• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 춘계학술대회 논문집
• /
• pp.116-119
• /
• 1994

The characteristics of the Si-SiO$_2$ interface and the degradation in the short channel(L${\times}$W=1.7$\mu\textrm{m}$${\times}$15$\mu\textrm{m}$) SONOSFET nonvolatile memory devices, fabricated on the basis of the existing n-well CMOS processing technology for 1 Mbit DRAM with the 1.2$\mu\textrm{m}$ m design rule, were investigated using the charge pumping method. The SONOSFET memories have the tripple insulated-gate consisting of 30${\AA}$ tunneling oxide 205${\AA}$ nitride and 65${\AA}$ blocking oxide, The acceleration method which square voltage pulses of t$\_$p/=10msec, Vw=+19V and V$\_$E/=-22V continue to be alternatly applied to gale, was used to investigate the degradation of SONOSFET memories with the write/erase cycle. The degradation characteristics were ascertained by observing the change in the energy and spatial distributions of the interface trap density.

• 한국결정성장학회지
• /
• 제12권6호
• /
• pp.304-310
• /
• 2002

실리콘 기판 위의 초기 산화막을 NO 열처리 및 재산화 공정방법으로 성장한 재산화된 질화산화막을 게이트 유전막으로 사용한 새로운 전하트랠형 기억소자로의 응용가능성과 계면트랩특성을 조사하였다. 0.35$\mu$m CMOS 공정기술을 사용하여 게이트 유전막은 초기산화막을 $800^{\circ}C$에서 습식 산화하였다 전하트랩영역인 질화막 층을 형성하기 위해 $800^{\circ}C$에서 30분간 NO 열처리를 한 후 터널 산화막을 만들기 위해 $850^{\circ}C$에서 습식 산화방법으로 재산화하였다. 프로그램은 11 V, 500$\mu$s으로 소거는 -l3 V, 1 ms의 조건에서 프로그래밍이 가능하였으며, 최대 기억창은 2.28 V이었다. 또한 11 V, 1 ms와 -l3 V, 1 ms로 프로그램과 소거시 각각 20년 이상과 28시간의 기억유지특성을 보였으며 $3 \times 10^3$회 정도의 전기적 내구성을 나타내었다. 단일접합 전하펌핑 방법으로 소자의 계면트랩 밀도와 기억트랩 밀도의 공간적 분포를 구하였다. 초기상태에서 채널 중심 부근의 계면트랩 및 기억트랩 밀도는 각각 $4.5 \times 10^{10}/{cm}^2$ 와 $3.7\times 10^{1R}/{cm}^3$ 이었다. $1 \times 10^3$프로그램/소거 반복 후, 계면트랩은 $2.3\times 10^{12}/{cm}^2$으로 증가하였으며, 기억트랩에 기억된 전하량은 감소하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.408-408
• /
• 2012

It is well known that magnetic random access memory (MRAM) is nonvolatile memory devices using ferromagnetic materials. MRAM has the merits such as fast access time, unlimited read/write endurance and nonvolatility. Although DRAM has many advantages containing high storage density, fast access time and low power consumption, it becomes volatile when the power is turned off. Owing to the attractive advantages of MRAM, MRAM is being spotlighted as an alternative device in the future. MRAM consists of magnetic tunnel junction (MTJ) stack and complementary metal- oxide semiconductor (CMOS). MTJ stacks are composed of various magnetic materials. FePt thin films are used as a pinned layer of MTJ stack. Up to date, an inductively coupled plasma reactive ion etching (ICPRIE) method of MTJ stacks showed better results in terms of etch rate and etch profile than any other methods such as ion milling, chemical assisted ion etching (CAIE), reactive ion etching (RIE). In order to improve etch profiles without redepositon, a better etching process of MTJ stack needs to be developed by using different etch gases and etch parameters. In this research, influences of $O_2$ gas on the etching characteristics of FePt thin films were investigated. FePt thin films were etched using ICPRIE in $CH_4/O_2/Ar$ gas mix. The etch rate and the etch selectivity were investigated in various $O_2$ concentrations. The etch profiles were studied in varying etch parameters such as coil rf power, dc-bias voltage, and gas pressure. TiN was employed as a hard mask. For observation etch profiles, field emission scanning electron microscopy (FESEM) was used.

