• 대한교통학회지
• /
• 제14권1호
• /
• pp.135-154
• /
• 1996

This paper presents a heuristic algorithm for classifying vehicles using a single loop detector. The data used for the development of the algorithm are the frequency variation of a vehicle sensored from the circle-shaped loop detectors which are normal buried beneath the expressway. The pre-processing of data is required for the development of the algorithm that actually consists of two parts. One is both normalization of occupancy time and that with frequency variation, the other is finding of an adaptable number of sample size for each vehicle category and calculation of average value of normalized frequencies along with occupancy time that will be stored for comparison. Then, detected values are compared with those stored data to locate the most fitted pattern. After the normalization process, we developed some frameworks for comparison schemes. The fitted scales used were 10 and 15 frames in occupancy time(X-axis) and 10 and 15 frames in frequency variation (Y-axis). A combination of X-Y 10-15 frame turned out to be the most efficient scale of normalization producing 96 percent correct classification rate for six types of vehicle.

• Structural Engineering and Mechanics
• /
• 제76권1호
• /
• pp.101-114
• /
• 2020

In this paper, an improved experience-based learning algorithm (EBL), termed as IEBL, is proposed to solve the nonlinear hysteretic parameter identification problem with Bouc-Wen model. A quasi-opposition-based learning mechanism and new updating equations are introduced to improve both the exploration and exploitation abilities of the algorithm. Numerical studies on a single-degree-of-freedom system without/with viscous damping are conducted to investigate the efficiency and robustness of the proposed algorithm. A laboratory test of seven lead-filled steel tube dampers is presented and their hysteretic parameters are also successfully identified with normalized mean square error values less than 2.97%. Both numerical and laboratory results confirm that, in comparison with EBL, CMFOA, SSA, and Jaya, the IEBL is superior in nonlinear hysteretic parameter identification in terms of convergence and accuracy even under measurement noise.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1783-1793
• /
• 1993

Pattern recognition technique using fuzzy c-means algorithm and multilayer perceptron was applied to classify tool wear states in turning. The tool wear states were categorized into the three regions 'Initial', 'Normal', 'Severe' wear. The root mean square(RMS) value of acoustic emission(AE) and current signal was used for the classification of tool wear states. The simulation results showed that a fuzzy c-means algorithm was better than the conventional pattern recognition techniques for classifying ambiguous informations. And normalized RMS signal can provide good results for classifying tool wear. In addition, a fuzzy c-means algorithm(success rate for tool wear classification : 87%) is more efficient than the multilayer perceptron(success rate for tool wear classification : 70%).

• 한국통신학회논문지
• /
• 제25권7A호
• /
• pp.1076-1083
• /
• 2000

Vehicle license plate recognition identifies vehicle as a unique, and have many applications in traffic monitoring field. In this paper, a vertical edge based algorithm to extract license plate within input gray-scale image is proposed. A size-and-shape filter based on seed-filling algorithm is applied to remove the edges that are impossible to be the vertical edges of license plate. Then the remaining edges are matched with each other according to some restricted conditions so as to locate license plate in input image. After license plate is extracted. normalized and segmented, the characters on it are recognized by template matching method. Experimental results show that the proposed algorithm can deal with license plates in normal shape effectively, as well as the license plates that are out of shape due to the angle of view.

• 한국지반공학회논문집
• /
• 제37권10호
• /
• pp.77-87
• /
• 2021

도심지에서 발생하는 지반함몰의 위험도를 분석하고 예측 및 예방하기 위한 연구가 다양하게 진행되었다. 기존의 연구 중에 지하매설물의 밀도(즉, 대상 공간 주변 지중에 설치된 매설물의 공간적인 물량)와 지반함몰 발생의 상관성을 활용한 위험도 분석 연구는 미비하다. 본 논문에서는 GIS기반 공간정보 데이터를 활용하여 지하에 설치되어 있는 매설물의 선형밀도(line density)를 분석하고, 이를 이력지반함몰 발생 현황과 연계하는 연구를 수행하였다. 분석 대상 지역에 대하여 2010~2015년 사이에 발생한 29개 이력지반함몰과 6종 지하매설물 선형밀도의 상관관계를 극대화하기 위한 최적화 알고리즘을 개발하였고, 보편적인 분석을 위해 정규선형밀도의 개념을 제안하였다. 분석 대상 지역의 정규선형밀도를 5개 등급(1등급 최저, 5등급 최고)으로 구분하였으며, 최적화 알고리즘을 적용할 경우 이력지반함몰 위치에서 정규선형밀도가 4등급 이상인 경우가 약 80%이상으로 나타났다. 제안된 최적화 알고리즘을 활용하여 지하매설물의 밀집도 분석 결과를 지반함몰 위험도 분석에 적용할 수 있을 것으로 판단된다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.99-105
• /
• 2001

