• 혜화의학회지
• /
• 제10권1호
• /
• pp.365-374
• /
• 2001

The brain is one of the most complex systems in nature. Brain waves, or the "EEG", are electrical signals that can be recorded from the brain, either directly or through the scalp. The kind of brain wave recorded depends on the behavior of the animal, and is the visible evidence of the kind of neuronal (brain cell) processing necessary for that behavior. But, EEG had been considered as a virtually infinite-dimensional random signal. However, nonlinear dynamics light on dynamical aspects of the human EEG. The methods of nonlinear dynamics provide excellent tolls for the study of multi-variable, complex system such as EEG. In this study, 20 persons seperated in 2 groups were examined with EEG, one group stimulated on specific area of the sole of the foot with footbed inside the shoes. This experiment resulted in at the group stimulated on specific area of the sole of the foot correlation dimension of P4 and O1 channels increased significantly. Therefore. we obserbed that stimulation on specific area of the body had a constant effections on the specific channels.

• International Journal of Aeronautical and Space Sciences
• /
• 제13권3호
• /
• pp.349-360
• /
• 2012

In this study, the accuracy of CSD (Comprehensive Structural Dynamics) analysis on the evaluation of blade aeroelastic responses and structural loads of HART(Higher harmonic Aeroacoustic Rotor Test) II baseline rotor is assessed using a comprehensive rotorcraft dynamics code, CAMRAD II, and a nonlinear flexible multi-body dynamics analysis code, DYMORE. Considering insufficient measurement data for HART II rotor, prescribed airloads computed by a three-dimensional compressible flow solver KFLOW are used to replace the lifting-line airloads and thereby enhance the prediction capability of the comprehensive analyses. The CSD results on blade elastic deflections using the prescribed airloads indicate more oscillatory behavior than those by lifting-line based approaches, but the wave pattern becomes improved by including artificial damping into the rotor system. It is demonstrated that the structural load predictions are improved significantly by the prescribed airloads approach against the measured data, as compared with an isolated CSD analysis.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1324-1331
• /
• 2003

A bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is essentially a hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. The shaft is connected to the suspension and the sleeve is connected to the frame. The cylinder provides the cushion when it deforms due to relative motion between the shaft and sleeve. The relation between the force applied to the shaft or sleeve and its deformation is nonlinear and exhibits features of viscoelasticity. An explicit force-displacement relation has been introduced for multi-body dynamics simulations. The relation is expressed in terms of a force relaxation function and a method of determination by experiments on bushings has been developed. Solutions allow for comparison between the force-displacement behavior by experiments and that predicted by the proposed method. It is shown that the predictions by the proposed force-displacement relation are in very good agreement with the experimental results.

• 한국자동차공학회논문집
• /
• 제7권5호
• /
• pp.154-161
• /
• 1999

An elastomeric bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer suface. The relation between the force applied to the shaft or sleeve and their relative deformation is nolinear and exhibits features of viscoelasticity. Numerical solutions of the boundary value problem represent the exact bushing response for use in the method for determining the force relaxation function of the bushing. The new nonlinear viscoelastic bushing model, which is called Pipkin-Rogers model, is proposed and it is shown that the predictions of the proposed force-displacement relation are in very good agreement with the exact results. This new bushing model is thus very suitable for use in multi-body dynamics codes. The success of the present study for axial mode response suggests that the same approach be applied to other modes, such as torsional or radial modes.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.1-7
• /
• 2010

The paper proposes a multi-body dynamic simulation to numerically evaluate the generated axial force(G.A.F) and plunging resistant force(P.R.F) practically related to the shudder and idling vibration of an automobile. A numerical analysis of two plunging types of CV joints, tripod joint(TJ) and very low axial tripod joint(VTJ), is conducted using the commercial program DAFUL. User-defined subroutines of a friction model illustrating the contacted parts of the outboard and inboard joint are subsequently developed to overcome the numerical instability and improve the solution performance. The Coulomb friction effect is applied to describe the contact models of the lubricated parts in the rolling and sliding mechanisms. The numerical results, in accordance with the joint articulation angle variation, are validated with experimentation. The offset between spider and tulip housing is demonstrated to be the critical role in producing the 3rd order component of the axial force that potentially causes the noise and vibration in vehicle. The VTJ shows an excellent behavior for the shudder when compared with TJ. In addition, a flexible nonlinear contact analysis coupled with rigid multi-body dynamics is also performed to show the dynamic strength characteristics of the rollers, housing, and spider.