• 한국재료학회지
• /
• 제27권11호
• /
• pp.590-596
• /
• 2017

We demonstrated a CNT synaptic transistor by integrating 6,6-phenyl-C61 butyric acid methyl ester(PCBM) molecules as charge storage molecules in a polyimide(PI) dielectric layer with carbon nanotubes(CNTs) for the transistor channel. Specifically, we fabricated and compared three different kinds of CNT-based synaptic transistors: a control device with $Al_2O_3/PI$, a single PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%), and a double PCBM device with $Al_2O_3/PI:PCBM$(0.1 wt%)/PI:PCBM(0.05 wt%). Statistically, essential device parameters such as Off and On currents, On/Off ratio, device yield, and long-term retention stability for the three kinds of transistor devices were extracted and compared. Notably, the double PCBM device exhibited the most excellent memory transistor behavior. Pulse response properties with postsynaptic dynamic current were also evaluated. Among all of the testing devices, double PCBM device consumed such low power for stand-by and its peak current ratio was so large that the postsynaptic current was also reliably and repeatedly generated. Postsynaptic hole currents through the CNT channel can be generated by electrons trapped in the PCBM molecules and last for a relatively short time(~ hundreds of msec). Under one certain testing configuration, the electrons trapped in the PCBM can also be preserved in a nonvolatile manner for a long-term period. Its integrated platform with extremely low stand-by power should pave a promising road toward next-generation neuromorphic systems, which would emulate the brain power of 20 W.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 춘계학술회의 초록집
• /
• pp.21-21
• /
• 2010

(Ba,Sr)$TiO_3$ (BST) thin film with a perovskite structure has potential for the practical application in various functional devices such as nonvolatile-memory components, capacitor, gate insulator of thin-film transistors, and electro-optic devices for display. Normally, the BST thin films derived from sol-gel and sputtering are amorphous or partially crystalline when processed below $600^{\circ}C$. For the purpose of integrating BST thin film directly into a Si-based read-out integrated circuit (ROIC), it is necessary to process the BST film below $400^{\circ}C$. The microstructural and electrical properties of low-temperature crystallized BST film were studied. The BST thin films have been fabricated at $350^{\circ}C$ by UV-assisted rapidly thermal annealing (RTA). The BST films are in a single perovskite phase and have well-defined electrical properties such as high dielectric constant, low dielectric loss, low leakage current density, and high breakdown voltage. Photoexcitation of the organics contained in the sol-gel-derived films by high-intensity UV irradiation facilitates elimination of the organics and formation of the single-crystalline phase films at low temperatures. The amorphous BST thin film was transformed to a highly (h00)-oriented perovskite structure by high oxygen pressure processing (HOPP) at as low as $350^{\circ}C$. The dielectric properties of BST film were comparable to (or even better than) those of the conventionally processed BST films prepared by sputtering or post-annealing at temperature above $600^{\circ}C$. When external pressure was applied to the well-known contractive BST system during annealing, the nucleation energy barrier was reduced; correspondingly, the crystallization temperature decreased. The UV-assisted RTA and HOPP, as compatible with existing MOS technology, let the BST films be integrated into radio-frequency circuit and mixed-signal integrated circuit below the critical temperature of $400^{\circ}C$.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.134-134
• /
• 2011

High-k dielectric materials such as $HfO_2$, $ZrO_2$ and $Al_2O_3$ increase gate capacitance and reduce gate leakage current in MOSFET structures. This behavior suggests that high-k materials will be promise candidates to substitute as a tunnel barrier. Furthermore, stack structure of low-k and high-k tunnel barrier named variable oxide thickness (VARIOT) is more efficient.[1] In this study, we fabricated the $WSi_2$ nanocrystals nonvolatile memory device with $SiO_2/HfO_2/Al_2O_3$ tunnel layer. The $WSi_2$ nano-floating gate capacitors were fabricated on p-type Si (100) wafers. After wafer cleaning, the phosphorus in-situ doped poly-Si layer with a thickness of 100 nm was deposited on isolated active region to confine source and drain. Then, on the gate region defined by using reactive ion etching, the barrier engineered multi-stack tunnel layers of $SiO_2/HfO_2/Al_2O_3$ (2 nm/1 nm/3 nm) were deposited the gate region on Si substrate by using atomic layer deposition. To fabricate $WSi_2$ nanocrystals, the ultrathin $WSi_2$ film with a thickness of 3-4 nm was deposited on the multi-stack tunnel layer by using direct current magnetron sputtering system [2]. Subsequently, the first post annealing process was carried out at $900^{\circ}C$ for 1 min by using rapid thermal annealing system in nitrogen gas ambient. The 15-nm-thick $SiO_2$ control layer was deposited by using ultra-high vacuum magnetron sputtering. For $SiO_2$ layer density, the second post annealing process was carried out at $900^{\circ}C$ for 30 seconds by using rapid thermal annealing system in nitrogen gas ambient. The aluminum gate electrodes of 200-nm thickness were formed by thermal evaporation. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer with HP 41501A pulse generator, an Agillent 81104A 80MHz pulse/pattern generator and an Agillent E5250A low leakage switch mainframe. We will discuss the electrical properties for application next generation non-volatile memory device.

