• Electrical & Electronic Materials
• /
• v.1 no.1
• /
• pp.35-43
• /
• 1988

In this study, PLZT ceramics were fabricated by the freeze-drying and normal sintering method. The composition rate of the specimen was selected 9/65/35(La/Zr/Ti) which had good optical and dielectric properties, sintering time was varied 1, 10, 30, 50, 55, 60 and 65(hr) at 1250(.deg.C). After sintering, the optical and dielectric properties were investigated with the grain size. As the result of the experiment, the particle size of the powder prepared by freeze-drying method was less than 1(um). The relative dielectric constant was increased linearly with the sintering time and specimen sintered for 65(hr) had the highest value, 5780. Grain was grown with increasing time, in the case of specimen sintered for 60(hr), the grain size was 8.4(um). Transmittance was increased with the grain size. In the case of 8.4(um) grain size, the transmittance was 56(%). Curie temperature was decreased linearly by the surface-layer effect of space-charge. In the case of grain size, 1.8(um), 8.4(um), curie temperatures were appeared at 100(.deg.C) and 80(.deg.C), respectively.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.78-83
• /
• 2003

Characterization of an ultra precision grinding plate for GMR head manufacturing is performed by measuring frictional forces between the grinding plate and the advanced ceramic Two kinds of methods of producing the precision grinding plates are presented: texturing and micro-channeling. Texturing is effective in terms of production time but micro-channeling excels in quality control. It is found that the frictional coefficient of a precision grinding plate decreases as the impregnation of diamond grain onto the precision-grinding plate progresses, and remains unchanged once the impregnation process is successfully completed, even after 100 revolutions of the precision-grinding plate against the advanced ceramic under 40 N of normal force. Therefore, the measurement of the frictional coefficient can replace costly and time-consuming process of estimating the level of impregnation of diamond grain on the precision-grinding plate, which has been performed by using scanning electron microscope, and be employed as an index to determine the level of impregnation of diamond grain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.2
• /
• pp.208-214
• /
• 2008

This paper presents a structural modification for the performance improvement of a grain sorting machine. The grain sorting machine is used to sort abnormal grains from normal grains such as rice or wheat. Vibration is one of main causes to deteriorate the sorting performance of the machine. Based on the finite element analysis and the experimental modal testing, the vibration characteristics were investigated for the sorting machine. Furthermore, in order to improve the sorting performance of the machine, the frame, chute and base plate of the sorting machine were modified by using the results of the vibration analysis.

• Progress in Superconductivity and Cryogenics
• /
• v.19 no.3
• /
• pp.33-39
• /
• 2017

This study presents that the orientation and the geometry of seed affect on the growth behavior of melt processed single grain REBCO bulk superconductor and its magnetic properties. The effects of seed geometry have been investigated for thin $30mm{\times}30mm$ rectangular powder compacts. Single grain REBCO bulk superconductors have been grown successfully by a top seed melt growth method for 8-mm thick vertical thin REBCO slab. Asymmetric structures have been developed at the front surface and at the rear surface of the specimen. Higher magnetic properties have been obtained for the specimen that c-axis is normal to the specimen surface. The relationships between microstructure, grain growth and magnetic properties have been discussed.

• Journal of the Korean Ceramic Society
• /
• v.43 no.11 s.294
• /
• pp.728-733
• /
• 2006

The equilibrium or growth shape of ceramic materials is classified largely into two categories according to the thermodynamic conditions imposed. One is a polyhedral shape where the surface free energy is anisotropic, and the other a spherical shape where the surface free energy is isotropic. In the case of grains with a polyhedral shape of anisotropic surface free energy, socalled abnormal grain growth usually takes place due to a significant energy barrier for a growth unit to be attached to the crystal surface. In the case of grains with a spherical shape of isotropic surface free energy, however, normal grain growth with a uniform size distribution takes place. In this contribution, the state-of-the-art of our current understanding of the relationship between the crystal shape and the microstructure evolution during the sintering of ceramic materials in the presence of a liquid phase was discussed.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.526-534
• /
• 2019

