• 한국콘텐츠학회논문지
• /
• 제13권10호
• /
• pp.46-53
• /
• 2013

원전 핵 연료봉에 대한 검사는 고준위 방사능의 위험으로부터 원격에서 이루어져야 하며, 또한 정확하게 이루어져야 한다. 현재 원전 핵 연료봉에 대한 검사는 방사능의 위험으로 인해 카메라로 핵 연료봉을 촬영하여 녹화된 동영상을 원격에서 보고 판단하는 형태로 운영되고 있다. 본 연구는 원자력 발전소에서 사용되는 핵 연료봉에 대한 상태 검사를 영상처리를 통하여 구현한 것이다. 핵 연료봉은 여러 개를 다발로 묶어 사용하도록 되어있는데, 이를 검사하기위한 영상처리 기법으로는 에지 검출 기법이 유용하다. 핵 연료봉 에지 검출을 위해 DoG 기법에 임계값 처리를 추가하는 방법을 제안한다. 이것은 DoG를 최적화한 새로운 기법으로, DoG와 임계값을 듀얼로 처리하는 방법이다. 이 방법으로 핵 연료봉 에지를 검출한 후에, 핵 연료봉 검사 알고리즘을 수행하여 핵 연료봉 이상 유무를 판단한다. 이러한 방법을 통해 미니어처로 제작된 핵 연료봉 검사시스템에 실험한 결과 우수한 특성을 확인하였다. 본 연구를 통해 원전 핵 연료봉 상태 검사를 보다 쉽고 안전하게 시행할 수 있을 것으로 생각된다.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.11-18
• /
• 2022

In this research, curium oxide (CmO₂) is studied as fuel for VVER-1200 reactor to get an attention to its energy value and possibilities. For this purpose, CmO₂ is used in fuel rods or integrated burnable absorber (IBA) rods with and without UO₂ and then compared with the conventional fuel assembly of VVER-1200 reactor. It is burned to 60 GWd/t by using SRAC-2006 code and JENDL-4.0 data library. From these studies, it is found that CmO₂ is competent like UO₂ as a fuel due to higher fission cross-section of ²⁴³Cm and ²⁴⁵Cm isotopes and neutron capture cross-section of ²⁴⁴Cm and ²⁴⁶Cm isotopes. As a result, when some or all of the UO₂ of fuel rods or IBA rods are replaced by CmO₂, we get a similar k-inf like the reference even with lower enrichment UO₂ fuels. These studies show that the use of CmO₂ as IBA rods is more effective than the fuel rods considering the initially loaded amount, power peaking factor (PPF), fuel temperature and void coefficient, and the quality of spent fuel. From a detailed study, 3% CmO₂ with inert material ZrO₂ in IBA rods are recommended for the VVER-1200 reactor assembly from the once through concept.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.21-26
• /
• 1996

Recently several PWR Nuclear Plant experienced fuel rod fretting wear failures due to Flow Induced Vibration. When such multi-span supported fuel assembly has vibration excitation, it is important to know how fretting wears are progress and when the fuel rods are start to failure. In this study, we estimate the amount of wear depth using Archard theory when the fuel rod starts to relative motion against spacer grid dimples.

• Nuclear Engineering and Technology
• /
• 제55권9호
• /
• pp.3260-3267
• /
• 2023

Zr-Nb alloy have been widely used as fuel rods in nuclear power plants. However, from the Fukushima nuclear accident, the weakness of the rod was revealed under harsh conditions, and research on the safety of these types of rods was conducted after the disaster. The method of depositing chromium onto the existing Zr-Nb alloy fuel rods is being considered as a means by which to compensate for the weakness of Zr-Nb alloy rods because chromium is strong against oxidation at high temperatures and has high strength. In order to secure these advantages, it is important to maintain the Cr thickness of the rods and properly inspect the rods before and during their use in power generation. Eddy current testing is a typical means of evaluating the thickness of thin metals and detecting surface defects. Depending on the size and shape of the inspected object, various eddy current sensors can be applied. In particular, because pancake sensors can be manufactured in very small sizes, they can be used for inspections even in narrow spaces, such as a nuclear fuel assembly. In this study, an eddy current technique was developed to confirm the feasibility of Cr coating thickness evaluations. After determining the design parameters of the pancake sensor by means of a FEM simulation, a FPCB pancake sensor was manufactured and the optimal frequency was selected by measuring minute changes in the Cr-coating thickness using the developed sensor.

• Nuclear Engineering and Technology
• /
• 제54권11호
• /
• pp.4030-4048
• /
• 2022

In this study, road transportation tests were conducted with surrogate fuel assemblies under normal conditions of transport to evaluate the vibration and shock load characteristics of spent nuclear fuel (SNF). The overall test data analysis was conducted based on the measured acceleration and strain data obtained from the speed bump, lane-change, deceleration, obstacle avoidance, and circular tests. Furthermore, representative shock response spectrums and power spectral densities of each test mode were acquired. Amplification or attenuation characteristics were investigated according to the load transfer path. The load attenuated significantly as it transferred from the trailer to the cask. By contrast, the load amplified as it transferred from the cask to the surrogate SNF assembly. The fuel loading location on the cask disk assembly did not exhibit a significant influence on the strain measured from the fuel rods. The principal strain was in the vertical direction, and relatively large strain values were obtained in spans with large spacing between spacer grids. The influence of the lateral location of fuel rods was also investigated. The fuel rods located at the side exhibited relatively large strain values than those located at the center. Based on the strain data obtained from the test results, a hypothetical road transportation scenario was established. A fatigue evaluation of the SNF rod was performed based on this scenario. The evaluation results indicate that no fatigue damage occurred on the fuel rods.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1629-1635
• /
• 2017