• 대한전자공학회논문지
• /
• 제26권7호
• /
• pp.83-89
• /
• 1989

강유전성 $PbTiO_3$ 박막을 rf스터링으로 기판온도 $100{\sim}150^{\circ}C$에서 형성시켰다. 이 박막의 구조는 X선 회절결과 비정질 형태로 파이로클로어 구조를 갖고 있었다. 이 박막을 열에 의해 어닐링한 경우는 $550^{\circ}C$에서, 레이저의 주사로 어닐링한 경우는 레이저 출력이 50watts일때 가장 우수한 결정 구조를 구할 수 있었다. 집합에서의 계면 특성을 구하기 위하여 MFS(metal-ferroelectric-semiconductor)및 MFOS(metal-ferroelectric-oxide-semiconductor) 구조를 형성하여 C-V특성을 조사하였다. 이때 MFS보다 MFOS의 경우가 Si표면에 sputter에 의한 결함이 작음을 알 수 있었다.

• Journal of Ceramic Processing Research
• /
• 제20권5호
• /
• pp.484-489
• /
• 2019

VO2 is an attractive candidate as a transition metal oxide switching material as a selection device for reduction of sneak-path current. We demonstrate deposition of nanoscale VO2 thin films via thermal atomic layer deposition (ALD) with H2O reactant. Using this method, we demonstrate VO2 thin films with high-quality characteristics, including crystallinity, reproducibility using X-ray diffraction, and X-ray photoelectron spectroscopy measurement. We also present a method that can increase uniformity and thin film quality by splitting the pulse cycle into two using scanning electron microscope measurement. We demonstrate an ON / OFF ratio of about 40, which is caused by metal insulator transition (MIT) of VO2 thin film. ALD-deposited VO2 films with high film uniformity can be applied to next-generation nonvolatile memory devices with high density due to their metal-insulator transition characteristic with high current density, fast switching speed, and high ON / OFF ratio.

• 전자공학회논문지D
• /
• 제36D권11호
• /
• pp.63-70
• /
• 1999

PLT(10) 박막을 $Pt/TiO_2/SiO_2/Si$ 기판 위에 sol-gel법으로 제작하여, 상부전극의 면적과 외부인가 펄스전압 및 부하저항을 변화시켜 가며 비휘발성 메모리 소자에 응용하기 위해 필수적인 switching 특성을 조사하였다. 외부인가 펄스전압이 2V에서 5V 까지 증가함에 따라, switching time은 $0.49{\mu}s$에서 $0.12{\mu}s$로 감소하였으며, 인가된 펄스전압에 대한 switching time의 관계로부터 구한 활성화 에너지 ($E_a$)는 209 kV/cm이었다. 상부전극 면적이 $3.14{\times}10^{-4}cm^2$인 박막에서 이력곡선과 polarization switching 실험으로부터 구한 switched charge density는 5V에서 각각 $11.69{\mu}C/cm^2$과 $13.02{\mu}C/cm^2$으로 양쪽 값 사이의 오차는 약 10%로 비교적 잘 일치하는 경향을 나타내었다. 상부전극의 면적이 $3.14{\times}10^{-4}cm^2$에서 $5.03{\times}10^{-3}cm^2$으로 증가함에 따라, switching time이 $0.12{\mu}s$에서 $1.88{\mu}s$로 증가하였으며, 부하저항을 50${\Omega}$에서 3.3$k{\Omega}$으로 증가시킴에 따라 switching time은 $0.12{\mu}s$에서 $9.7{\mu}s$로 증가로 증가하였다. 이와 같은 switching 특성에 관한 연구를 통해 PLT(10) 박막이 비휘발성 메모리 소자에 응용될 수 있는 매우 유망한 재료임을 알 수 있다.