In this paper, the selective normalized constant modulus algorithm(SNCMA) is applied to a fractionally spaced equalizer. The fractionally spaced equalizer is insensitive to the sampling timing because it processes received signals with the sampling rate larger than the symbol rate. The SNCMA improves the convergence rate by using the large step size for the most outer covering symbol belonging to the trust-level. This blind equalizer exhibits a fast start-up convergence rate as well as a reduced steady-state residual error compared to the fractionally spaced blind equalizer and the T-spaced blind equalizer using conventional blind algorithms.

• Journal of Information Technology Applications and Management
• /
• 제14권1호
• /
• pp.137-144
• /
• 2007

In this paper, we propose a rotation resistant robust logo embedding watermarking technique. Geometric manipulations make the detection process very complex and difficult. Watermark embedding in the normalized image directly suffers from smoothing effect due to the interpolation during the image normalization. This can be avoided by estimating the transform parameters using image normalization angle and moments, instead of embedding in the normalized image. Conventional rotation resistant schemes that use full frame transform. In this paper we adopt DCT and calculate masking using a spatio-frequency localization of the $8{\times}8$ block DCT coefficients. Experimental results show that the proposed algorithm is robust against rotation process.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 The Third Asian Fuzzy Systems Symposium
• /
• pp.107-112
• /
• 1998

In this paper, we propose a new paradigm (NEW_BP) to be capable of overcoming limitations of the traditional backpropagation(OLD_BP). NEW_BP is based on the method of conjugate gradients with the normalized direction vectors and computes step size through the linear search which may be characterized by order statistics and golden section. Simulation results showed that NEW_BP was definitely superior to both the stochastic OLD_BP and the deterministic OLD_BP in terms of accuracy and rate of convergence and might sumount the problem of local minima. Furthermore, they confirmed us that stagnant phenomenon of training in OLD_BP resulted from the limitations of its algorithm in itself and that unessential approaches would never cured it of this phenomenon.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.190-193
• /
• 2003

The DOA(Direction Of Arrival) estimation to select a best beam for receiving a particular signal in switched beam antenna systems, and to shape the optimal beam in adaptive array antenna systems, is typically performed under the assumption that the target user motion is almost negligible. In this paper, we model the user as the time-varying source and adopt the LPA(Local Polynomial Approximation) tracking algorithm, proposed by Katkovnik, to solve the time-varying DOA estimation problem. Then, we compare the power spectrum functions between the LPA beamformer and the conventional beamformer, also, the normalized SNRs of each beamformer. The results show that the LPA beamformer is robuster than the conventional beamformer in tine-varying environments. In addition, in case of the conventional beamformer, more array elements give rise to more degradation in the aspect of SNR.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권7호
• /
• pp.2400-2419
• /
• 2014

Pre-segmented pixels can reduce the difficulty of segmentation and promote the segmentation performance. This paper proposes a novel segmentation method based on merging texture superpixels by computing inner similarity. Firstly, we design a set of Gabor filters to compute the amplitude responses of original image and compute the texture map by a salience model. Secondly, we employ the simple clustering to extract superpixles by affinity of color, coordinates and texture map. Then, we design a normalized histograms descriptor for superpixels integrated color and texture information of inner pixels. To obtain the final segmentation result, all adjacent superpixels are merged by the homogeneity comparison of normalized color-texture features until the stop criteria is satisfied. The experiments are conducted on natural scene images and synthesis texture images demonstrate that the proposed segmentation algorithm can achieve ideal segmentation on complex texture regions.