Reliable prediction of nuclear fuel rod behavior of nuclear power reactors constitutes a basic demand for steady-state calculations, design purposes, and fuel performance assessment. Perfect design of fuel rods as the first barrier against fission product release is very important. Simulation of fuel rod performance with a code or software is one of the fuel rod design steps. In this study, a software program called MARCODE is developed in MATLAB environment that can analyze the temperature distribution, gap conductance value, and fuel and clad displacement in both solid and annular fuel rods. With a comparison of the maximum fuel temperature, fuel average temperature, fuel surface temperature, and gap conductance in solid and annular fuel, the effects of a central hole on the fuel temperature distribution are investigated.

• 비파괴검사학회지
• /
• 제19권2호
• /
• pp.79-84
• /
• 1999

영상처리 방법에 의한 핵연료봉의 제원을 측정하기 위하여 영상처리 소프트웨어를 개발하고 핵연료봉의 직경을 측정하였다. 카메라와 시험체간의 거리, 카메라 위치, 조명세기 및 조명종류와 같은 요소가 핵연료봉 제원 측정에 영향을 미침을 확인하였다. 영상처리 방법에 의한 핵연료봉 직경의 백분율 측정 상대오차는 4.88%이고 백분율 측정 표준편차는 ${\pm}3.34%$였다. 한편 영상처리 방법이 아닌 기존 방법에 의한 백분율 측정 상대오차는 12.77%이고 백분율 측정 표준편차는 ${\pm}9.72%$였으며, 영상처리 방법에 의한 직경 측정 정확도가기존 방법에 의한 결과보다 약 3배정도 향상되었다.

• Journal of Welding and Joining
• /
• 제21권6호
• /
• pp.20-25
• /
• 2003

Various welding methods such as Gas Tungsten Arc Welding(GTAW), magnetic force electrical resistance welding and Laser Beam Welding(LBW) are now available for end cap closure of nuclear fuel rods. Even though the resistance and GTA welding processes are widely used in manufacturing commercial fuel rods, they can not be recommended for the remote seal welding of fuel rods in the hot cell Facility due to the complexity of the electrode alignment, the difficulty in replacing parts in a remote manner and the large heat input for the thin sheath. Therefore, the Nd:YAG laser system using optical fiber transmission was selected for the end cap welding of irradiation fuel rods in the hot cell. The remote laser welding apparatus in the hot cell Facility was developed using a pulsed Nd:YAG laser of 500 watt average power with an optical fiber transmission. The weldment quality such as microstructure and mechanical strength was satisfactory. The optimum conditions of laser welding for encapsulating irradiation fuel rods in the hot cell were obtained.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1099-1109
• /
• 2020

The performance of gadolinium burnable absorber (GdBA) for reactivity control in UO₂ and (U, Th)O₂ fuels and its impact on spent fuel characteristics was performed. Five fuel assemblies: one without GdBA fuel rod and four each containing 16, 24, 34 and 44 GdBA fuel rods in both fuels were investigated. Reactivity swing in all the FAs with GdBA rods in UO₂ fuel was higher than their counterparts with similar GdBA fuel rods in (U, Th)O₂ fuel. The excess reactivity in all FAs with (U, Th)O₂ fuel was higher than UO₂ fuel. At the end of single discharge burn-up (~ 49.64 GWd/tHM), the excess reactivity of (U, Th) O₂ fuel remained positive (16,000 pcm) while UO₂ fuel shows a negative value (-6,000 pcm), which suggest a longer discharge burn-up in (U, Th)O₂ fuel. The concentration of plutonium isotopes and minor actinides were significantly higher in UO₂ fuel than in (U, Th)O₂ fuel except for ²³⁶Np. However, the concentration of non-actinides (gadolinium and iodine isotopes) except for ¹³⁵Xe were respectively smaller in (U, Th)O₂ fuel than in UO₂ fuel but may be two times higher in (U, Th)O₂ fuel due to its potential longer discharge burn-up.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1333-1344
• /
• 2019

An integrated approach of model simplification for high burnup spent nuclear fuel is proposed based on material calibration using optimization. The spent fuel rods are simplified into a beam with a homogenous isotropic material. The proposed approach of model simplification is applied to fuel rods with two kinds of interfacial configurations between the fuel pellets and cladding. The differences among the generated models and the effects of interfacial bonding efficiency are discussed. The strategy of model simplification adopted in this work is to force the simplified beam model of spent fuel rods to possess the same compliance and failure characteristics under critical loads as those that result in the failure of detailed fuel rod models. It is envisioned that the simplified model would enable the assessment of fuel rod failure through an assembly-level analysis, without resorting to a refined model for an individual fuel rod. The effective material properties of the simplified beam model were successfully identified using the integrated optimization process. The feasibility of using the developed simplified beam models in dynamic impact simulations for a horizontal drop condition is examined, and discussions are provided.