• 제목/요약/키워드: Nox4

검색결과 725건 처리시간 0.034초

Euro 5 경유 대형트럭의 유해대기오염물질 배출특성 (Emission Characteristics of Hazardous Air Pollutants from Diesel Heavy duty Trucks for Euro 5)

  • 홍희경;문선희;서석준;김정화;정성운;정택호;홍유덕;성기재;김선문
    • 한국분무공학회지
    • /
    • 제23권2호
    • /
    • pp.74-80
    • /
    • 2018
  • Emission characteristics of regulated pollutants (CO, NOx, HC and PM) and hazardous air pollutants (HAPs) from diesel heavy duty trucks equipped with EGR+pDPF and SCR for Euro 5 emission standards were investigated using a chassis dynamometer. In the case of regulated pollutants, diesel heavy duty trucks with EGR+pDPF emitted 79% less CO than those with SCR. Also, those with the SCR emitted 36% less NOx than those with the EGR+pDPF. The results of VOCs have show that alkanes emissions for heavy duty trucks with the EGR+pDPF and the SCR have been higher than alkenes, cycloalkanes and aromatics. In the case of individual VOCs, the highest of propene emissions for 11.3~16.1% occupied. For aromatics group, benzene emissions are the highest percentage for 4.4~15.5%. In the future, the results of present study will provide basic data to set up HAPs emissions inventory for mobile source.

메탈화이버 버너에서 매트 두께와 연료 종류에 따른 복사 효율 및 연소 특성에 관한 실험적 연구 (Experimental Study on the Radiation Efficiency and Combustion Characteristics with Respective to the Mat Thickness and the Fuel Kinds in Metal-Fiber Burner)

  • 김재현;이기만
    • 한국수소및신에너지학회논문집
    • /
    • 제29권5호
    • /
    • pp.512-522
    • /
    • 2018
  • This study was conducted to investigate on the combustion characteristic with the effects of mat thickness and fuel kinds in a metal-fiber burner. The mode transition point is confirmed by the K value, which was defined as the rate of flow velocity and laminar burning velocity. The ($T^4_{sur}-T^4_{\infty}$) is highest at methane flame with 3 T thickness. Through the measurement of the unburned mixture temperature, the possibility of submerged flame in surface combustion burner was confirmed. The rapid emission of CO occurs nearby limit blow out (LBO) because of the increase of flow velocity. In case of NOx, the trend is similar with surface temperature. However, it also considered that the NOx emission is affected by residence time with flame position.

선대 평판형 반응기에서 $NO_2$ 생성에 미치는 $O_2$의 영향 (The influence of $O_2$ concentration on the generation of $NO_2$ by using the wire-plate reactor)

  • 박재윤;김성진;김종달;이선재;하상태;한상보;이동훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.2050-2052
    • /
    • 2000
  • In this paper, the effect of $O_2$ concentration on NO removal and $NO_2$ generation by corona discharge from simulated flue gas was measured and estimated for the wire-plate reactor. $NO_2$ removal rate was 0$\sim$30[%] under about 3.4[%] of oxygen concentration, however, it was difficult to remove NOx over 3.4[%] of oxygen concentration. It may be due to generate $NO_2$ from $N_2$ and $O_2$ molecules and converse NO to $NO_2$ by 0 and $O_3$. Magnetic field applied to electric field in plasma was very effective for NOx removal under 2[%] of $O_2$ concentration.

  • PDF

마이크로파가 인가된 화염에서의 화염안정성 및 오염물질 배출특성 (Characteristics of the Microwave Induced Flames on the Stability and Pollutant Emissions)

  • 전영훈;이의주
    • 한국안전학회지
    • /
    • 제29권4호
    • /
    • pp.23-27
    • /
    • 2014
  • The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

연속순환 생물막 공정을 이용한 돈사 폐수 처리 (Swine Wastewater Treatment Using Continuos Circulation Biofilm Process)

