• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.2
• /
• pp.83-92
• /
• 2016

In this paper, we introduce the results of the testing and observation systems for performance wideband expansion in the Korean VLBI Network(KVN). The KVN performs VLBI observations to 1024 Mbps data rate, and 8192 Mbps observing for four simultaneous observation is now evaluating for normal operation. The VLBI stations in several world countries developed their own wideband observing systems to observe the celestial objects with high precision and high resolution or are working with several countries. The KVN is planning to introduce a high-speed sampler, OCTAD, for sampling directly up to 2048 MHz bandwidth for RF signal of K/Q/W/D band in the frequency band without conversion. Therefore, as a preliminary study for the performance scalability of the KVN then through the close cooperation with National Astronomical Observatory of Japan (NAOJ), the OCTAD high-speed sampler and OCTADISK2 high-speed recorder were installed in the KVN Yonsei station, and verify the performance through a wideband.

• 대한방사선치료학회:학술대회논문집
• /
• 2005.06a
• /
• pp.23-26
• /
• 2005

Introduction: To evaluate whether modified MUPIT applicator can effectively eradicate recurrent tumor in uterine cervix cancer and reduce rectal complication after complete radiation treatment. Methods and Materials: Modified MUPIT applicator basically consists of an acrylic cylinder with flexible brain applicator , an acrylic template with a predrilled array of holes that serve as guides for interstitial needles and interstitial needles. CT scan was performed to determine tumor volume and the position of interstitial needles. Modified MUPIT applicator was applied to patient in operation room and the accuracy for position of interstitial needles in tumor volume was confirmed by CTscan. Brachytherapy was delivered using modified MUPIT applicator and RALS (192-Ir HDR) after calculated computer planning by orthogonal film. The daily dose was 600cGy and the total dose was delivered 3000cGy in tumor volume by BID. Rectal dose was measured by TLD at 5 points so that evaluated the risk of rectal complication. Result: The application of modified MUPIT applicator improved dramatically dose distributions in tumor volume and follow-up of 3 month for this patient was clinically partial response without normal tissue complication, Rectal dose was measured 34.1cGy, 57.1cGy, 103.8cGy, 162.7cGy, 165.7cGy at each points, especially the rectal dose including previous EBRT and ICR was 34.1cGy, 57.1cGy Conclusion: Patients with locally recurrent tumor in uterine cervix cancer treated with modified MIUPIT applicator can expect reasonable rates of local control. The advantages of the system are the fixed geometry Provided by the template and cylinders, and improved dose distributions in irregular tumor volume without rectal complication

• Resources Recycling
• /
• v.25 no.1
• /
• pp.48-59
• /
• 2016

The earth has been warming due to $CO_2$ gas emissions from fossil fuel cars and a ship. So the hydrogen fuel cell vehicle(FCV) using hydrogen as a fossil fuel alternative energy is in the spotlight. Hyundai Motor Company of Korea and a car companies of the US, Japan, Germany is developing a FCV a competitive. Obtained hydrogen as a by-product of the coke plant, oil refineries, chemical plants of steel mill, coal is reacted with steam at high temperatures, methane gas, manufacture of high purity hydrogen Methane Steam Reforming and hydrogen detachable reforming method using the Pressure Swing Adsorption or Membrane Reforming technical or decomposition of water to produce electricity. Hydrogen is the electronic industry, metal and chemical industries, which are used as rocket fuel, etc. are used in factories, hospitals, home of the fuel Ene.Farm system or FCV. And a method of storing hydrogen is to store liquid hydrogen and a method for compressing normal hydrogen to the hydrogen container, by storing the latest hydride or Organic chemical hydride method is used to carry the hydrogen station. Korea is currently 13 hydrogen stations in place and in operation, plans to install a further 43 places.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.443-447
• /
• 2003

In this work. using 0.2 GaAs modulation doped FET(MODFET), a high performance DBS downconverter MMIC was developed for direct broadcasting satellite (DBS) application. Without LNA, the downconverter MMIC showed a very low noise of 4.8 dB, which is lower by 3 dB than conventional ones. A low LO power of -10 dBm was required for the normal DBS operation of the downconverter MMIC. which reduced the power consumption via a removal of LO amplifier on MMIC. It required only a low power consumption of 175 mW, which is lower than 70 percent of conventional ones. The LO leakage power at IF output was suppressed to a lower level than 30 dBm, which removes a bulky LO rejection filter on a board. The fabricated chip, which include a mixer, If amplifiers. LO rejection filter, and active balun, exhibited a small size of $0.84{\times}0.9\textrm{mm}^2$.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.18 no.1
• /
• pp.128-141
• /
• 2005

