• 제목/요약/키워드: Normal Gravity

검색결과 182건 처리시간 0.041초

부력을 받는 확산화염에 대한 수치 시뮬레이션 (Numerical Simulation of Buoyant Diffusion Flame)

  • 오창보;이의주
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.234-237
    • /
    • 2008
  • A direct numerical simulation (DNS) code suitable for the prediction of buoyant jet diffusion flames was developed in this study. The thermodynamic and transport properties were evaluated using CHEMKIN package to enhance the prediction performance of the developed DNS code. A two dimensional simulations were performed for the jet diffusion flames in normal and zero-gravity conditions where the Froude numbers are 5 and infinity, respectively. The simulated buoyant jet diffusion flame in normal gravity showed that the unsteady and dynamic motion although the reynolds number is low (400). It was identified that the flame in normal gravity flickered periodically. The periodic motion of the flame disappeared in zero-gravity condition. The dynamic motion of the buoyant jet diffusion flame could be well understood by comparing the flame structures obtained by the simulations of normal and zero-gravity conditions.

  • PDF

정상중력 및 무중력에서의 저변형율 대향류화염의 전산 (Computation of a Low Strain Rate Counterflow Flame in Normal and Zero Gravity)

  • Woe-Chul Park
    • 한국안전학회지
    • /
    • 제17권3호
    • /
    • pp.107-111
    • /
    • 2002
  • 닥트의 두께와 속도 경계조건이 정상중력 및 무중력 상태에서 화염구조에 미치는 영향을 조사하기 위해 81%의 질소와 19%의 메탄이 혼합된 가연성가스와 공기의 저변형율 (20 s-1) 대향류 화염을 수치법으로 모사하였다. 정상중력에서는 닥트의 두께와 속도 경계조건에 따라 화염의 위치가 이동함으로써 그 영향이 컸으나, 무중력에서는 그 영향을 무시할 수 있을 정도로 작은 것으로 나타났다. 화염구조의 차이는 부력으로 인한 것이고, 따라서 정상중력에서의 측정에서는 닥트 두께와 속도 경계조건의 영향을 고려해야 함을 알 수 있었다.

우리나라 수준점의 중력기반 정표고 결정 (The Determination of Orthometric Height based on Gravity in Korea)

  • 이유정;최윤수;권재현;이지선
    • 한국측량학회지
    • /
    • 제28권1호
    • /
    • pp.99-106
    • /
    • 2010
  • 우리나라의 수직기준은 인천만의 평균해수면을 기준으로 전역의 수준점 표고가 결정된다. 현재 국토지리 정보원에서 제공하는 고시성과는 실제 중력의 영향을 고려하는 대신 정규중력식에 의한 타원보정량을 이용하여 수준점 간 높이차를 보정한 뒤 인천의 수준원점을 고정하고 최소제곱법을 수행하여 산출한 정규정표고이다. 하지만 우리나라의 경우 국토의 70%가 산지로 이루어져 있으며 지형의 기복이 심하고, 남-북 방향으로 뻗어있는 산맥을 가로지르는 수준노선이 있으므로 중력에 의한 영향을 무시할 수 없음에도 불구하고 아직까지 그 영향을 고려하지 못하고 있는 실정이다. 따라서 본 연구에서는 항공중력데이터를 이용하여 각 수준점에서의 중력값을 산출한 뒤 수준점에서의 정표고를 산출하고 현재 우리나라에서 사용하고 있는 고시 좌표와 비교해보았다.

무중력 환경에서 추진기관의 문제점 및 연구 동향 (The Study Trend and Problems of Propulsion System in a Zero-gravity Environment)

  • 길경섭;임하영;이경원;조인현
    • 항공우주산업기술동향
    • /
    • 제8권1호
    • /
    • pp.96-103
    • /
    • 2010
  • 발사체의 상단, 궤도선, 우주비행선 등의 추진기관은 불가피하게 무중력 환경에서 작동해야 한다. 이러한 비행체들이 겪는 비행 환경은 일반적인 중력장과 다르기 때문에 이에 대한 많은 연구들이 진행되어 왔다. 무중력 상태에서의 유체의 거동은 부착력, 응집력, 표면장력 등의 비중이 커지기 때문에 중력이 있는 상태에서와 다르게 나타난다. 본 논문에서는 무중력 환경에서 유체의 거동 특성에 대하여 알아보고 이런 유체의 거동 특성이 액체추진기관에 미치는 영향과 문제점에 대해 기술한다. 또한 이 문제점을 해결하기 위해 어떤 연구들이 진행되고 있는지 알아본다.

  • PDF

무중력 환경에서 추진기관의 문제점 및 연구 동향 (The Study Trend and Problems of Propulsion System in a Zero-gravity Environment)

  • 길경섭;임하영;조인현
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.573-576
    • /
    • 2010
  • 발사체의 상단, 궤도선, 우주비행선 등의 추진기관은 불가피하게 무중력 환경에서 작동해야 한다. 이러한 비행체들이 겪는 비행 환경은 일반적인 중력장과 다르기 때문에 이에 대한 많은 연구들이 진행되어 왔다. 무중력 상태에서의 유체의 거동은 부착력, 응집력, 표면장력 등의 비중이 커지기 때문에 중력이 있는 상태에서와 다르게 나타난다. 본 논문에서는 무중력 환경에서 유체의 거동 특성에 대하여 알아보고 이런 유체의 거동 특성이 액체추진기관에 미치는 영향과 문제점에 대해 기술한다. 또한 이 문제점을 해결하기 위해 어떤 연구들이 진행되고 있는지 알아본다.

