• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.294-297
• /
• 2003

This paper describes the design and the simulation of a frequency doubler for millimeter-wave applications using distributed amplifier technology. The designed frequency multiplier has 10% bandwidth at 58GHz output. This paper investigates nonlinear analysis of pHEMT frequency multipliers utilizing AM-AM and AM-PM distortion characteristics of frequency doubler. The conversion loss is 2.1dB and harmonic suppression is larger than 18.6dBc with 5dBm input power

• ETRI Journal
• /
• v.39 no.6
• /
• pp.771-781
• /
• 2017

For efficient spectral utilization of satellite channels, a shared band transmission technique is introduced in this paper. A satellite transmits multiple received signals from a gateway and terminal in the common frequency band by superimposing the signals. To improve the power efficiency as well as the spectral efficiency, a travelling wave tube amplifier in the satellite should operate near the saturation level. This causes a nonlinear distortion of the superimposed transmit signal. Without mitigating this nonlinear effect, the self-interference cannot be properly cancelled and the desired signal cannot be demodulated. Therefore, an adaptive compensation scheme for nonlinearity is herein proposed with the proper operation scenario. It is shown through simulations that the proposed shared band transmission approach with nonlinear compensation and self-interference cancellation can achieve an acceptable system performance in nonlinear satellite channels.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.5A
• /
• pp.316-322
• /
• 2003

We theoretically analyze the properties of nonlinear distortion due to modulation instability (MI), which is a major factor of performance degradation in optical amplified transmission systems, and propose an optical link structure to compensate MI based on the analysis. The proposed MI compensating link structure is composed of optical phase conjugators (OPCs) and dispersion compensating fibers (DCFs) in order to suppress nonlinear effects in optical transmission links. It has been confirmed through computer simulations that the performance of the proposed compensation scheme is superior to that of conventional compensation schemes for 500 km transmission.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.40-52
• /
• 1997

It has been known that the OFDM-based terrestrial broadcasting systems are significantly more sensitive to nonlinear distortion in high-power amplifiers (HPA's) than the broadcasting systems using single-carrier modulation technique. In this paper, an adaptive precompensator which can compensate the nonlinear effect of the HPA for OEDM systems is proposed. The proposed precompensator consists of a compensation table, realized by memory (RAM), and an adaptive algorithm which can update the values of the compensation table more efficiently using a

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.660-668
• /
• 1994

In this paper, a new approach to estimate nonmlinear distortions (second-harmonic, second-intermodulation, third-harmonic, and third-intermodulation) in digital communication systems is proposed. In contrast to the relatively common sine-wave input approach which requires repetition of the same experiments by changing frequencies of oscillators and filters over the band of frequencies of interest, the proposed approach uses digital random input (transmitted signal in digital communication system) to adaptively estimate parameters of a nonlinear channel in time-domain. Nonlinear distortion of the channel is estimated on line by transforming the estimated parameters into frequency-domain. Comparison between the classical two-tone input approach and the proposed approach is made through computer simulation.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.115-119
• /
• 2017

Intermodulation distortion degrades the S/N(signal-to-noise) of the original signal and also affects the adjacent channels. Intermodulation distortion is mainly caused by the nonlinear characteristics of the power amplifier. If the power amplifier with nonlinear characteristics has a memory effect, the intermodulation distortions occurred in the power amplifier are generated in various and complex forms. The predistorter is used as a way to improve intermodulation distortions. In order to efficiently utilize the performance of the predistorter, the memory effect of the power amplifier must be reduced. In this paper, we describe the design method of bias circuit to reduce the memory effect in power amplifiers. To reduce the memory effect, the bias circuit must have a high impedance for the signal and a low impedance for the envelope(modulating signal) and the second harmonic component of the signal. To verify the performance of the bias circuit designed considering the memory effect, a power amplifier operating at 170 ~ 220MHz was designed and implemented. The designed bias circuit has a large impedance in the operating frequency band and low impedance in the envelope signal and the second harmonic of the signal. As a result of the performance measurement, it was found that the asymmetric intermodulation distortion component is improved by 3.7dB.

• The KIPS Transactions:PartA
• /
• v.13A no.5 s.102
• /
• pp.429-434
• /
• 2006

A CCTV system reduces some number of cameras if we use convex-mirror. In this case, convex-mirror Image distorted, we need transformation to flat images. In the center of mirror images, a transformed image has no distortion, but at near boundary image has plentiful distortion. This distortion is caused by occlusion of angled ray and diffraction. We know that the linear filtering approach cannot separate noise from signal where their Fourier spectra overlap. But using a non-linear discretization method, we shall reduce blurred noise. In this paper, we introduce the backward solution of nonlinear wave equation for reducing blurred noise and biased expansion of equilibrium contour. We propose, after applying the introduced method, and calculate with discretization method. To analysis the experimental result, we investigate to PSNR and get about 4dB better than current method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.827-833
• /
• 2012

The receiver performance is degraded by nonlinear memory problem in communication system. The pre-distorter techniques are an effective technique to compensate for the nonlinear distortion of the HPA without memory effects. However, memory effect of HPA can no longer be ignored when data signal is transmitted in high speed. Many adaptive pre-distorter schemes have been studied to compensate for memory effect problem of HPA in transmitter. The complexity and cost of satellite will increase when using adaptive pre-distorter in satellite communication system. In this paper, we propose receiver feedback closed loop pre-distortion technique in order to compensate for nonlinear problem of HPA with memory problem. The purpose of this paper is to reduce complexity and cost of satellite design by using only pre-distorter at terrestrial station.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2261-2266
• /
• 2009

A novel adaptive phase calibration method is proposed for nonlinear amplifiers. Based on the adaptive process of simple phase vector calculations, the AM/PM distortion can be significantly reduced for various input power. The performance of the proposed method is evaluated for up to 80 % improvements in AM/PM distortions, compared with the distortion of a conventional amplifier. Moreover, by means of an additional envelope-compensation technique, the improvement of the adjacent channel power ratio (ACPR) is presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1262-1270
• /
• 2007

In this paper, we propose a new distortion cancellation mechanism for a balanced power amplifier structure using the carrier cancellation loop of a feedforward and post-distortion technique. The proposed cross post-distortion balanced linear amplifier can reduce nonlinear components as much as the conventional feedforward amplifier through the output dynamic range and broad bandwidth. Also the proposed system provides higher efficiency than the feedforward. The capacities of power amplifier and error power amplifier in the proposed system are analyzed and compared with those of feedforward amplifier. Also the operation mechanisms of the three kind loops are explained. The proposed cross post-distortion balanced linear power amplifier is implemented at the IMT-2000($f_0=2.14\;GHz$) band. With the commercial high power amplifiers of total power of 240 W peak envelope power fer base-station application, the adjacent channel leakage ratio measurement with wideband code division multiple access 4FA signal shows 18.6 dB improvement at an average output power of 40 dBm. The efficiency of fabricated amplifier Improves about 2 % than the conventional feedforward amplifier.