) Among the male case, 26 to 30 years shows the highest positive rate by 10.59% and female, 31 to 35 years shows the highest rate by 7.89%. 4. The positive rate by the blood type represents as follows; Blood type A shows 7.30%, type B 7.17%, type O 6.11% and type AB indicates 5.88% in order.

• Journal of the Korean Society of Safety
• /
• 제32권4호
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.