  • PDF

Development of a Three-Dimensional DNS Code for Study of Clean Agents -Two-Dimensional Simulation of Diluted Nonpremixed Counterflow Flames-

  • Park, Woe Chul;Hamins, A.
    • International Journal of Safety
    • /
    • 제1권1호
    • /
    • pp.18-23
    • /
    • 2002
  • A mixture fraction formulation is used to numerically simulate the structure of diluted axisymmetric methane-air nonpremixed counterflow flames. The effects of global strain rate and gravity wert! investigated and results were compared. Fuel of a mixture of 20% methane and 80% nitrogen by volume and oxidizer of pure air at low and moderate global strain rates $a_g= 20, 40, 80 s^{-1}$ in normal and zero gravity were computed. It is shown that the numerical method is capable of predicting the structure of counterflow flames in normal and microgravity environments at low and moderate global strain rates.

소나무 압축응력재(壓縮應力材)의 동(動) 탄성율(彈性率)과 내부마찰(內部摩擦) (Dynamic MOE and Internal Friction of Compression Woods in Pinus densiflora)

  • 홍병화;변희섭
    • Journal of the Korean Wood Science and Technology
    • /
    • 제23권2호
    • /
    • pp.32-36
    • /
    • 1995
  • A study was conducted to evaluate the dynamic mechanical properties (modulus of elasticity, resonant frequency and interanal friction) of compression wood in Pinus densiflora. Vibration method was used for estimation of dynamic modulus of elasticity and the values were compared to those of static bending modulus of elasticity. The results obtained are as follows: 1. The dynamic modulus of elasticity of compression wood decreased, whereas that of normal wood increased, with increasing specific gravity. 2. The resonant frequency of compression wood decreased, whereas that of normal wood increased, with increasing specific gravity. 3. The internal friction of compression wood increased with increasing specific gravity. 4. The correlation coefficients between dynamic and static moduli of elasticity in compression and normal woods were high.

  • PDF

고중력에서 MFI 형 Zeolite 인 Silicalite 결정의 합성 및 성장에 관한 연구 (A study on the synthesis and crystal growth of the MFI type zeolite, silicalite under highgravity)

  • 김화중;이준
    • 공업화학
    • /
    • 제2권2호
    • /
    • pp.97-107
    • /
    • 1991
  • 실리카가 많이 함유된 제올라이트 즉 silicalite(end member of ZSM-5)를 2.55 $Na_2O-5.0$ TPABr-100 $SiO_2-2800H_2O $ 조성으로 $180^{\circ}C$에서 7일간 반응시켜 합성하였다. Silicalite 합성을 위한 최초 반웅물들이 담겨진 autoclave들은 반응기간 중 고중력장을 얻기 위하여 특수제작된 열풍식 항온조 내에서 원심분리되었다. 반응은 1, 30 및 50G에서 수행되었다. 30 및 50G의 고중력하에서 합성된 silicalite의 평균 및 최대 결정크기는 동일 조건하의 1G에서 합성된 결정들보다 현저하게 증가되었고, 수율도 4 %에서 55 %정도까지 약 11배가 증가되었다. 1G에서 얻어진silicalite 결정의 평균크기는 1 일에서 7 일에 걸친 전 반응기간을 통하여 $50-70{\mu}m$에 불과한 반면, 30 및 50G에서 얻어진 결정의 평균크기는 $160-190{\mu}m$로 2-3배 증가된 결과가 나타났다. 더욱 특이할만한 현상으로 고중력하에서는 핵심생성과 결정성장이 뚜렷하게 2 단계에 걸쳐 나타남이 관측되었다. 예로써 50G하에서는 단지 2 내지 3 일간의 반응 후에 평균 $135\mu}m$ 정도의 silicalite 결정이 생성되는 비교적 빠른 제 1 성장단계(first growing stage)를 보였고, 이어 5일에 이르기까지 평균 $200{\mu}m$ 정도의 결정이 되는 매우 빠른 제 2 성장단계(second growing stage)가 관찰되었다. 위의 2 단계 결정성장과정에서 얻어진 최대결정 크기는 각각 190 및 $300{\mu}m$이었다. 고중력이 결정핵 생성, 성장, 수율 및 silicalite 결정의 크기에 미치는 영향들에 관하여 자세히 논의하였다.

  • PDF

편마비환자의 중력선 이동에 따른 역학적 분석 (Biomechanical Analysis on the Shift of Gravity Line in Hemiplegic Patients)

  • 이혜영;정동훈;박래준;김진상
    • The Journal of Korean Physical Therapy
    • /
    • 제11권1호
    • /
    • pp.63-70
    • /
    • 1999
  • This study was for mathematical method of calculating the joint reaction force during on single - leg stance on a normal and hemiplegic patients. It is important to compare the distance of the line of gravity from the hip joint on hemiplegic patients with this on normal in this study. In earlier studies, there is no include the concept about biomechanical analysis on the shin of line of gravity of hemiplegic patients. Though this concept, we found the compensation make the line of gravity closer to the supporting hip joint and the trunk was toward the side of paralysis. The result of the Joint reaction force on hemiplegic patients is found to be approximately $31.33\%$ in the unaffected side by biomechanical analysis.

  • PDF

Effect of the Gravity Forces on Flow Pattern and Frictional Pressure Drop in Two-Phase, Two-Component Flow

  • Choi, B.-H;Han, W.-H
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권2호
    • /
    • pp.338-346
    • /
    • 2004
  • Experimental data on the effect of the variable gravity magnitude, namely microgravity, normal gravity and hyper-gravity, on flow pattern and frictional pressure drop were obtained during co-current air-water flow in a horizontal tube, The flow patterns were found to depend strongly on the gravity magnitude and certain flow pattern were found to depend on the gas superficial velocity. The effect of the gravity magnitude had an effect on the frictional pressure drop only at low flow rates. The present data are used to evaluate some of existing flow pattern transition and pressure drop models and correlations.