Objective : This study was undertaken to investigate the effects of Eucommiae Cortex on the osteoporosis in ovariectomized rats. Materials and Methods : We used Sprague-Dawley female rats in 8-week-old. They were divided into three groups. Sample group was ovariectomized and administered with 10 mg/100 g/day Eucommiae Cortex extract solution for 10 weeks. Control group was ovariectomized and sham group was conducted by sham's operation. And control group and sham group were administered with normal saline as the same way. We measured rats's body and uterus weight and also measured the serum levels of Ca, phosphorus and ALP. We stained the specimens of rat's tibial bones with Goldner's modified Masson's Trichrome and then examined bone histomorphometry with Bioquant computer program of image analysis system. We measured the thickness of osteoid and callus as static parameters and measured bone volume and mineral apposition rate as dynamic parameters. We observed the expressions of RANKL and OPG mRNA of the tibial bone by RT-PCR. Results : The body weight was significantly (p<0.05) increased in control and sample groups compared with sham group, respectively. The uterus weight was significantly (p<0.05) decreased in control and sample group compared with sham group. In the change of Ca, phosphorus and ALP there were no significant changes among three groups. There were no significant changes of trabecula cortical and osteoid bones' thickness and volume. But trabecula mineral apposition rate (MAR) was significantly (p<0.05) increased in sham and sample group compared with control group. In the expression of RANKL mRNA, sample group was decreased compared with control group, and in that of OPG mRNA, sample group was increased compared with control group. Conclusion : This study shows that Eucommiae Cortex has the beneficial effects on bone histomorphometry and metabolism in the ovariectomized rats. We suggest that Eucommiae Cortex be useful for the treatment of osteoporosis.

• Archives of Plastic Surgery
• /
• v.37 no.4
• /
• pp.391-395
• /
• 2010

Purpose: Given that the critical nature of the microvascular anastomosis to what is often a long and difficult reconstructive operation, trainees need to have a high level of microsurgical competence before being allowed to perform microsurgery on patients. Some artificial substitutes and dead or live animal models have been used to improve manual dexterity under the operating microscope. Yet, most surgeons are not equipped with such models, so search for easy available and appropriate microsurgical practice model have been an issue. Umbilical artery, placental vessels and gastroepiploic arteries have been previously suggested as a microsurgical training model, which involves other surgical departments. The purpose of this article is to introduce that saphenous vein specimen obtained from varicose vein surgery is useful and has many advantages as training model for the practice of microvascular anastomosis. Methods: The conventional technique using perforation/inversion method with a metallic stripper is widely performed for varicose vein patients. The stripper is inserted through disconnected safeno-femoral junction and retrieved at the knee or the medial side of ankle. The length of saphenous vein specimens removed is about that of one's leg and inversed from inside out. Obtained saphenous vein specimens are re-inversed and cleansed with normal saline, to be readily available for microsurgical practice. Preserved in a squeezed wet saline gauze and refrigerated, frozen or glycerated specimens were investigated into their comparative quality for microsurgical practice. Results: Varicose vein surgery remains one of the common operations performed in the field of plastic surgery. Convenient informed consent regarding the vessel donation can be easily signed. The diameter of the obtained saphenous vein is as variable as 1.5 to 6 mm, which is already stripped, and is in sufficient length corresponding to that of patient's leg. Vessels specimens were available for microsurgical practice within 1 week period when preserved with squeezed wet saline gauze, and the preservation period could be extended monthly by freezing it. Conclusion: Saphenous vein obtained from varicose vein patients provide with variable size of vessel lumen with sufficient length. The practice can be cost effective and does not require microsurgical laboratory. Additionally there is no need of involving other surgical departments in acquiring vessel specimens. Furthermore, simple preservation method of refrigerating for a week or freezing with squeezed wet saline gauze for a month period, allow the saphenous vein obtained after varicose vein surgery as an excellent model for the microsurgical practice.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.1
• /
• pp.41-48
• /
• 1982

113 patients with nodular goiter were studied cytologically by needle aspiration for differential diagnosis at the department of internal medicine, Chung Nam National University Hospital since October 1980 till July 1981, and the final diagnosis taken from biopsies were compared with the cytologic method on the 44 cases who received operation. The results were obtained as follows: 1. Among the 113 cases of total patients, male were 15 cases (13.3%) and female were 98 cases (86.7%) and the sex ratio (M:F) was 1 : 6.5. The peak age incidence was in the third decade followed by forth and second decades. 2. The findings of cytological diagnosis in 113 cases showed benign adenoma in 69 cases (61.1 %), Subacute and chronic thyroiditis in 22 cases(19.5%), papillary carcinoma in 15 cases (13.3%) and follicular carcinoma in 7 cases (6.2%), respectively, and 48 cases (69.6%) of the.adenomas and 2 cases(9.1%) of papillary carcinomas showed combined cystic degeneration of the nodules. 3. The diameter of the nodules by palpation revealed within $2\sim5cm$ in 88 cases (77.9%) out of 113 cases, below 2 cm in 17 cases and over 5cm in 8 cases and there were no significant relationship between the size of the nodule and disease entity. 4. The findings of thyroid scintigram using $^{131}I$ in 113 cases of nodular goiter showed "cold nodule" in 111 cases (98.2%) and normal scan (radioactivity) in 2 cases (1.8%) which showed adenoma in cytology and there was no cases with "hot nodule". 5. The thyroid functions of the 113 cases revealed as euthyroidism in 108 cases (95. 6%), hypothyroidism in 2 cases (1.8%) who showed chronic thyroiditis and hyperthyroidism in 3 cases (2.7%) in adenomas but there was no evidence that the nodules of the above 3 cases were the reason of hyperthyroidism. 6. In 44 operated cases, the histological diagnosis revealed 23 cases of adenoma out of 27 cases(85.2%) who were diagnosed as adenoma by cytology and 15 cases of malignancy out of 17 cases (88.2 %), and the overall diagnostic accuracy of aspiration cytology was 86.4 %.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.4
• /
• pp.339-345
• /
• 2008

