• 대한치과교정학회지
• /
• 제19권1호
• /
• pp.77-93
• /
• 1989

The purpose of the present study were to disclose whether the depth of the mandibular antegonial notch can be used as an indicator of mandibular growth potential. The patients composed of 76 samples and were classified following 3 groups, based on the depth of mandibular antegonial notch : Deep notch group (more than 3mm), Neutral notch group (1-3mm), Shallow notch group (less than 1mm). For each case, the first lateral cephalograms were taken prior to the start of treatment and the second films 3-4 years after. The results were as follows; 1. Deep notch group had a shorter corpus, less ramus height and greater genial angle than did Shallow notch group. 2. Deep notch group had a more retrusive mandibular position than Shallow notch group. 3. Deep notch group had longer total anterior facial height and longer anterior lower facial height group. 4. Deep notch group grow vertical clockwise growth pattern, while Shallow notch group grow horizontal counterclockwise growth pattern. 5. Deep notch group had less mandibular growth than Shallow notch group during observation period.

• Molecules and Cells
• /
• 제27권1호
• /
• pp.15-19
• /
• 2009

Notch signaling is controlled at multiple levels. In particular, stabilized Notch receptor activation directly affects the transcriptional activations of Notch target genes. Although some progress has been made in terms of defining the regulatory mechanism that alters Notch stability, it has not been determined whether Notch1/NICD stability is regulated by $GSK-3{\alpha}$. Here, we show that Notch1/NICD levels are significantly regulated by $GSK-3{\beta}$ and by $GSK-3{\alpha}$. Treatment with LiCl (a specific GSK-3 inhibitor) or the overexpression of the kinase-inactive forms of $GSK-3{\alpha}/{\beta}$ significantly increased Notch1/NICD levels. Endogenous NICD levels were also increased by either $GSK-3{\alpha}/{\beta}$- or $GSK-3{\alpha}$-specific siRNA. Furthermore, it was found that $GSK-3{\alpha}$ binds to Notch1. Deletion analysis showed that at least three Thr residues in Notch1 (Thr-1851, 2123, and 2125) are critical for its response to LiCl, which increased not only the transcriptional activity of endogenous NICD but also Hes1 mRNA levels. Taken together, our results indicate that $GSK-3{\alpha}$ is a negative regulator of Notch1/NICD.

• 대한치과교정학회지
• /
• 제19권1호
• /
• pp.123-135
• /
• 1989

This study was undertaken to investigate the relationship between the depth of antegonial notch and the craniofacial morphology, and to predict the mandibular growth direction & potential in class III malocclusion. The computerized analyses were carried out on longitudinal lateral cephalometric radiographs of 50 children with class III malocclusion, divided into two groups ; 30 deep notch subjects (more than 2.6mm) and 20 shallow notch subjects (less than 1.5mm). The conclusions were as follows: 1. The mandibular growth direction in deep notch group was more vertically directed than in shallow notch group. 2. Deep notch group had shorter anterior & posterior cranial base than shallow notch group. 3. There was not significant difference between deep & shallow notch groups in the amount of mandibular growth during treatment period. 4. Notch depth increased in both deep & shallow notch groups during treatment period.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1568-1574
• /
• 2017

This paper studied cogging torque reduction effect for sloping notch applied two notches on stator teeth. We have confirmed accuracy of FEM(Finite Element Method) through comparison previous model using asymmetric notch for experiment and 3D FEM results, and then cogging torque comparison of previous model and sloping notch model. Also the sloping notch model has been modified to step-sloping notch model to consider manufactur. The modification method of sloping notch changed the degree of slope of notch (a)(Notch(a) sloping Deg) and the degree of Slope of notch (b)(Notch(b) Sloping Deg). When Cogging torque is case of minimum, Notch (a) Sloping Deg is $-12[^{\circ}]$ and Notch(b) Sloping Deg $12[^{\circ}]$. In this case, cogging torque was about 23.9[mNm]. Cogging torque of previous model is about 40.8[mNm], so sloping notch model is less than previous model by 41.42[%]. Also, if sloping notch model is changed to step-sloping notch model, cogging torque of step-sloping notch model is about 24.82[mNm], Therefore the difference between the two cogging torque is about 3.85[%], so step-sloping notch model can be applied when considering manufacture.

• International Journal of Precision Engineering and Manufacturing
• /
• 제3권3호
• /
• pp.69-75
• /
• 2002

Measuring dynamic fracture toughness of brittle and small ceramic specimen is very difficult in a SHPB (Split Hopkinson Pressure Bar). As a countermeasure to this difficulty, a dynamic fracture toughness measuring method by the Chevron-notch ceramic specimen was proposed. Tested chevron specimens were of Chevron notch angles of 90$^{\circ}$, 100$^{\circ}$ and 110$^{\circ}$. Through finite element analysis, shape parameters of the Chevron-notch specimens according to notch angles were calculated. And the static fracture tough1ess of the Chevron-notch alumina specimen was measured as 3.8MPa√m similar to that of CT specimen with a precrack. Dynamic fracture toughness was 4.5MPa√m slightly higher than the static one. It was shown in this study that the proposed Chevron-notch specimens are valid to measure dynamic fracture toughness of extremely brittle materials such as ceramic.

