• 제목/요약/키워드: Nonionic polymer

검색결과 41건 처리시간 0.022초

Effect of Reaction Conditions on the Preparation of Nano-sized Ni Powders inside a Nonionic Polymer

  • Kim, Tea-Wan;Kim, Dong-Hyun;Park, Hong-Chae;Yoon, Seog-Young
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.462-463
    • /
    • 2006
  • Monodispersed and nano-sized Ni powders were synthesized from aqueous nickel sulfate hexahydrate $(NiSO_4{\cdot}6H_2O)$ inside nonionic polymer network by using wet chemical reduction process. The sucrose was used as a nonionic polymer network source. The effect of reaction conditions such as the amount of sucrose and a various reaction temperature, nickel sulfate hexahydrate molarity. The influence of a nonionic polymer network on the particle size of the prepared Ni powders was characterized by means of X-ray diffraction (XRD), scanning electron microscopy (SEM), and particle size analysis (PSA). The results showed that the obtained Ni powders were strong by dependent of the reaction conditions. In particular, the Ni powders prepared inside a nonionic polymer network had smooth spherical shape and narrow particle size distribution.

  • PDF

서방정으로부터의 약물 용출에 대한 고분자-약물 상호작용의 영향 (Effects of Polymer-Drug Interactions on Drug Release from Sustained Release Tablets)

  • 김행자;이승진
    • Journal of Pharmaceutical Investigation
    • /
    • 제26권2호
    • /
    • pp.119-124
    • /
    • 1996
  • To develop oral controlled release dosage forms, ionic interactions between polymers and drugs were evaluated. Hydroxypropylmethyl cellulose and carboxymethylene were used as model nonionic and ionic polymers, respectively. 5-fluorouracil, propranolol-HCl and sodium salicylate were selected as model nonionic, cationic and anionic, respectively. Polymer-drug mixtures were compressed into tablets and drug release kinetics from these tablets were determined. Drug release from the tablets made of the nonionic polymer was not affected by the charge of drugs, rather, was regulated by the solubility of drugs in different pH releasing media. However, drug release kinetics were significantly affected when drug-polymer ionic interactions exist. Enhanced drug release was observed from anionic drug-anionic polymer tablets due to ionic repulsion, whereas drug release was retarded in cationic drug-anionic polymer tablets owing to ionic attractive force. Therefore, the results suggested that the polymer-drug interactions are important factors in designing controlled release dosage forms.

  • PDF

Effect of Surfactants on the Electrochemical Performance of Cation-Selective Membrane Electrodes

  • Oh, Hyun-Joon;Cha, Geun-Sig;Nam, Hak-hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제24권1호
    • /
    • pp.37-44
    • /
    • 2003
  • We examined the effect of polyether-type nonionic surfactants (Brij 35, Triton X-100, Tween 20 and Tween 80) on the potentiometric properties of sodium-, potassium- and calcium-selective membranes which are prepared with widely used ionophores and four kinds of polymer matrices [poly(vinyl chloride) (PVC), polyurethane (PU), PVC/PU blend, and silicone rubber (SR)]. It was found that the PVC-based membranes, which provide the best performance among all other matrix-based membranes in the absence of nonionic surfactants, exhibited larger change in their potentiometric properties when nonionic surfactants are added to the sample solution. On the other hand, the sodium-selective SR-based membrane with calix[4]arene, potassium-selective PVC/PU- or SR-based membrane with valinomycin, and the calcium-selective SR-based membrane with ETH 1001 provide almost identical analytical performance in the presence and absence of Tween 20 or Tween 80 surfactants. The origin of nonionic surfactants effect was also investigated by interpreting the experimental results obtained with various matrices and ionophores. The results suggest that the nonionic surfactant extracted into the membrane phase unselectively form complexes with the primary and interfering ions, resulting in increased background potential and lower binding ability for the ionophore. Such effects should result in deteriorated detection limits, reduced response slopes and lower selectivity for the primary ions.

