• Journal of the Korea Furniture Society
• /
• v.28 no.4
• /
• pp.286-293
• /
• 2017

The dormitory, a common facility for college students, is being deployed and used in terms of both efficient use of space for students and comfortable living. Among them, I was in charge of the rest of the students in the dormitory and investigated and analyzed the dormitory bed which occupied the largest portion of the indoor space. The purpose of this study is to investigate the present condition of bed arrangement and the use condition of the university dormitory in Seoul, and finally to design the bed design which is practical and maximize storage for the students in the dormitory space that accommodates a large number of people, Respectively.

• Journal of Environmental Science International
• /
• v.3 no.3
• /
• pp.263-271
• /
• 1994

A detachment of biofilm was investigated in an inverse fluidized bed biofilm reactor(IFRBR). The biofilm thickness, 5 and the bioparticle density, Pm were decreased by the increase of Reynolds number, Re and the decrease of biomass concentration, h. The correlations were expressed as $\delta$=6l.6+16.33$b_c$-0.004Re and Ppd=0.3+0.027$b_c$- 2.93x$l0^{-5}$ no by multiple linear regression analysis method. Specific substrate removal rate, q was derived by F/M ratio and biofilm thickness as q=0.44.+0.82F/M-5.Ix10$-4^{$\delta$}$. Specific biofilm detachment rate, bds was influenced by FIM ratio and Reynolds number as $b_{ds}$=-0.26+0.26F/M+ 2.17$\times$$10^{-4}$Re. Specific biofilm deachment rate in an IFBBR was higher than that in a FBRR(fluidized bed biofilm reactor) because of the friction between air bubble and the bioparticles.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.325-335
• /
• 1992

In this work, direct contact 4-stage fluidized bed heat exchanger is experimentally studied to develop a new type of heat exchanger which recovers the energy contained in the high temperature waste gas exhausted from the industrial furnaces. A sand is used as a heat transfer medium in this experiment. To determine the optimum operating condition, 11 different perforated plates which have a different free area ratio with different hole diameter are used in the experiment. From the room temperature experiment, the pressure drop which is caused by fluidized bed formation is observed. The high temperature experiment is carried out to seek the optimum operating condition of high heat efficiency at low heat exchanger operation cost. The results of experiment are as following. The pressure drop in the high temperature condition can be predicted from the results of the room temperature experiment. And Nusselt number becomes smaller due to the increased interference between sand particles as Reynolds number increases when the dilute phase fluidized beds are formed in nigh temperature condition. But heat transfer amount through the total sand surface area become larger due to the large resident amount of sand. Considering the heat transfer amount and the heat exchanger operation cost, perforated plates which have either a 30% or 35% of free area ratio with 15mm of hole diameter are best fitted for our goal of this work. The values of .phi. which is a dimensionless number representing the absorption heat amount per unit sand rate are in the range from 0.4 to 0.5, when Reynolds number of waste gas ranges from 25-30 with these perforated plates.

• Journal of The Geomorphological Association of Korea
• /
• v.25 no.2
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• Health Policy and Management
• /
• v.17 no.2
• /
• pp.18-32
• /
• 2007

The purpose of this study was a quantitative analysis for the influence of physician's assistants on national health insurance revenue and number of patients in clinic. The data was derived from the Korean national health insurance. That was complete enumeration. Dependent variables were measured by national health insurance revenue and number of patients. Independent variables were reported physician's assistants that the number of nurse, nurse-aid, technologist of clinical laboratory, physical therapist and radiologist in clinic. Confounding variables were classified by demand(region, number of inhabitants, number of clinics, number of bed per a hundred thousand persons) and supply(sex and age of representative, number of bed, subjective of medical treatment). On the multiple regression analyses, the physician's assistants that nurse, nurse-aid, technologist of clinical laboratory and physical therapist were statistically significant for outputs. But radiologist was statistically significant only for number of patient.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.389-396
• /
• 2012

Objective: The aim of this study is to design an auto showering system regarding bed type for old people or bedridden patients. Background: The rapid growth concerning the aging population leads to an increase in elderly bedridden patients living in senior care centers and hospitals where care givers have difficulty bathing older people with limited mobility. Method: In this study, a showering equipment for experiment was based on anthropometric and researching existing products. The nozzle position was optimized by showering tests and simulations using showering equipment. Results: The problems regarding the existing products were analyzed and the nozzle position was optimized through showering tests. The number, position, and spraying angle of the nozzle were optimized through showering simulations. The automatic showering system concerning bed type was designed by considering their results. Conclusion: When designing an automatic showering system, the most important design element involves determining the position of nozzle and angle of water injection and the number of nozzles. The system was developed by applying the results through user centered-research. Application: The user centered-research for developing products was applied directly in order to develop automatic baths, showering products etc. Furthermore, it was also available to be applied towards senior friendly products.