  • 고병대;라창식
    • Journal of Animal Science and Technology
    • /
    • 제49권2호
    • /
    • pp.279-286
    • /
    • 2007
  • 반응물을 연속적으로 내부 순환시키는 생물막 연속회분식모래여과 공정을 고안하고 외부 탄소원이 전혀 사용되지 않는 조건하에서의 돈사폐수 처리특성을 평가하였다. 수직형과 경사형 모래여과조에서의 NOx-N 부하량에 따른 탈질율은 각각 19%와 3.8%로 수직형에서 5배 정도 높은 효율을 보임에 따라 수직형태의 모래여과조를 생물막 연속회분식 공정과 연계하여 운전하였다. 처리공정을 HRT 15일, 내부순환율 105L/hr.m3, 평균 암모니아성 질소 부하량 54g/m3.d 조건에서 운전하였을 때 STOC, NH4- N, TN의 처리효율은 각각 75%, 97%, 85%이었다. 생물막 연속회분식 반응조와 모래여과조간의 내부순환으로 TN의 제거효율이 약 14%증진되는 것으로 나타났으며 얻어진 질소제거효율 증진은 주로 모래여과조에서의 탈질에 의한 것으로 밝혀졌다. 또한 용해성 인의 경우 내부순환이 수행되지 않았을 시에는 유출수내 농도가 오히려 증가하였으나 내부순환시에는 약 57% 정도가 제거되는 것으로 나타남에 따라 반응물의 내부순환이 용해성 인의 제거효율 증진에도 기여함을 알 수 있었다. 시스템에서의 질소제거 양상을 분석해본 결과 최종 유출수내의 NH4-N은 부하량 60g/m3.d 수준에서 약 20mg/L 이하로 비교적 일정하였고 부하량이 100g/m3.d. 이상의 수준으로 상승함에도 80% 이상의 질소 제거효율을 보였다. 그러나 부하량 100g/m3.d 수준 이상에서부터 처리효율이 감소하는 것으로 나타나 외부탄소원이 전혀 사용되지 않는 운전조건에서의 질소의 적정 부하량은 약 100g/m3.d 정도인 것으로 판단되었다.

DME를 연료로 하는 커먼레일 디젤 엔진의 연소와 배기 특성에 미치는 분사압력과 EGR의 영향 (Effects of the EGR and Injection Pressure on the Combustion and Emission Characteristics of DME Commonrail Diesel Engine)

  • 정재우;강정호;이성만;김현철;강우
    • 한국자동차공학회논문집
    • /
    • 제14권4호
    • /
    • pp.84-91
    • /
    • 2006
  • In this study, the effect of EGR and fuel injection pressure on the characteristics of combustion and emission performance of the common-rail diesel engine is investigated using DME fuel as a smoke-free alternative fuel. Because the heating value and density of DME fuel are lower than those of diesel fuel, the injection duration of the DME engine is relatively longer than the injection duration of the diesel engine with the same injection pressure. However, the higher injection pressure can shorten the injection duration for the DME engine. Although the smoke level of the DME engine is much lower than that of the diesel engine, the NOx is at a level similar to that of the diesel engine. As a proposed solution for this, the EGR technique is empirically applied to the DME engine. In the experiments, the injection pressure was changed from 200bar to 400bar, and the EGR rate was limited under 40%. With the same injection timing and fuel amount, the experiment results indicated that the increase of injection pressure led to the increase of IMEP while decreasing HC and CO emissions. However, the NOx emission tends to increase as the injection pressure becomes higher. On the other hand, as the EGR rate was increased, NOx emission and A/F were reduced while the HC and CO emissions were increased. Because HC and CO emissions have the critical A/F point where the emissions of HC and CO are rapidly increased, it is proposed that the EGR rate must be limited under the critical EGR rate.

Syngas-순산소 확산화염의 연소특성에 관한 실험적 연구 (Experimental Study on the Combustion Characteristics of Syngas-Oxyfuel Diffusion Flames)

  • 이상민;최원석;안국영
    • 한국수소및신에너지학회논문집
    • /
    • 제21권6호
    • /
    • pp.553-560
    • /
    • 2010
  • The characteristics of syngas-oxyfuel combustion has been investigated experimentally in the present study. Experimental measurements were conducted to aid a fundamental design of a syngas-oxyfuel combustor with a double coaxial burner configuration. To examine the effects of different syngas fuels on combustion characteristics, various fuel types are utilized such as commercial coal gases (Texaco, Shell), COG (cokes oven gas), and $CH_4$ as a main component of natural gas. $CO_2$ was added to the four fuel types as a diluent gas to reduce the flame temperature. The flame images and emission characteristics of NOx and CO were examined for various equivalence ratio and $CO_2$ dilution ratio. The results show that CO emission was rapidly increased as equivalence ratio approached the stoichiometry condition by reducing the amount of oxygen. As the $CO_2$ dilution increased, CO emission increased while NOx emission decreased due to reduced flame temperature. When the syngas-oxyfuel combustor is operated with 20~40% of $CO_2$ dilution ratio, the CO and NOx emission levels were kept below 50 ppm and 25 ppm, respectively, with a high concentration of $CO_2$ over 95 vol.% in exhaust gases.

