• 한국항공우주학회지
• /
• 제45권10호
• /
• pp.844-854
• /
• 2017

E-D 노즐은 고도에 따라 노즐 내의 유효 면적을 변화시켜 고도 보정 효과를 통해 성능 이득을 가지는 노즐이다. E-D 노즐은 노즐의 길이를 절감시켜 발사체의 탑재중량이득을 얻을 수 있다고 알려져 있는데, 이러한 E-D 노즐의 장점과 잠재적인 가능성 때문에 영국, 독일, 호주, 유럽 등에서 관련된 연구가 수행되었다. 영국의 경우 E-D 노즐의 유동 특성과 고도 보정 노즐 중 듀얼 벨 노즐과의 성능 비교 연구를 수행하였고, DLR에서는 E-D 노즐의 천이 특성을 파악하기 위해 노즐 압력비 변화에 따른 천이 특성을 중점적으로 분석하였다. 유럽에서는 실제 발사체 Ariane 5 ESC-B 상단에 E-D 노즐 개념을 적용한 수치적 연구를 수행하여 노즐 길이 절감에 따른 탑재중량이득 가능성을 확인하였다. 본 논문에서는 국외에서 수행한 E-D 노즐의 연구 동향을 특징 별로 분류 및 분석하였고, 향후 E-D 노즐 연구의 기초 자료로 활용하고자 한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
• /
• pp.199-200
• /
• 2012

An experimental study on geometric optimization was conducted to develop a hybrid/dual swirl jet combustor for a micro-gas turbine. A hybrid concept indicating a combination of swirling jet partially premixed and premixed flames were adopted to achieve high flame stability as well as clean combustion. Location of pilot nozzle, angle and direction of swirl vane were varied as main parameters with a constant fuel flow rate for each nozzle. The results showed that the variation in location of pilot nozzle resulted in significant change in swirl intensity due to the change in flow area near burner exit, and thus, optimized nozzle location was determined on the basis of CO and NOx emissions under conditions of co-swirl flow and swirl $angle=30^{\circ}$. The increase in swirl angle (from $30^{\circ}$ to $45^{\circ}$) enhanced the emission performances, in particular, with a significant reduction of CO emission near lean-flammability limit. It was observed that the CO emission near lean-flammability limit was further reduced through the counter-swirl flow. However, there was not significant change in the NOx emission in the operating conditions (i.e. equivalence ratio of 0.6~0.7) between the co- and the counter-swirl flow.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.520-524
• /
• 2000

A ejector system is one of the fluid machinery, which has been mainly used as an exhaust pump or a vacuum pump. The ejector system has often been pointed out to have only a limited efficiency because it is driven by pure shear action and the mixing action between primary and secondary streams. In the present work, numerical simulations were conducted to investigate the effects of the geometry and the mass flow ratio of supersonic ejector-diffuser systems on their mixing performance. A fully implicit finite volume scheme was applied to solve the axisymmetric Navier-Stokes equations, and the standard ${\kappa}-{\varepsilon}$ turbulence model was used to close the governing equations. The flow fields of the supersonic ejector-diffuser systems were investigated by changing the ejector throat area ratio and the mass flow ratio. The existence of the second throat strongly affected the shock wave structure inside the mixing tube as well as the spreading of the under-expanded jet discharging from the primary nozzle, and served to enhance the mixing performance.

• 한국추진공학회지
• /
• 제26권6호
• /
• pp.62-73
• /
• 2022

본 연구에서는 환형연소기 형태를 가지는 가스터빈 연소기에서 연소불안정성을 제어하는 방법을 제시하고자 하였으며, 노즐 배치와 이에 따른 당량비 변화를 통한 유동적인 대칭성파괴(Flow symmetry breaking) 효과를 비교하였다. 이를 위하여 FFT, Time signal 및 위상궤적의 모드 분석을 통하여 대칭성파괴 효과를 확인하였다. 또한, 모드분석으로 불안정한 영역과 안정된 영역을 확인하였고 이를 등고선 지도에 나타내었다. 본 연구를 통해 노즐의 당량비와 배치가 대칭이거나 노즐이 연속적으로 배치되면 불안정성이 발생하였으나, 노즐의 배치 및 당량비가 대칭성을 가지질 않는다면 당량비의 차이가 작더라도 연소불안정성이 극적으로 감소하는 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.739-742
• /
• 2002

The supersonic, dual, coaxial jet impinging upon a vertical flat plate has recently been applied to a variety of industrial manufacturing processes, since it has several advantages over a conventional supersonic impinging jet. In the present study, experimentation is carried out to investigate the effects of the impinging angle of the annular flow and the design Mach number on the flow field formed over the vertical flat plate. A convergent-divergent nozzle is used to obtain the inner jet flow, its design Mach number being changed between $1.0\;and\;2.0$. The outer annular nozzle has a constant area of the Mach number of 1.0, and its impinging angle of $0^{\circ}\;and\;20^{\circ}$. The primary jet pressure ratio is changed in the range from 6.0 to 10.0 and for the annular flow, the assistant jet pressure ratio is changed from 1.0 to 4.0. The distance between the dual, coaxial nozzle and flat plate is also changed. Detailed pressure measurements are conducted along the axis of the jet and on the flat plate as well. The impinging coaxial Jet flows are visualized using the Schlieren and Shadow optical methods. The results show that the flow field on the plate is not strongly dependent only on the primary and assistant pressure ratios but also the impinging angle of the annular nozzle.