Immobilization of Alchidine on Polyvinyl Alcohol Gels

  • Soh, Dea-wha
    • Transactions on Electrical and Electronic Materials
    • /
    • 제4권1호
    • /
    • pp.11-14
    • /
    • 2003
  • The regularities of immobilization of natural medicinal substances - alchidine on gels of poly(vinyl alcohol) - are investigated. It is shown that the polymer components of alchidine interact with nonionic polymer with formation of interpolymer complexes. The influence of the different factors on the properties of complexes is considered and the constants of alchidine distribution in the system gel - water are calculated.

Preparation and Characterization of Monodispersed and Nano-sized Cu Powders

  • Kim, Tea-Wan;Lee, Hyang-Mi;Kim, Yong-Yee;Hwang, Kyu-Hong;Park, Hong-Chae;Yoon, Seog-Young
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
    • /
    • pp.464-465
    • /
    • 2006
  • Monodispersed and nano-sized Cu powders were synthesized from copper sulfate pentahydrate $(CuSO_4{\cdot}5H_2O)$ inside a nonionic polymer matrix by using wet chemical reduction process. The sucrose was used as a nonionic polymer network source. The influences of a nonionic polymer matrix on the particle size of the prepared Cu powders were characterized by means of X-ray diffraction), scanning electron microscopy), and particle size analysis). The smallen Cu powders with size of approximately 100 nm was obtained with adding of 0.04M sucrose at reaction temperature of $60\;^{\circ}C$. The particle size of the Cu powders prepared by the reduction inside polymer network was strongly dependent of the sucrose content and reaction temperature.

  • PDF

고전하밀도 양이온성폴리머와 Sodium dodecyl sulfate가 만드는 콤플렉스에 대한 비이온계면활성제의 영향 (The transformation of the complex of high charge density cationic polymer with sodium dodecyl sulfate into vesicles by nonionic surfactant)

  • 이정노;강계홍
    • 한국응용과학기술학회지
    • /
    • 제25권2호
    • /
    • pp.205-210
    • /
    • 2008
  • The transformation of the liquid crystal complex made by binding of anionic surfactant, sodium dodecyl sulfate (SDS), into high charge density cationic polymer, the homopolymer of diallyldimethylammonium chloride (PDADMAC) was induced by adding of nonionic surfactants and investigated by means of microscopy and FE.SEM. Among nonionic surfactants in this experiments polyethylene glycol (3 mol) ether of lauryl alcohol (laureth-3) made variation in the complex. The laureth-3 transformed the complex into spherulite vesicle with the size of ca.$100{\mu}m$. This change increased the viscosity and the turbidity of the solution phase separated originally. Microscope showed that they are spherulite particles and polarized microscope suggested they are multi.lamellar liquid crystals. FE-SEM also proved that explicitly.

Nanofiltration of Electrolytes with Charged Composite Membranes

  • Choi, J.H.;Yeom, C.K.;Lee, J.M.;Suh, D.S.
    • 멤브레인
    • /
    • 제13권1호
    • /
    • pp.29-36
    • /
    • 2003
  • A characterization of the permeation and separation using single salt solution was carried out with charged composite membranes. Various charged composite membranes were fabricated by blending an ionic polymer with a nonionic polymer in different ratios. In this study, sodium alginate, chitosan and poly(vinyl alcohol) were employed as anionic, cationic and nonionic polymers, respectively. The permeation and separation behaviors of the aqueous salt solutions have been investigated through the charged composite membranes with various charge densities. As the content of the ionic polymer increased in the membrane, the hydrophilicity of the membrane increased, and pure water flux and the solution flux increased correspondingly, indicating that the permeation performance through the membrane is determined mainly by its hydrophilicity. Electrostatic interaction between the charged membrane and ionic solute molecules, that is, Donnan exclusion, was observed to be attributed to salt rejection to a greater extent, and molecular sieve mechanism was effective for the separation of salts under a similar electrostatic circumstance of solutes.