천연가스 선회 예혼합 화염의 NOx 생성 및 배출 특성 (NOx Formation and Emission Characteristics of Premixed Swirl Flame of Natural Gas)

  • 유현석;이중성;한정옥
    • 대한기계학회논문집B
    • /
    • 제23권6호
    • /
    • pp.788-794
    • /
    • 1999
  • The swirl flame is mostly used to stabilize the flame on the burner nozzle in the industrial combustor. In the case of the weak swirl flame(S<0.4), the recirculation zone could not be formed, but in the strong swirl(S>0.6) flame, it could be formed in the center of the swirl flame. In this study, the measurement and analysis of emission species, temperature, radicals of premixed swirl flame in the combustor were performed to understand the NO formation and emission characteristics of the swirl flame of natural gas. The result of NO emission in the swirl flame is that the amount of NO emission in the strong swirl flame decreased about 60% compared with that of the weak swirl flame. The main region of NO formation of the weak swirl flame is positioned in the down stream(z=100~200mm) of the flame, but that of the strong swirl flame is positioned in the up stream(z=40mm) where the recirculation zone seems to be formed. It is supposed that the increase of flame surface and the formation of inversed flame cause the reduction of the high temperature region on the production of NO in the strong swirl flame. The result of NO-temperature relation revealed that the factor of NO formation is not only temperature but also another parameters in the weak swirl flame, but in the strong swirl flame, NO is proportional to the temperature of higher than 1200K.

천연망간광석 SCR 반응에서 수분의 영향 (The effect of moisture on SCR reaction of NMO (Natural Manganese Ore))

  • 김성수;홍성창
    • 공업화학
    • /
    • 제18권4호
    • /
    • pp.350-355
    • /
    • 2007
  • 천연망간광석을 이용한 질소산화물의 선택적촉매환원 반응에서 배가스 내에 포함된 수분의 영향을 연구하였다. 실험은 천연망간광석 촉매상에서 NO와 $NH_3$의 반응을 독립 또는 동시에 반응시켰다. 천연망간광석 촉매의 격자산소를 통하여 저온에서 $NH_3$가 산화될 수 있으며, $NH_3$의 산화로 인하여 생긴 NO 및 $NO_2$의 농도는 수분이 없을 때보다 수분이 존재할 때에 $300^{\circ}C$ 이상 고온에서 더 높게 나타났다. 수분은 천연망간광석 촉매상에서 NO 및 $NH_3$와 경쟁흡착하며, 이것은 고온 및 저온에서의 선택적촉매환원 반응을 저해하는 요인으로 작용할 수 있다. 촉매제조시 dipping한 수분도 $NH_3$와 경쟁흡착을 하여 $250^{\circ}C$ 이하에서 NOx 전환율이 감소하였다. NMO는 소성온도별로 활성특성이 달라지고 수분의 유무에 관계없이 $400^{\circ}C$의 최적소성온도를 갖는다.

디메틸에테르 연료를 사용하는 3.3리터 디젤기관의 배기성능 개선 (Improvement of Emission Performance in a 3.3 Liter DI Diesel Engine by Using Dimethyl Ether Fuel)

  • 표영덕;이영재;김문헌
    • 한국자동차공학회논문집
    • /
    • 제15권4호
    • /
    • pp.178-185
    • /
    • 2007
  • A study is improvement of power and emission in a inline-pump Dr diesel engine by using Dimethyl ether Fuel. Dimethyl ether (DME) is an oxygenated fuel with a cetane number higher than that of diesel oil. It meets the ULEV emission regulation and reduces the smoke to almost zero when used in a diesel engine. But NOx emission is almost same and CO, THC emissions are lower than that of diesel engine. The emissions aren't satisfied the stronger emission regulation in the further. Generally DOC (Diesel Oxidation Catalyst) is used to reduce CO & THC emissions and EGR (Exhaust Gas Recirculation) system is used to reduce NOx emission. Test results showed that the torque and the power with DME were almost same as those of pure diesel oil, but the brake thermal efficiency increased a little. also the BSEC (Brake Specific Energy Consumption) with DME was similar that of diesel. The test results showed that the DOC was the vary effective method to reduce the CO emission in case of Dimethyl Ether Fuel in diesel engine. But, THC emission is showed a little reduction rates. Also EGR system was the very effective method to reduce the NOx emission in case of Dimethyl Ether Fuel in diesel engine.