• 한국추진공학회지
• /
• 제19권2호
• /
• pp.1-8
• /
• 2015

이중펄스 로켓 추진기관은 하나의 펄스분리장치에 의해 분리된 2개의 추진제 그레인을 가진 변형된 고체 추진기관이다. 이러한 추진기관의 주요 성능은 펄스분리장치 홀 면적대 노즐 목 면적비의 변화에 영향을 받는다. 본 연구에서는 펄스분리장치 홀 면적대 노즐 목 면적비 변화에 따른 내부유동특성을 고찰하기 위해 유동해석을 수행하였다. 유동해석에 사용된 기체로는 hot gas로 HTPB/AP계 복합추진제 연소가스와 cold gas로 질소가스롤 사용하였다. 이중펄스 로켓 추진기관의 내부유동해석 결과는 공압실험 결과와 비교 분석을 통해 검증하였다. 본 논문에서는 상용 CFD(Computational Fluid Dynamics) 코드인 ANSYS FLUENT V14.5를 이용하여 유동을 모사하였다.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.24-31
• /
• 2002

축 대칭 원형노즐 출구에 삼각형 형태의 작은 탭이나 얇은 테이프가 부착되었을 때 나타나는 초음속 제트유동장의 변화에 관한 연구가 쉴리렌 영상과 피토압력 측정을 통하여 수행되었다. 노즐 출구면적의 1 %에 해당하는 작은 탭에서 나타나는 유동방향 와류에 의한 제트유동 변화는 유동이 과소팽창 될 때 완전팽창과 과대팽창의 경우에 비하여 더 크게 나타나며 이로 인한 유동유입이 더 크게 나타남을 알 수 있었다. 탭의 설치각도 변화에 의한 영향도 평가되었으며, 유동이 과대팽창 될 때 노즐 안으로 구부러진 탭의 설치가 충격파의 간섭강도를 약화시키고 이로 인한 마하디스크의 소멸현상을 관찰할 수 있었다. 아울러 노즐내부 낮은 높이의 돌출부가 후방 유동장의 원주방향으로 압력변화를 나타내고, 이러한 압력변화는 유동의 팽창 정도에 영향을 받음을 알 수 있었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2003년도 제20회 춘계학술대회 논문집
• /
• pp.49-53
• /
• 2003

In this study, the geometric design parameters of ejector system were investigated. The critical parameters were primary nozzle area ratio, 2nd-throat cross sectional area and 2nd-throat L/D ratio. At every geometry cases, primary pressure and secondary pressure were measured simultaneously according to secondary mass flow rate. From the results, the ejector starting pressure, unstarting pressure and minimum secondary flow pressure were found and we got the effect of geometric parameters to ejector performance and the way to optimal design of ejector system for chemical lasers operating. Also the experiments of changing secondary flow temperature were carried out.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.54-60
• /
• 2003

Compound choking frequently occurs at a minimum area of the flow passage, where two or more streams which have different stagnation properties are merged. This phenomenon is especially important in that the flow choking may not be given by Mach number, M=1 at the nozzle throat. In order to obtain a detailed understanding of the flow characteristics involved in the compound flow choking, the two-dimensional, compressible, Wavier-Stokes equations are solved using a fully implicit finite volume method and the predicted solutions are compared with the results of the one-dimensional theoretical analysis. Stagnation pressure and temperature of each stream are changed to investigate the effects on the compound choking. The results show that stagnation pressures of each stream affect Mach number and static pressure distributions downstream of the exit of the convergent nozzle. However, the flow characteristics of the compound choking are not significantly dependent on the total temperature ratio.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.124-131
• /
• 2003

When a secondary gaseous flow is injected vertically into a supersonic flow through circular nozzle, a complicated structure of flow field is produced around the injection area. The interaction between the two streams produces a strong bow shock wane on the upstream side of the side-jet. The results show that bow shock wave and turbulent boundary layer interaction induces the boundary layer separation in front of the side-jet. This study is to analyze the structure of flow fields and distribution of surface pressure on the flat plate according to total pressure ratio using a supersonic cold-flow system and also to study the control force of affected side-jet. The nozzle of main flow was designed to have Mach 2.88 at the exit. The injector has a sonic nozzle with 4mm diameter at the exit of the side-jet. In experiments, The oil flow visualization using a silicone oil and ink was conducted in order to analyze the structure of flow fields around the side-jet. The flow fields are visualized using the schlieren method. In this study, a computational fluid dynamic solution is also compared with experimental results.