• 한국기계연구소 소보
• /
• 통권15호
• /
• pp.75-87
• /
• 1985

A review was performed on fatigue life prediction and strength evaluation of shot peened parts. Fatigue strength of machine parts can be improved by shot peening due to compressive residual stresses on such parts. Compressive residual stress cannot be uniquely define by peening intensity. Several measuring methods of residual stress and the principle of hole drilling method are presented. Exploratory measurement of residual stress was performed on the shot peened SM35C plate with the hole drilling method. Fatigue life and failure location of shot peened parts under bending load can be predicted by a damage parameter which is incorporated with material properties, residual stress, and applied stress conditions. Some method are presented to predict the fatigue strength of shot peened parts at any given life. Shot peening gives its full benefit to the notched machine parts of high strength steels.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.165-169
• /
• 1996

In this study residual stress in weldment was considered about the effect on the fatigue propagation and about the effect of redistribution of residual stress. Then, fatigue tests were conducted by the center notched specimens machined with welded plate. The residual stress and its redistribution after the crack growth were measured by the magnetizing stress indicator and hole-drilling method. Fatigue crack propagation was estimated by the specimens having residual stress redistributed after the cracks growth and having the effects of crack closure. Crack growth rates were predicted and compared with experimental results. It had been found that the predicted crack propagation rates have a good agreement with experimental results when the redistribution of residual stress was considerd.

• 한국재료학회지
• /
• 제33권7호
• /
• pp.302-308
• /
• 2023

The influence of specimen geometry and notch on the hydrogen embrittlement of an SA372 steel for pressure vessels was investigated in this study. A slow strain-rate tensile (SSRT) test after the electrochemical hydrogen charging method was conducted on four types of tensile specimens with different directions, shapes (plate, round), and notches. The plate-type specimen showed a significant decrease in hydrogen embrittlement resistance owing to its large surface-to-volume ratio, compared to the round-type specimen. It is well established that most of the hydrogen distributes over the specimen surface when it is electrochemically charged. For the round-type specimens, the notched specimen showed increased hydrogen susceptibility compared with the unnotched one. A notch causes stress concentration and thus generates lots of dislocations in the locally deformed regions during the SSRT test. The solute hydrogen weakens the interactions between these dislocations by promoting the shielding effect of stress fields, which is called hydrogen-enhanced localized plasticity mechanisms. These results provide crucial insights into the relationship between specimen geometry and hydrogen embrittlement resistance.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2234-2245
• /
• 1996

In this study residual stress in weldment was considered about the effect on the fatigue propagation and about the effect of redistribution of residual stress. Then, fatigue tests were conducted by the center notched specimens machined with welded plate. The residual stress and its redistribution after the crack growth were measured by the magnetizing stress indicator and hole-drilling method. Fatigue crack propagation was estimated by the specimens having residual stress redistributed after the cracks growth and having the effects of crack closure. Crack growth rates were predicted and compared with experimental results. It had been found that the predicted crack propagation rates have a good agreement with experimental results when the redistribution of residual stress was considerd.

• 콘크리트학회논문집
• /
• 제29권1호
• /
• pp.53-64
• /
• 2017

강섬유 보강 초고성능 콘크리트(UHPFRC)는 높은 압축강도 뿐 아니라 강섬유 보강에 의한 뛰어난 응력분산효과로 인해 높은 인장강도를 가지며, 미세균열의 확장을 통해 균열 후에도 경화거동을 하여 구조부재가 안정적으로 외력에 저항하도록 한다. 본 연구에서는 UHPFRC 재료 인장강도를 정의함에 있어 노치가 있는 휨실험과 직접인장실험을 비교하여 실험법 및 결과 분석의 장단점을 알아보았다. I-형 보의 전단부재실험은 복부의 면내전단거동을 알아보기 위하여 전단 경간비, 유효높이, 재료인장강도를 변수로 계획하였다. 실험결과를 통해 전단보강근이 없는 UHPFRC I형 보의 균열발생 이후 전단거동의 응력 재분배효과를 정량적으로 판단하고, 균열 후 거동을 기존 전단 강도식이 잘 반영하고 있는지 검토하였다. 전단철근 보강이 없는 UHPFRC 전단부재의 경우 파괴모드는 사인장 파괴로 동일하였고, 이러한 파괴모드를 가지는 부재는 전단 경간비와 유효높이에 크게 영향을 받게 되어 부재 설계 시 이러한 변수에 대한 고려가 필요한 것으로 나타났다.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.108-116
• /
• 1991

선용재료중(船用材料中)에는 정적하중(靜的荷重)에 의한 정적거동(靜的擧動)(응력-변형률관계)과 반복하중(反復荷重)에 의한 반복거동(反復擧動)(응력진폭-변형률진폭관계)이 상이(相異)하게 되는 경우가 많다. 특히 탄소성(彈塑性) 응력집중부(應力集中部)에서 진전(進展)하는 초기의 짧은 피로균열(疲勞龜裂)은 재료(材料)의 반복거동(反復擧動)에 크게 의존하여 성장하므로 재료(材料)의 정적(靜的) 및 반복거동(反復擧動)의 비교, 검토가 요구된다. 본 연구에서는 2종류의 철강재료(鐵鋼材料)(SS41, HT80)와 5종류의 Al합금(合金)(A5083-O, A6N01-T5, A7N01-T4, A7016-T6, A7178-T6)에 대하여 정적(靜的) 및 반복하중(反復荷重)에 의한 재료(材料)의 응력-변형율(應力-變形率) 관계(關係)를 비교, 검토하였고, 각(各) 재료상수(材料常數)를 구하였다. 또한 응력집중부(應力集中部)에 일정 진폭의 반복하중(反復荷重)이 작용(作用)하여 탄소성(彈塑性) 변형(變形)할 때 그 선단(先端)의 응력(應力)과 변형률(變形率) 진폭(振幅)의 변화(變化)에 미치는 재료(材料)의 반복(反復) 경화특성(硬化特性)의 영향에 대하여 Neuber법칙(法則)과 중앙(中央)노치재(材의) 실험(實驗)에 의하여 고찰(考察을 행하였다.