• Structural Engineering and Mechanics
• /
• 제2권2호
• /
• pp.125-139
• /
• 1994

A vector algorithm for calculating the stiffness matrices of reinforced concrete shell elements is presented. The algorithm is based on establishing vector lengths equal to the number of elements. The computational efficiency of the proposed algorithm is assessed on a Cray Y-MP supercomputer. It is shown that the vector algorithm achieves scalar-to-vector speedup of 1.7 to 7.6 on three moderate sized inelastic problems.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2069-2087
• /
• 2023

In nuclear power plant (NPP) accidents, the containment is subject to high temperatures and high internal pressures, which may further trigger serious chain accidents such as core meltdown and hydrogen explosion, resulting in a significantly higher accident level. Therefore, studying the mechanical performance of a containment under high temperature and high internal pressure is relevant to the safety of NPPs. Based on similarity principles, the 1:3.2 scale model of a prestressed concrete containment vessel (PCCV) of a NPP was designed. The loading method, which considers the thermal-pressure coupling conditions, was used. The mechanical response of the PCCV was investigated with a simultaneous increase in internal pressure and temperature, and the failure mechanism of the PCCV under thermal-pressure coupling conditions was revealed.

• 에너지공학
• /
• 제29권1호
• /
• pp.63-74
• /
• 2020

영구정지 후 해체가 계획된 고리 1호기 원자력발전소는 해체 과정에서 다양한 종류의 방사성폐기물이 대량으로 발생할 것으로 예상되고 있다. 이 중 가장 많은 발생량을 차지할 것으로 예상되는 콘크리트 방사성폐기물에 대하여 기존 폐기물의 처분 현황 및 법적 제한사항등을 분석하여 적절하고 효율적인 처분방법을 마련하는 것은 중요한 사안일 것으로 판단된다. 콘크리트 방사성폐기물은 다양한 준위의 폐기물들이며, 이 중 규제해제 준위에 해당되어 자체처분이 가능한 폐기물은 바이오실드 콘크리트이다. 본 논문에서는 방사화 평가 결과를 바탕으로 자체처분이 가능한 폐기물을 자체처분 평가 코드인 RESRAD 코드 프로그램을 이용하여 자체처분 안전성 평가를 수행하였다. 대상 폐기물의 자체처분 시나리오를 선정하고 자체처분시 개인별 피폭선량을 계산하여 국내 원자력안전법에서 규정하는 자체처분 기준 제한치의 만족 여부를 판단하였다. 평가 결과, 전체적으로 상당히 낮은 결과 값을 보이며 기준 제한치를 만족하는 결과를 나타내었다. 이러한 자체처분 안전성 평가 결과를 바탕으로 규제해제 대상으로서 자체처분 가능한 바이오실드 콘크리트 폐기물에 대한 적절한 처분방법을 제시하였다.

• 한국전산구조공학회논문집
• /
• 제26권2호
• /
• pp.157-164
• /
• 2013

본 연구에서는 여객용 항공기 충돌 시 강섬유보강콘크리트를 사용한 철근콘크리트 원전 격납건물의 구조적 거동을 유한요소해석을 이용하여 고찰한다. 항공기 충돌에 의해 원전 격납건물에 가해지는 하중은 Riera 충격하중 시간함수와 충돌 시 접촉면적을 이용하여 모델링하였다. 강섬유보강콘크리트의 재료모델은 CSCM Concrete Model을 사용하였다. 기존에 제안된 강섬유보강콘크리트의 강도예상모델을 이용하여 재료모델의 입력변수를 결정하였다. 강섬유의 함유량에 따른 원전 격납 건물의 항공기 충돌에 대한 구조적 거동을 상용 유한요소 해석 프로그램인 LS-DYNA를 이용하여 해석하였다. 해석결과를 바탕으로 항공기 충돌에 대한 저항성을 평가하였으며, 보수적인 안전성이 요구되는 원전 격납건물에 강섬유보강콘크리트를 적용할 경우 항공기 충돌에 대한 저항성 증대 효과를 기대할 수 있는 것으로 고찰되었다.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(1)
• /
• pp.358-363
• /
• 1995

A study on passive cooling systems for concrete containment of advanced pressurized water reactors has been performed. The proposed passive containment cooling system (PCCS) consist of (1) condenser units located inside containment, (2) a steam condensing pool outside containment at higher elevation, and (3) downcommer/riser piping systems which provide coolant flow paths. During an accident causing high containment pressure and temperature, the steam/air mixture in containment is condensed on the outer surface of condenser tubes transferring the heat to coolant flowing inside tubes. The coolant transfers the heat to the steam condensing pool via natural circulation due to density difference. This PCCS has the following characteristic: (1) applicable to concrete containment system, (2) no limitation in plant capacity expansion, (3) efficient steam condensing mechanism (dropwise or film condensation at the surface of condenser tube), and (4) utilization of a fully passive mechanism. A preliminary conceptual design work has been done based on steady-state assumptions to determine important design parameter including the elevation of components and required heat transfer area of the condenser tube. Assuming a decay power level of 2%, the required heat transfer area for 1,000MWe plant is assessed to be about 2,000 ㎡ (equivalent to 1,600 of 10 m-long, 4-cm-OD tubes) with the relative elevation difference of 38 m between the condenser and steam condensing pool and the riser diameter of 0.62 m.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.42-43
• /
• 2014

