• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.100-105
• /
• 2005

In this paper, a small supersonic wind tunnel is designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The flow is visualized by means of a single pass Schlieren system. The supersonic cascade with 2-dimensional supersonic nozzle is tested for various gaps between the nozzle and cascade. By the experiment, the flow is visualized and static pressure of the cascade was measured. And highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions, flow characteristics of the supersonic turbine are observed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.1
• /
• pp.18-25
• /
• 2001

The results of systematic numerical experiments of secondary gas injection thrust vector control are presented. The effects of secondary injection system such as injection location and nozzle divergent cone angle onto the overall performance parameters such as thrust ratio, specific impulse ratio and axial thrust augmentation, are investigated. Complex nozzle exhaust flows induced by the secondary jet penetration is numerically analyzed by solving unsteady three-dimensional Reynolds-averaged Navier-Stokes equations with Baldwin-Lomax turbulence model for closure. Numerical simulations compared with the experiments of secondary air injection into the rocket nozzle of $9.6^{\cire}$ divergent half angle showed good agreement. The results obtained in terms of overall performance parameters showed that locating the secondary injection orifice further downstream of primary nozzle ensures the prevention of occurrence of reflected shock wave, therefore is suitable for efficient and stable thrust vectoring over a wide range of use.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.201-213
• /
• 1989

This study is just to be carried out to grasp the efficiency of jet stream excavating for the ground. Changing the dynamic pressure, nozzle diameter, distance off the ground, we measured the impulse, the excavated depth, the excavated width. According as each dynamic pressure increases from 100 to $500gf/cm^2$, the impulse of the jet stream increases from 43 to 114gf, from 52 to 227gf, from 114 to 506gf, from 137 to 768gf, in 4, 6, 8, 10mm nozzles respectively, but it makes no difference in the value of distance within 50cm off ground. The excavated depth increases at the invariable rate in accordance with nozzle diameter, dynamic pressure, nozzle distance. We obtain the equations relevant to the ground I, II as follows: $$L_I=[0.01(H/r-100) -0.43\cdot\iota+11.78]{\cdot}D/4$$ $$L_{II}=[0.03(H/r-100) -0.34\cdot\iota+6.39]{\cdot}D/4$$ where, $L_I,\;L_{II}$ are respectively the excavated depths of the ground I, II, cm; H is the dynamic pressure, $gf/cm^2\;:\;\iota$ is the distance off the ground, cm; D is Nozzle diameter, mm; r is the specific weight, $1gf/cm^2$.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.128-133
• /
• 2005

In this study, performance design programs for components of a turbopump unit (TPU) in a Liquid Rocket Engine (LRE), that has non-cryogenic centrifugal pumps and 1-stage impulse turbine with partial admission nozzle, were developed. The programs were integrated in a TPU module by balancing the mass flow rate for pump-turbine power, and the module was inserted into the LRE system conceptual design program. The fundamental design conditions, satisfying LRE system requirements and minimum mass flow rate condition of gasgenerator, were found and compared with data from a Russian liquid rocket engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.3
• /
• pp.29-38
• /
• 2015

In this study, 3-dimensional URANS simulation was performed to analyze the effect of the nozzle-rotor axial gap spacing of a supersonic impulse turbine on turbine performance. The computations were conducted for four different axial gap cases corresponding to about 6%, 10%, 20% and 30% of the blade height, respectively. The results show a good agreement with previous studies and the turbine efficiency decreases drastically in certain range. It is examined that the turbine performance characteristics could change depending on the influence of leading edge shock to the nozzle outlet. It is also found that the entropy rise distributions along the span differ from each other.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.2
• /
• pp.25-33
• /
• 2012

A genetic algorithm (GA) has been employed to optimize the major design variables of the liquid rocket engine. Pressure of the main combustion chamber, nozzle expansion ratio and O/F ratio have been selected as design variables. The target engine has the open gas generator cycle using the LO2/RP-1 propellant. The gas properties of the combustion chamber have been obtained from CEA2 and the mass has been estimated using reference data. The objective function has been set as multi-objective function with the specific impulse and thrust to weight ratio using the weight method. The result shows about 4% improvement of the specific impulse and 23% increase of the thrust to weight ratio. The Pareto frontier line has been also obtained for various thrust requirements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.127-134
• /
• 2011

A genetic algorithm (GA) has been employed to optimize the major design variables of the liquid rocket engine. Pressure of the main combustion chamber, nozzle expansion ratio and O/F ratio have been selected as design variables. The target engine has the open gas generator cycle using the LO2/RP-1 propellant. The gas properties of the combustion chamber have been obtained from CEA2 and the mass has been estimated using reference data. The objective function has been set as multi-objective function with the specific impulse and thrust to weight ratio using the weight method. The result shows about 4% improvement of the specific impulse and 23% increase of the thrust to weight ratio. The Pareto frontier line has been also obtained for various thrust requirements.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.125-129
• /
• 2009

The basic design of liquid rocket engine combustion chamber for a large space launch vehicle was described. It has vacuum thrust of 74.8 ton, vacuum specific impulse of 306.9 sec, chamber pressure of 60 bar, mass flow rate of 243.6 kg/s and combustion characteristic velocity of 1730 m/sec. The details of combustion performance and geometrical parameter were also given. The 75 ton combustion chamber consists of the combustor head with injector and the chamber/nozzle with regenerative cooling channels.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.3
• /
• pp.49-59
• /
• 2008

In this study, the design method of a 155 mm Solid Fuel Ramjet projectile is proposed and a flight performance analysis program through mathematical modelling is developed. Through flight performance analysis, ramjet performance during flight, which is comprised of thrust, specific impulse, pressure recovery ratio, location of shock waves, and magnitude of drag, was predicted. The results show that compared to Rocket Assisted Projectile(RAP), the range was increased by 90 %. Furthermore, how variations in nozzle exit area ratio and the intake area cause variations in range was observed. This research on modeling and simulation methodology will provide useful data for future development of solid fuel ramjet projectiles.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.136-142
• /
• 2007

A small supersonic wind tunnel was designed and built to study the flow characteristics of a supersonic impulse turbine cascade. The supersonic cascade with a 2-dimensional supersonic nozzle was tested for the axial gap ratio (${\delta}$) of the supersonic turbine that is the one of the turbine design parameter. Firstly, the flow was visualized by a single pass Schlieren system. Next, total and static pressure of the cascade were measured by a pressure scanning system. Highly complicated flow patterns including shocks, nozzle-cascade interaction and shock boundary layer interactions, flow characteristics of the supersonic turbine were observed.