• 한국소음진동공학회논문집
• /
• 제17권10호
• /
• pp.907-911
• /
• 2007

Compliance of joints must be considered when we analyze dynamics of a multi-body system. If the virtual model for CAE(computer aided engineering) analysis does not consider compliance, the result of CAE analysis can be very different from the actual experimental result. Especially in a biped walking robot, the robot may lose walking stability due to the compliance in joints of a walking robot. This paper proposed a method applying a compliance of joints in the biped walking robot to a virtual model. Also, through the 3-D displacement measurement using a laser tracker, it was demonstrated that the virtual model considering the joint compliance could effectively simulate the nonlinear motion of the real model.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.40-50
• /
• 2005

본 논문에서는 이중 로터 풍력 발전 시스템에 대한 모델링 및 성능 예측 결과를 제시하였다. 공력 모델은 블레이드 요소 및 모멘텀 이론에 근거하였으며, 시스템 동역학 모델은 다몸체 역학을 적용하였다. 이중 로터 풍력 발전 시스템의 정상 상태는 물론 이중 여자 유도 발전기를 탑재한 발전 시스템에 대하여 풍속 변화에 따른 과도 응답을 분석하였고, 로터 회전수 및 발전 출력 제어를 위하여 주 및 보조 로터의 피치각 제어 전략의 도출 및 비선형 시뮬레이션 결과를 제시하였다.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.496-502
• /
• 2007

본 논문에서는 비선형적 다물체 시스템의 유한요소 해석프로그램인 DYMORE의 새로운 버전을 이용하여 압전 재료(piezoelectric)를 삽입한 능동 비틀림 로터(Active Twist Rotor)의 개별 블레이드 제어(Individual Blade Control)에 의한 로터 블레이드의 진동 감소 효과를 해석하고 이를 풍동실험 및 이전 버전의 DYMORE 결과와 비교하였다. 본 연구에서는 로터 허브와 네 개의 블레이드만으로 구성된 단순한 로터시스템과 스워시 판, 피치링크 등을 모두 포함하는 개선된 로터시스템에 대한 해석이 각각 수행되었다. 사용된 실험 결과 자료들은 NASA Langley의 Transonic Dynamics Tunnel(TDT)에서 수행되었던 결과들을 사용하였다. 그 결과 새로운 버전의 DYMORE를 이용한 경우 실험값과는 여전히 차이가 있지만 이전 버전의 DYMORE를 통해 얻어진 수치해석 결과에 비해서 오차가 개선되는 것을 확인할 수 있었다. 또한 개별 블레이드 제어 방식의 로터 시스템의 모델링을 수행하고 전진 비행 시의 진동 하중 감소 효과를 확인하였다.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1678-1683
• /
• 2001

The mobility of tracked vehicles is mainly influenced by the interaction between tracks and soil, so that the characteristics of their interactions are quite important fur the tracked vehicle study. In particular, the track tension is closely related to the maneuverability of tracked vehicles and the durability of tracks and suspension systems. In order to minimize the excessive load on the tracks and to prevent the peal-off of tracks from the road-wheels, the Dynamic Track Tensioning System (DTTS) which maintains the optimum track tension throughout the maneuver is required. It consists of track tension monitoring system, track tension controller and hydraulic system. In this paper, a dynamic track tensioning system is developed for tracked vehicles which are subject to various maneuvering tasks. The track tension is estimated based on the idler assembly model. Using the monitored track tension and con sidering the highly nonlinear hydraulic units, fuzzy logic controllers are designed in order to control the track tension. The track tensioning performance of the proposed DTTS is verified through the simulation of the Multi -body Dynamics tool.

• 한국전산구조공학회논문집
• /
• 제26권4호
• /
• pp.247-254
• /
• 2013

본 논문에서는 해상 시추작업을 위한 heave compensation system의 시뮬레이션 모델을 개발하였다. 우선 시뮬레이션을 위하여, 다물체계 동역학 커널을 개발하였다. 다물체계 동역학 커널은 입력 받은 heave compensation system 시뮬레이션 모델의 운동학적 정보를 이용하여 recursive Newton-Euler formulation 방법을 기반으로 운동방정식을 자동으로 구성하고, 수치적으로 해를 계산하는 기능을 한다. 그리고 해상 시추선에 작용하는 외력을 계산하기 위하여 유체 정역학적 힘과 유체 동역학적 힘을 계산하는 모듈을 개발하였다. 이와 같이 개발한 커널과 모듈들을 적용하여 해상 시추선의 hoisting system 동적거동 해석을 수행하고, 관절에서의 구속력을 계산하였다.