• Medical Lasers
• /
• 제8권1호
• /
• pp.13-18
• /
• 2019

Background and Objectives High-intensity focused ultrasound (HIFU) can produce small zones of thermal damage. A HIFU procedure is non-invasive and it can achieve rejuvenation of facial skin. Fractional CO₂ laser resurfacing delivers thermal damage to the pixilated columnar zone of the skin and so evoke collagen remodeling, the same as HIFU. In many cases, the patients who want rejuvenation with HIFU are also good candidates for cutaneous photorejuvenation such as can be accomplished via fractional CO₂ resurfacing. If patients are treated in a single session by remodeling both the superficial and deep compartments of skin by using both modalities, then improvement in rhytides and tightening of sagging skin will optimize the aesthetic result. Materials and Methods Between May 2014 and January 2018, a total of 44 patients were treated with combination HIFU and fractional CO₂ laser resurfacing according to our protocol. First, the HIFU was applied to the entire face with an average of 300 treatment lines. Immediately after HIFU treatment, the ultrasound gel was washed off and then fractional CO₂ laser resurfacing was performed. We evaluated the patients using 4-point grading scales. The clinician examined the skin for evidence of complications after the completion of treatment. Results All the patients' skin quality showed improvement. Further. the clinical results after duel modality treatment were substantially better than that after the use of either modality alone. The recovery times and the incidence of adverse events when quickly and consecutively performing both treatments were similar as compared to those with employing stepwise treatment. We encountered no complications whatsoever. Conclusion When compared with stepwise therapy, combination therapy with HIFU and fractional CO₂ resurfacing offers better, safer and more effective clinical results. Thus, for targeting multiple layers of aging facial skin, this combination therapy can be safely performed in a single treatment session.

• 자원환경지질
• /
• 제47권5호
• /
• pp.507-515
• /
• 2014

석면이 발암물질로 지정 되면서 물리화학적 처리를 통하여 석면광물을 비섬유형으로 변형시키거나 또는 상전이시킴으로 광물 종을 변화시켜 무해화하는 연구가 진행되고 있다. 하지만 국내에서는 석면의 광물학적 특성과 함께 무해화가 가능함을 제시하는 연구만 진행되었을 뿐, 열처리에 따른 석면광물의 형태 및 결정구조 변화에 대한 연구는 미비한 실정이다. 따라서 본 연구에서는 국내에서 산출되는 백석면(chrysotile)과 석면형 투각섬석(asbestiform tremolite)에 대하여 열처리 전 후 석면의 형태 변화와 상전이에 따른 광물학적 특성을 전자현미경법으로 연구하였다. 백석면은 $850^{\circ}C$에서 2시간 동안 열처리된 후 감람석으로 상전이 되었으며, 석면형 투각섬석은 $1050^{\circ}C$에서 2시간 동안 열처리된 후 투휘석으로 상전이 되었다. 이러한 광물 상전이를 전자현미경법으로 연구한 결과, 두 석면은 섬유상 및 침상의 형태를 보이는 섬유다발이 열처리에 의해 끝이 매끄러운 주상의 형태로 변형되었으며, 분쇄하여도 벽개면, 섬유다발 등과 같은 형태로 발달하지 않음을 확인하였다. 또한 열처리에 따른 광물의 주 구성성분 변화 없이 결정구조의 변화가 일어남을 확인하였다. 이는 함수 규산염광물인 석면이 열에 의해 수산기(OH)가 제거되면서 광물의 상전이와 결정구조의 변화가 나타난 것으로 사료된다. 이처럼 전자현미경법은 석면의 형태, 화학성분, 그리고 결정구조의 변화를 동시에 확인 할 수 있어 광물 상전이에 따른 석면의 무해화를 연구하는데 효과적인 방법으로 판단된다.

