• Structural Engineering and Mechanics
• /
• 제60권2호
• /
• pp.313-335
• /
• 2016

In this article, a four-variable refined plate theory is presented for buckling analysis of functionally graded plates subjected to uniform, linear and non-linear temperature rises across the thickness direction. The theory accounts for parabolic distribution of the transverse shear strains, and satisfies the zero traction boundary conditions on the surfaces of the plate without using shear correction factor. Young's modulus and Poisson ratio of the FGM plates are assumed to remain constant throughout the entire plate. However, the coefficient of thermal expansion of the FGM plate varies according to a power law form through the thickness coordinate. Equilibrium and stability equations are derived based on the present theory. The influences of many plate parameters on buckling temperature difference such ratio of thermal expansion, aspect ratio, side-to-thickness ratio and gradient index will be investigated.

• Structural Engineering and Mechanics
• /
• 제48권3호
• /
• pp.415-434
• /
• 2013

This work is concerned with transverse vibrations of axially traveling nanobeams including strain gradient and thermal effects. The strain gradient elasticity theory and the temperature field are taken into consideration. A new higher-order differential equation of motion is derived from the variational principle and the corresponding higher-order non-classical boundary conditions including simple, clamped, cantilevered supports and their higher-order "offspring" are established. Effects of strain gradient nanoscale parameter, temperature change, shape parameter and axial traction on the natural frequencies are presented and discussed through some numerical examples. It is concluded that the factors mentioned above significantly influence the dynamic behaviors of an axially traveling nanobeam. In particular, the strain gradient effect tends to induce higher vibration frequencies as compared to an axially traveling macro beams based on the classical vibration theory without strain gradient effect.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권3호
• /
• pp.305-312
• /
• 2024

This field study explores how varying target amounts influence donation behavior using real-world data from the online fundraising platform GoFundMe. We analyzed donation data across four different target amounts and found significant differences in donation patterns. Lower target amounts were found to encourage higher individual donations, while excessively high targets were less effective. The data revealed that donors tend to be more responsive to campaigns with achievable goals, possibly due to a perceived higher impact of their contributions. Conversely, campaigns with unrealistically high targets often struggled to gain traction, suggesting a potential donor deterrent effect. We believe these findings provide practical insights for nonprofits on setting realistic and achievable target amounts to maximize donations. Our study underscores the importance of strategic target setting in enhancing fundraising outcomes. We conclude that this insight has significant implications for how non-profit organizations approach their fundraising strategies, potentially improving the effectiveness of online charitable campaigns.

• 융합정보논문지
• /
• 제9권8호
• /
• pp.140-147
• /
• 2019

본 연구의 목적은 비보이들이 선호하는 기존 신발 5종류를 대상으로 인간공학적 사용성 평가를 통하여 최적신발제작을 위한 생체역학적 변인을 규명하는 것이다. 실험대상자는 전문가 10명, 비전문가 10명이 참가하였고, 자료획득을 위하여 적외선카메라 12대(Qualisys, Oqus), 지면반력기(Kistler, 9286AA)와 족저압력기(Zebris Gmbh, Zebris PDM-System)를 사용하였다. 연구결과는 다음과 같다. 첫째, 접지능력과 안전성 면에서 마찰계수 0.38, 자유모멘트가 $0.32N{\cdot}m/kg$인 P사 신발이 바람직하다. 둘째, 쿠션면에서 충격량이 숙련자, $2.51N{\cdot}m/kg$과 비숙련자, $2.86N{\cdot}m/kg$인 N사 신발이 적절한 것으로 나타났다. 셋째, 보행균형성은 전족부의 평균 족저압력이 10.11 KPa(우측), 10.05 KPa(좌측)인 C사 신발, 후족부의 평균 족저압력이 8.40 KPa(우측), 8.36 KPa(좌측)인 V사 신발 적정하다고 판단된다. 결론적으로 접지능력과 안전성은 P사, 쿠션면은 N사와 보행 균형성은 C사와 V사 신발들의 구조와 재질을 조합한 신발을 개발하여야 한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2365-2372
• /
• 2011

BLDC 모터와 같은 동기전동기에서 소음과 진동의 원인이 되는 코깅토크는 전동기내의 비 균일 토크로서 전동기 시스템의 자기 에너지가 최소인 위치로 이동하려는 접선방향의 힘으로 부하전류와 상관없이 회전자 영구자석과 고정자 슬롯의 상호작용에 의해 발생한다. 이러한 코깅토크는 전동기의 소음과 진동의 주요 원인이 되므로 전동기 설계 시 반드시 고려해야 한다. 코깅토크는 영구자석이 부착된 회전자에 의하여 공극 중에 비교적 저차의 고조파 자속밀도와 고정자 철심 슬롯의 상호작용으로 발생한다는 점을 중시하여 본 논문에서는 실험계획법의 일종인 반응표면 법을 사용하여 코깅토크를 저감하는 방법에 대해 제시하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1832-1837
• /
• 2011