The average coastline and the erosion control line introduced as the management coastline, and the average shoreline (MSL) was established from the observed coastline. Also, the median grain size and the wave height of 30-years return period were applied. The erosion control line (ECL) was established through the model, HaeSaBeeN. These two lines set the coastline for evaluation. Based on the observed monitoring data along the coastline, the 1-day variation according to the normal distribution was used to estimate the regional variation, and the width of the erosion was calculated by applying the median grain size (D₅₀) and the wave height of 30-years return period through the high-wave coastal erosion width model, i.e., HaeSaBeeN.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.83-91
• /
• 2018

Land reclamation, coastal construction, coastline extension and port construction, all of which involve dredging, are increasingly required to meet the growing economic and societal demands in the coastal zone. During the land reclamation, a portion of landfills are lost from the desired location due to a variety of causes, and therefore prediction of sediment transport is very important for economical and efficient land reclamation management. In this study, laboratory disposal tests were performed using an open channel, and suspended sediment transport was analyzed according to flow velocity and grain size. The relationships between the average and standard deviation of the deposition distance and the flow velocity were almost linear, and the relationships between the average and standard deviation of deposition distance and the grain size were found to have high non-linearity in the form of power law. The deposition distribution of sediments was demonstrated to have log-normal distributions regardless of the flow velocity. Based on the experimental results, modeling of suspended sediment transport was performed using deep neural network, one of deep learning techniques, and the deposition distribution was reproduced through log-normal distribution.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2771-2782
• /
• 2022

When assessing the radiological consequences of postulated accident scenarios, it is of primary interest to determine the amount of radioactive fission gas accumulated in the fuel rod free volume. The state-of-the-art semi-empirical approach (ANS 5.4-2010) is reviewed and compared with a mechanistic approach to evaluate the release of radioactive fission gases. At the intra-granular level, the diffusion-decay equation is handled by a spectral diffusion algorithm. At the inter-granular level, a mechanistic description of the grain boundary is considered: bubble growth and coalescence are treated as interrelated phenomena, resulting in the grain-boundary venting as the onset for the release from the fuel pellets. The outcome is a kinetic description of the release of radioactive fission gases, of interest when assessing normal and off-normal conditions. We implement the model in SCIANTIX and reproduce the release of short-lived fission gases, during the CONTACT 1 experiments. The results show a satisfactory agreement with the measurement and with the state-of-the-art methodology, demonstrating the model soundness. A second work will follow, providing integral fuel rod analysis by coupling the code SCIANTIX with the thermo-mechanical code TRANSURANUS.

• Journal of the Korean Ceramic Society
• /
• v.21 no.1
• /
• pp.27-32
• /
• 1984

During the last decade there have been many studies on the new ceramics especially engineering ceramics. Sintered silicon carbide is one of the main materials in engineering ceramics. This study shows the effects of surface treatment and microstructure especially the abnormal grain growth on the strength of sintered SiC. Surface of sintered SiC and treated with 400, 800 and 1200 grit diamond wheel. Grain growth is introduced by increasing the sintering times at 205$0^{\circ}C$. The $\beta$longrightarrow$\alpha$ transformation occurs during the sintering of $\beta$-starting materials and is often accompanied by abnormal grain growth. The overall strength distribution are estimated using the Weibull statistics. The results show that the strength of sintered SiC is limited by extrinsic surface flaws in normal-sintered specimens. And it is sound that the finer the surface finishing and the grain size the higher the strength results. But the strength of abnormal sintering specimens is limited by the abnormally-grown large tabular grains. The Weibull modulus increases with the decreasing grain size and the decreasing grit size of grinding.

• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.98-101
• /
• 2006

Electron transport properties of nanostructured Pb thin film, consisting of grains, have been studied. Nanostructured thin films were fabricated on a substrate held at low temperature and their thicknesses were less than 10nm. While temperature of the film increased from 1.3 K to room temperature, the change in normal state sheet resistance has been measured. As the annealing temperature varies, the normal state sheet resistance shows a non-monotonic and irreversible change. Such behavior can be understood with the Pb grain growth due to annealing of the film.