The heat exchanger tube in nuclear power plants is mainly fabricated from nonferromagnetic material such as a copper, titanium, and inconel alloy, but the moisture separator & reheater tube in the turbine system is fabricated from ferromagnetic material such as a carbon steel or ferrite stainless steel which has a good mechanical properties in harsh environments of high pressure and temperature. Especially, the moisture separator & reheater tubes, which use steam as a heat transfer media, typically employ a tubing with integral fins to furnish higher heat transfer rates. The ferromagnetic tube typically shows superior properties in high pressure and temperature environments than a nonferromagnetic material, but can make a trouble during the normal operation of power plants because the ferrous tube has service-induced damage forms including a steam cutting, erosion, mechanical wear, stress corrosion cracking, etc. Therefore, nondestructive examination is periodically performed to evaluate the tube integrity. Now, the remote field testing(RFT) technique is one of the solution for examination of ferromagnetic tube because the conventional eddy current technique typically can not be applied to ferromagnetic tube such as a ferrite stainless steel due to the high electrical permeability of ferrous tube. In this study, we have designed RFT probes, calibration standards, artificial flaw specimen, and probe pusher-puller necessary for field application, and have successfully carry out RFT examination of the moisture separator & reheater tube of nuclear power plants.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.458-467
• /
• 2002

There has been proposed many simplification algorithms for effectively decreasing large-volumed polygonal surface data. These algorithms apply their own cost function for collapse to one of fundamental simplification unit, such as vertex, edge and triangle, and minimize the simplification error occurred in each simplification steps. Most of cost functions adopted in existing works use the error estimation method based on distance optimization. Unfortunately, it is hard to define the local characteristics of surface data using distance factor alone, which is basically scalar component. Therefore, the algorithms cannot preserve the characteristic features in surface areas with high curvature and, consequently, loss the detailed shape of original mesh in high simplification ratio. In this paper, we consider the vector component, such as surface orientation, as one of factors for cost function. The surface orientation is independent upon scalar component, distance value. This means that we can reconsider whether or not to preserve them as the amount of vector component, although they are elements with low scalar values. In addition, we develop a simplification algorithm based on half-edge collapse manner, which use the proposed cost function as the criterion for removing elements. In half-edge collapse, using one of endpoints in the edge represents a new vertex after collapse operation. The approach is memory efficient and effectively applicable to the rendering system requiring real-time transmission of large-volumed surface data.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.117-125
• /
• 2016

Purpose - As consumers' needs for purchasing fresh and safe food have been bigger in Korea, their interest in local food is also growing recently. So, the number of local food stores has been increased from 3 in 2012 to 103 in 2015. Local food stores should operate a business responding consumers' needs in order that local food stores are not to be a one-time fad. Therefore, the purpose of this study is to analyze the characteristics of consumers who use a local food store and provide helpful implications to design a strategy for sustainable growth of local food store. Research design, data, and methodology - In this study, Probit model was used for empirical analysis in order to examine the effect of purchase choice attributes of agricultural products, consumer's satisfaction, and their demographic factors upon the intention to use a local food store. After estimating coefficients of the probit model, marginal effects were calculated as a standard normal, and cumulative distribution is differentiated with respect to explanatory variables. To collect the data, questionnaire survey was carried out with the consumers using the local food store (Youngjin Nonghyup near to Jeonju city located in Jeollabuk-do). Result - The data analysis found that the more consumers are satisfied with local food store, the higher intention they have to use the local food store. In addition, it was known that the factors related to quality of agricultural products and shopping convenience among the purchase choice attributes have a considerable impact on the purchase intention of a local food store. In demographic factors, income was turned out to be an important factor affecting purchase intention of local food. Such a result supports the hypothesis that high income consumers are likely to purchase local food, which is based on the inference that consumers who have a high income tend to pursue wellbeing life. Futhermore, information delivery, through a reputable media source among general factors, was known to play an important role in forming an intention to purchase local food. According to the analysis of marginal effects, probability of purchase intention of a local food store is increased by 11.4%, if a monthly average income of a household is above 4.5 million Won(Korean currency). If purchasing satisfaction with local food stores is high, the probability of purchase intention would be increased by 24.1%. Likewise, such a probability goes up by 8.7%, 5.8%, respectively as an increasing one unit of quality of agricultural products and shopping convenience of local food stores, respectively. Conclusion - For attaining sustainable growth in a local food store, it is considered necessarily to establish a proper store operation system to meet consumers' needs, especially for quality and shopping convenience of local food. Moreover, as it was found that appropriate communication through media source has a positive effect on the intention to use local food store, PR activity seems to be necessary to expand the consumers' demands for local foods.