• Journal of Environmental Science International
• /
• v.22 no.1
• /
• pp.25-35
• /
• 2013

The concentration of organic compounds was analyzed at each step of BAC process though $BDOC_{total/rapid/slow}$. Further, bacteria communities and biomass concentrations measured FISH and ATP methods were analyzed. The bed volume (BV) of steady state is different from that of based on assessment of organic compounds removal. Bed volumes in DOC, $BDOC_{rapid}$ and $BDOC_{total/slow}$ removal at steady state were around 27,500 (185.8 day), 15,000 (101.4 day) and 32,000 (216.2 day), respectively. A biomass didn't change after the bed volume reached 22,500 (152.0 day) according to analyzing ATP concentration of bacteria. The concentration of ATP was 2.14 ${\mu}g/g$ in BV 22,500 (152.0 day). The total bacterial number was $4.01{\pm}0.4{\times}10^7$ cells/g at the bed volume 1,150 (7.8 day) (the initial operation) and the number of bacteria was $9.27{\pm}0.2{\times}10^9$ at the bed volume 58,560 395.7 day) that increased more than 200 times. Bacterial uptrend was reduced and bacterial communities were stabilized since BV 18,720 (126.5 day). When BV were 1,150 (7.8 day), 8,916 (60.2 day), 18,720 (126.5 day), 31,005 (209.5 day), 49,632 (335.3 day), 58,560 (395.7 day), a proportion of total bacteria for the Eubacteria were 60.1%, 66.0%, 78.4%, 82.0%, 81.3% respectively. ${\gamma}$-Proteobacteria group was the most population throughout the entire range. The correlation coefficient ($r^2$) between Eubacteria biomass and ATP concentration was 0.9448.

• Polymer(Korea)
• /
• v.27 no.1
• /
• pp.61-68
• /
• 2003

In this study, we have investigated the preparation of mixed bead and fiber type hybrid ion-exchanger for recovering nickel ion from plating rinse water. There was little dependence of adsorption capacity for nickel ion on the mixing ratio of resin type and fiber type of ion exchangers. However, it increased with increasing the resin content in the mixed bed. It was shown that the data Langmuir and Freundlich's adsorption isotherm model were well fitted to the linear. Affinity between the functional groups in the ion exchanger and nickel ion in the process was confirmed. The pressure drop decreased with increasing the number of stage in the multistage bed, but it increased with increasing the resin content in the mixing bed. The initial breakthrough time in the multistage bed was short due to the increase of number of stage in the continuous process. It was found that the final breakthrough time of the multistage bed was little changed. The breakthrough time decreased with increasing the amount of fibrous ion exchanger in the mixed bed. The maximum adsorption capacities of the mixed and multistage beds were 2.51 meq/g and 2.69 meq/g, respectively. The desorption time for the nickel ion with $1N H_2SO_4$ solution was lower than 10 minutes and the yield of desorption was greater than 98 percent.

• Korea Journal of Hospital Management
• /
• v.4 no.1
• /
• pp.41-65
• /
• 1999

This study was attempted to identify the factors affecting profitability of general hospital in Kyung-In Region. Operating profit to gross revenues and net profit to gross revenues were used as a proxy indicator for profitability of hospitals. The unit of analysis was hospital, and the data were collected 5 years data from 20 hospitals. The major findings are as follows; (1) The average operating profit rate was 1.03% and the net profit rate was -5.00% in twenty hospitals in the Kyung-In Region for the last five years. In terms of maximum surplus, the operating profit rate was 14% and net profit rate was 3.40%. In terms of maximum loss revenue, the operating profit rate was -16.56% and the net profit rate was -22.83%. (2) Since the year 1993, which was the starting year of this study, the operating profits and the net profits consistently decreased. (3) Analyzing the difference in profits among various hospital groups, the tertiary hospital group and the 501-1000 beds group exhibited the highest in operating profit rate. Also, among the higher grade number of beds in hospital group, per 100 beds group, the 41-50 beds group exhibited the highest in operating profit rate. There is a statistically significant difference in those groups(p<0.05, p<0.01). (4) In the health care delivery system, the profit gain in the secondary hospital was 51.5% and in the tertiary hospital was 72.4%. Based on the number of beds in each hospital group, the highest profit gain was 75.0% in the over 1001 beds group, and 71.4% in the 501-1000 beds group. Also, among the higher grade number of beds in hospital group, per 100 beds group, the 41-50 beds group exhibited 88.6% surplus. (5) According to the surplus difference based on the analysis of health care utilization, a group with over 31 patients in bed turnover rate, a group with over 96% in bed occupancy rate and group with over 9% in emergency cases to outpatient visits exhibited the highest profit gains. In addition, a group with over 301 patients in daily outpatient visits per 100 beds and group with 11-12 days average length of stay exhibited the highest profit gains. These results are statistically significant(p<0.05, p<0.01). (6) According to a stepwise regression analysis, the variables measuring the bed turnover rate, number of licensed beds, and number of outpatient visits per specialist explain 34.1% of the variation in operating profits. In terms of net profits, the new outpatient visits, the bed turnover rates and the number of general bed variables explain 30.6%. These results are statistically significant(p<0.01).

• Journal of Korea Water Resources Association
• /
• v.35 no.2
• /
• pp.195-201
• /
• 2002

In this study, an equation is proposed to estimate the limit velocity for lateral stable bed in a curved channel stream. The stable bed on lateral direction is satisfied when there is no more deformation occurs on the transverse bed slope and non-scouring condition in a bend. A theoretical equation for limit velocity is derived using a transverse bed slope model. So, the limit velocity has its theoretical background in the equilibrium of two forces, lateral shear force at the bed due to longitudinal flow and the corresponding lateral bed shear force. To verify the equation, data from four natural river channels were used. There is good agreement between the calculated values using this equation and the measured values. The corrections in equation was found to be correlated with the averaged particle Froude number.