• Journal of Biosystems Engineering
• /
• 제1권1호
• /
• pp.64-72
• /
• 1976

This experimental work was carried out to investigate the fatigue bending strength on various shapes and sizes of notches of the domestically manufactured steel plate. The notch types tested were a circular hole, U-and V-notches. The S-N diagram for different notch shapes were discussed in relation to plan bending strength and stress concentration factor of notches .The results of the experiments are summarized as follows : (1) The difference between stress concentration factor and notch factor was greater as the radium of notch root became smaller, and these values approached to an identical value as the radium of notch root increased. (2) It was shown that the plane bending fatigue limit of bar without notch for the hotrolled steel having the tensile strength of 33.1kg/$mm^2$was 17.0kg/$mm^2$. (3) U-and V-notch had a greater effect of stress concentration factor on the endurance limit, but O-hole showed the same effect only for $\o\pm2mm$. (4) For the same radius of notch root, U-notch showed a lower value of fatigue limit compared to V-notch and O-hole.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.636-642
• /
• 1989

본 논문은 복합재의 3차원 파괴거동에 대한 기초 연구의 하나로, 탄성 계수가 서로 다른 물체로 구성된 2상접합재에서 군열선단의 국소영역에서의 3차원적인 파괴거동을 위의 매입격자법을 적용하여 균열선단의 3차원적인 변형율 분포상태와 노치로부터의 군열발생점 및 그 진행 방향과의 상관 관계를 살펴보았다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.58-63
• /
• 2002

This study has performed rotary bending fatigue testing that smooth specimen using SM45C materials and notched specimen whose radii were R6, R4 and R2, were processed in 3% NaCl aqueous solutions or in the air. The results are as followed; 1. In the air fatigue limit at 10$^{7}$ cycles remarkably reduced as notch radius goes small. 2. In 3% NaCl aqueous solution fatigue strength at 10$^{6}$ cycles also had large range of reduction as notch radius goes small. 3. Comparing fatigue strength in the air, fatigue strength at 10$^{6}$ cycles in 3% NaCl aqueous solution reduced by 46.2% at smooth specimen, 55.3% at R6 notch radius, 45.8% at R4 and 39.7% at R2 respectively. 4. The reason that fatigue strength reduced in the reduction of notch radius sire was because the surface of notch exposed in corrosion was small and consequently it was less corroded.

• Journal of the Korean Wood Science and Technology
• /
• 제26권4호
• /
• pp.6-12
• /
• 1998

Test results of domestic softwood lumber were presented to examine the notch effect of beams and compare to present AIJ(Architecture Institute of Japan) formula in notched wood member especially positioned in bottom side (tension side) of a beam. Notched lumber was tested under following condition : each specimen supported simply, and subjected to third-point loading at points of 1/3 of the span length. Notch was located opposite side to loading direction and notch depth were 1/6, 1/4, 1/3 of beam depth. Deflection and load were measured by digital dial guage each in 25kgf increment. Bending test results were as follows; Mpro/Mmax range (proportional and maxium bending moment ratio in notched beam) was 0.5 - 0.65. It was considered that maxium bending moment was about 1.5 times to proportional bending moment in notched beam and showed same tendency in the test result of ordinary wood specimens. AU standard formula for the tension side notch, Mmat = 0.6 ${\times}$ (Zo $\sigma$), the constant 0.6 was suitble for notch ratio(notch depth to beam depth) 1/6, but this ratio for 1/4, and 1/3 was not. So it is preferable to accept smaller value than 0.6 for notch ratio more than 1/3. These experiment results showed critical effect in tension side notched wood beam especially in greater than notch ratio 1.3 of wood beam. From the above results, it is recommened to revise design formula adoptable to domestic wood constructon member with tension side notched member.

• Journal of Korean Neurosurgical Society
• /
• 제61권4호
• /
• pp.441-449
• /
• 2018

Objective : Notch receptors are heterodimeric transmembrane proteins that regulate cell fate, such as differentiation, proliferation, and apoptosis. Dysregulated Notch pathway signaling has been observed in glioblastomas, as well as in other human malignancies. Nerve growth factor (NGF) is essential for cell growth and differentiation in the nervous system. Recent reports suggest that NGF stimulates glioblastoma proliferation. However, the relationship between NGF and Notch1 in glioblastomas remains unknown. Therefore, we investigated expression of Notch1 in a glioblastoma cell line (U87-MG), and examined the relationship between NGF and Notch1 signaling. Methods : We evaluated expression of Notch1 in human glioblastomas and normal brain tissues by immunohistochemical staining. The effect of NGF on glioblastoma cell line (U87-MG) was evaluated by 3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide (MTT) assay. To evaluate the relationship between NGF and Notch1 signaling, Notch1 and Hes1 expression were evaluated by reverse transcription polymerase chain reaction (RT-PCR) and Western blot analysis, respectively. To confirm the effects of NGF on Notch1 signaling, Notch1 and Hes1 small interfering RNAs (siRNAs) were used. Results : In immunohistochemistry, Notch1 expression was higher in glioblastoma than in normal brain tissue. MTT assay showed that NGF stimulates U87-MG cells in a dose-dependent manner. RT-PCR and Western blot analysis demonstrated that Notch1 and Hes1 expression were increased by NGF in a dose-dependent manner. After transfection with Notch1 and Hes1 siRNAs, there was no significant difference between controls and 100 nM $NGF-{\beta}$, which means that U87-MG cell proliferation was suppressed by Notch1 and Hes1 siRNAs. Conclusion : These results indicate that NGF stimulates glioblastoma cell proliferation via Notch1 signaling through Hes 1.