Few studies on crew productivity has been conducted, although the data is significant for time and cost estimation. Crew productivity data was collected for over 9 months from a nuclear power plant and analysed in order to identify factors driving the productivity. It was revealed that the crew productivity of form work, rebar work and concrete pouring work was 45.64(㎡/crew·day), 2.93(t/crew·day), 110.25(㎡/crew·day) on average respectively. Moreover, 'nightwork', 'No. of workers per crew' and 'total work amount' were identified as drivers.

• Corrosion Science and Technology
• /
• 제14권1호
• /
• pp.12-18
• /
• 2015

Since the operation period of nuclear power plants has increased, the degradation of buried pipes gradually increases and recently it seems to be one of the emerging issues. Maintenance on buried pipes needs high quality of management system because outer surface of buried pipe contacts the various soils but inner surface reacts with various electrolytes of fluid. In the USA, USNRC and EPRI have tried to manage the degradation of buried pipes. However, there is little knowledge about the inspection procedure, test and manage program in the domestic nuclear power plants. This paper focuses on the development and build-up of real-time monitoring and control system of buried pipes. Pipes to be tested are tape-coated carbon steel pipe for primary component cooling water system, asphalt-coated cast iron pipe for fire protection system, and pre-stressed concrete cylinder pipe for sea water cooling system. A control system for cathodic protection was installed on each test pipe which has been monitored and controlled. For the calculation of protection range and optimization, computer simulation was performed using COMSOL Multiphysics (Altsoft co.).

• Journal of Welding and Joining
• /
• 제31권6호
• /
• pp.1-7
• /
• 2013

In nuclear power plants, lined carbon steel pipes or PCCPs (pre-stressed concrete cylinder pipes) have been widely used for sea water transport systems. However, de-bonding of linings and oxidation of PCCP could make problems in aged NPPs (nuclear power plants). Recently at several NPPs in the United States, the PCCPs or lined carbon steel pipes of the sea water or raw water system have been replaced with HDPE (high density polyethylene) pipes, which have outstanding resistance to oxidation and seismic loading. ASME B&PV Code committee developed Code Case N-755, which describes rules for the construction of buried Safety Class 3 polyethylene pressure piping systems. Although US NRC permitted HDPE materials for Class 3 buried piping, their permission was limited to only 10-year operation because of several concerns including the quality of fusion zone of HDPE. In this study, various requirements for fusion qualification test of HDPE and some regulatory issues raised during HDPE application review in foreign NPPs are introduced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.873-878
• /
• 2000

Tension stiffening effects of reinforced concrete member with large diameter bar, mainly used at reactor building of nuclear power plant, are studied by uniaxial structural tests. Bond length and stress of steel bar, size of steel bar, and compressive strength of concrete are evaluated to tension stiffening by uniaxial tests. Problems and solution during the uniaxial test are suggested. The prevent splitting cracks, concrete cover-to-bar diameter ratio $c/d_{b}$ is kept 2.6~2.8. Because the bond length is increased as the size of steel bar, the specimen length of the D35 steel bar is required at least 2.0 m. The specimen length must be decided with bond length as well as concrete cover-to-bar diameter ratio to prevent splitting crack.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3677-3691
• /
• 2023

Since containment building is the major shielding structure to ensure safety of nuclear power plant, the structural behavior and ultimate pressure capacity of containments must be studied in depth. This paper addresses ambiguous issue of determining free-field position for liner failure by suggesting an expanded free-field region and comparing internal pressure capacities obtained by test data, conservative assumption and suggested free-field region. For this purpose, a practical approach to determine the free-field position for the evaluation of liner tearing is carried out. The maximum principal strain histories versus internal pressure capacities among different free-field positions at various azimuths and elevations are compared with those at the equipment hatch as a conservative assumption. The comparison shows that there are considerable differences in the internal pressure capacity at liner failure within the expanded free-field region compared to the vicinity of the equipment hatch. Additionally, this study proposes an approximate correlation with conservative factors by considering the expanded free-field ranges and material characteristics to determine realistic failure criteria for liner. The applicability of the proposed correlation is demonstrated by comparing the internal pressure capacities of full-scale containment buildings following liner failure criteria according to RG 1.216 and an approximate correlation.