환경친화적 LE-형 비이온계면활성제를 사용한 반연속식 말브틸-아크릴레이트/메틸메타-아크릴레이트 유화중합에 관한 연구 (Semi-continuous Emulsion Polymerization of n-Butyl acrylate/Methyl metacrylate using Environmental-Friendly LE-Type Nonionic Surfactant)

  • 김철웅
    • 청정기술
    • /
    • 제11권1호
    • /
    • pp.41-50
    • /
    • 2005
  • 본 연구는 환경친화적인 선형 비이온 계면활성제인 LE-형유화제를 사용하여 점착성분의 단량체로 노말부틸 아크릴레이트 (n-butyl acrylate, n-BA)와 응집성분의 단량체로 메틸메타 아크릴레이트 (methyl metacrylate, MMA)를 사용하여, 폴리머 시멘트용 아크릴계 에멀젼 수지를 제조하기 한 최적조건을 얻기 위해 수용액상에서 유화중합을 실시하였다. 실험결과, 사용한 계면활성제 (LE-형)의 친수성인 체인 길이(n)의 값이 증가할수록 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최종 폴리머 에멀젼의 농도는 이 계면활성제의 사용량을 증가시킴에 따라 증가하다가 어느 농도 이상에서 응석의 발생이 거의 없는 폴리머 에멀젼을 얻을 수 있었으며, 반면에 평균 입자크기도 사용량에 따라 작아지다가 250 nm로 일정한 크기를 나타내었다. 또한 기능성 폴리머로서 보조모노머의 첨가는 최종 폴리머 에멀젼의 응석과 입자크기에 크게 영향을 미쳤는데, 주 모노머에 보조 모노머인 아크릴산 (acrylic acid, AA)과 아크릴 아마이드 (acrylic amide, AM)의 혼합하여 첨가한 경우, 첨가하지 않은 경우에 비해 응석의 발생이 줄어들어 안정한 폴리머 에멀젼을 얻을 수 있었다. 최적조건에서 어진 아크릴 폴리머 에멀젼은 평균 입자크기 200-300 nm, 제타전위 (zeta potential)값 -50 mv 정도였으며, 단일 유리전이온도 (glass temperature, Tg)를 가진 고분자 나노 입자가 수용액상에 잘 분산되어 있음을 알 수 있었다. 따라서 중합조건을 최적화시켜 안정된 폴리머 에멀젼을 얻을 있었다.

  • PDF

Role of surfactant on damping performance of polyaniline based electrorheological suspension

  • Kim, Ji-Woo;Kim, Chul-Am;Choi, Hyoung-Jin;Choi, Seung-Bok
    • Korea-Australia Rheology Journal
    • /
    • 제18권1호
    • /
    • pp.25-30
    • /
    • 2006
  • To enhance the stability of dispersed polyaniline (PANI) particles in a silicone oil system, a nonionic surfactant was adopted, and its effect on the electrorheological (ER) performance was investigated under an applied electric field. In the presence of a nonionic surfactant, the PANI based ER fluid exhibited not only an improved sedimentation stability based on the estimated sedimentation ratio but also an enhanced maximum yield stress behavior. Furthermore, the surfactant added ER suspension was applied to an ER damper system, and its damping performance was compared with the ER suspension without a surfactant.

폴록사머-폴리아크릴산 IPNs의 약물 조절 방출 (Drug Release Control of Poloxamer-Poly(acrylic acid) Interpenetrating Polymer Networks)

  • 변은정;박주애;이승진;김길수
    • 약학회지
    • /
    • 제41권1호
    • /
    • pp.22-29
    • /
    • 1997
  • Poloxamer-poly (acrylic acid) (PAA) interpenetrating polymer networks (IPNs) were prepared via matrix polymerization of acrylic acid with poloxamer prepolymer. The equilibrium s welling of poloxamer/PAA IPNs was determined in various pH medium. The swelling of poloxamer/PAA IPNs was more affected by pH difference compared with the swelling of homo PAA gel due to protonation and deprotonation of the PAA network, followed by reversible formation and dissociation of the interpolymer complex due to hydrogen bonding between acidic hydrogens and ether oxygens. Nonionic/anionic/cationic drugs were incorporated into IPN matriceds as a model drug and their release behavior was studied. Nonionic, drug revealed release patterns depending solely on pH dependent swelling kinetics. In contrast, the release of ionic drugs was significantly affected by ionic drug-polymer interaction as well as the swelling kinetics.

  • PDF