This paper presents the optimal permanent magnet shape on the rotor of an interior permanent magnet motor to reduce the core losses and improve the performance. As permanent magnet has conductivity inherently, it causes huge amount of eddy current losses by the slot harmonics with concentrated winding. This loss is roughly 100 times larger than that of distributed winding in high speed operation and it cannot be ignored, especially on traction motors. Each eddy current loss on permanent magnet has been investigated in detail by using FEM(Finite Element Method) instead of EMCNM(Equivalent Magnetic Circuit Network Method) in order to consider saturation and non-linear magnetic property. Simulation-based DOE(Design Of Experiment) is also applied to avoid large number of analyses according to each design parameter and consider expected interactions among parameters. Consequently, the optimal design to reduce the core loss on the permanent magnet while maintaining or improving motor performance is proposed by an optimization algorithm using regression equation derived and lastly, the core loss reduction on the proposed shape of the permanent magnet is verified by FEM.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.649-654
• /
• 2004

In this paper, the fracture toughness and mechanisms of failure in a random SiC-whisker/$Al_{2}O_3$ ceramic composite were investigated using in situ observations during mode I(opening) loading. $SiC_{w}/Al_{2}O_3$ composite was obtained by hot press sintering of $Al_{2}O_3$ powder and SiC whisker as the matrix and reinforcement, respectively. The whisker and powder were mixed using a turbo mill. The composite was produced at SiC whisker volume fraction of $0.3\%$. Compared with monolithic $Al_{2}O_3$, fracture toughness enhancement was observed in $SiC_{w}/Al_{2}O_3$ composite. This improved fracture toughness was attributed to SiC whisker bridging and crack deflection. $SiC_{w}/Al_{2}O_3$ composite exhibited typically brittle fracture behavior, but a fracture process zone was observed in this composite. This means that the load versus load-line displacement curve of $SiC_{w}/Al_{2}O_3$ composite from a fracture test may involve a small non-linear region near the peak load.

• Journal of Electrical Engineering and Technology
• /
• 제6권1호
• /
• pp.59-66
• /
• 2011

This work treat the modeling and simulation of non-linear dynamic behavior of a web winding process during traction. We designate by a winding process any system applying the cycles of unwinding, transport, treatment, and winding to various flat products. This system knows several constraints, such as the thermal effects caused by the frictions, and the mechanical effects provoked by metal elongation, that generates dysfunctions due to the influence of the process conditions. Several controllers are considered, including Proportional-integral (PI) and Backstepping control. This paper presents the study of Backstepping controls strategy of the winding system. Our winding system is simulated in MATLAB SIMULINK environment, the results obtained illustrate the efficiency of the proposed control with no overshoot, and the rising time is improved with good disturbances rejections comparing with the classical control law.

• 대한정형외과스포츠의학회지
• /
• 제7권2호
• /
• pp.146-150
• /
• 2008

견갑-흉곽 해리는 둔상이나, 견갑부 전외측 방향으로 가해진 강한 견인력에 의해 견갑-흉곽 관절의 붕괴를 야기하는 드문 손상이다. 이 손상은 견갑부에 피부 손상은 없으나 심한 부종, 손상받은 견갑부의 외측이동으로 특징 지어지며, 많은 경우에 다양한 근골격계 손상과 신경혈관 손상이 동반된다. 본원에서는 체포과정에서 발생된 33세 남자환자에서 골절과 혈관 손상이 관찰되지 않은 견갑-흉곽 해리를 경험하였기에, 진단 방법과 임상 양상, 치료 방침을 문헌 고찰과 함께 보고하는 바이다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권9호
• /
• pp.626-634
• /
• 2000

The paper describes a new and rigorous mathematical model using counter-EMF for the rotor field oriented system with induction motor which uses the estimated speed and rotor flux based on a Model Reference Adaptive System as well as the real-time approach. The estimated speed and rotor flux is used for the speed and flux feedback control. The stability and the convergence of the estimator are improved on the basis of hyperstability theory for non-linear systems. The validity of the proposed method is verified by simulation and also the sensorless control was tested on the propulsion system simulator used for the development of Korean High-Speed Railway Train(KHSRT).