• 한국축산식품학회지
• /
• 제44권2호
• /
• pp.309-325
• /
• 2024

The consumption of meat has been increasing, leading to a dynamic meat and meat processing industry. To maintain the quality and safety of meat products, various technologies have been explored, including intense pulsed light (IPL) technology. Several factors affect the inactivation of microorganisms by IPL treatment, including light intensity (fluence), treatment duration, pulse frequency, and the distance between the lamp and the samples. Meat products have been studied for IPL treatment, resulting in microbial reductions of approximately 0.4-2.4 Log. There are also impacts on color, sensory attributes, and physico-chemical quality, depending on treatment conditions. Processed meat products like sausages and ham have shown microbial reductions of around 0.1-4 Log with IPL treatment. IPL treatment has minimal impact on color and lipid oxidation in these products. Egg products and dairy items can also benefit from IPL treatment, achieving microbial reductions of around 1-7.8 Log. The effect on product quality varies depending on the treatment conditions. IPL technology has shown promise in enhancing the safety and quality of various food products, including meat, processed meat, egg products, and dairy items. However, the research results on animal-based food are not diverse and fragmentary, this study discusses the future research direction and industrial application through a review of these researches.

• 한국재료학회지
• /
• 제27권8호
• /
• pp.422-430
• /
• 2017

Al/expanded graphite was successfully synthesized through a facile method including ultrasonic and heat treatment. In the well-designed three dimensional structure, expanded graphite(EG) works as a conductive matrix to support coated Al particles. The effects of the fabrication parameters on the microstructures and thermal conductivities of these composites were investigated. As a result, it was found that composites with graphite volume fraction of 17.4-69.4 % sintered at $600^{\circ}C$/45MPa exhibit in-plane thermal conductivities of 380-940 W/mK, over 90 % of the predictions by rule of mixture. According to the non-destructive analysis results, the synergistic enhancement was caused by the formation of efficient thermally conductive pathways due to the hybrid of the differently sized EG. The structure integrates the advantages of expanded graphite as a conductive support, preserving the electrode activity and integrity and improving the electrochemical performance.

• Journal of Electrical Engineering and information Science
• /
• 제3권1호
• /
• pp.68-72
• /
• 1998

The photomachinable glass-ceramics of Ag and CeO2 doped Li203-SiO2 (LAS)glass system was investigated as a function of UV irradiation time. After the expose and the non-exposed samples were heated, they went under crystalline phase with DTA, SEM, TEM and XRD of normal/high temperature. In this work, crystalline phases, microstructure and dielectric properties were studied under the various time of UV irradiation and heat treatment.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.258-262
• /
• 1994

Thermography is a non-invasive, comfortable, diagnostic technique to monitor successful sympathetic block. We observed abnormal thermal distribution during disease state and then followed with thermography on the process of treatment with stellate ganglion block.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2008년도 Asian Magnetics Conference
• /
• pp.253.2-253.2
• /
• 2008

• 열처리공학회지
• /
• 제35권5호
• /
• pp.239-245
• /
• 2022

The purpose of this study is to evaluate the degree of microstructural change of materials using ultrasonic nonlinear parameters. For microstructure change, isothermal heat-treated ferritic 2.25Cr steel and low-cycle fatigue-damage copper alloy were prepared. The variation in ultrasonic nonlinearity was analyzed and evaluated through changes in hardness, ductile-brittle transition temperature, electron microscopy, and X-ray diffraction tests. Ultrasonic nonlinearity of 2.25Cr steel increased rapidly during the first 1,000 hours of deterioration and then gradually increased thereafter. The variation in non-linear parameters was shown to be coarsening of carbides and an increase in the volume fraction of stable M6C carbides during heat treatment. Due to the low-cycle fatigue deformation of oxygen-free copper, the dislocation that causes lattice deformation developed in the material, distorting the propagating ultrasonic waves, and causing an increase in the ultrasonic nonlinear parameters.

• The Journal of Advanced Prosthodontics
• /
• 제8권4호
• /
• pp.259-266
• /
• 2016

PURPOSE. The purpose of this study was to assess the effect of surface treatments on shear bond strength of resin composite bonded to thermocycled and non-thermocycled CAD/CAM resin-ceramic hybrid materials. MATERIALS AND METHODS. 120 specimens ($10{\times}10{\times}2mm$) from each material were divided into 12 groups according to different surface treatments in combination with thermal aging procedures. Surface treatment methods were airborne-particle abrasion (abraded with 50 micron alumina particles), dry grinding (grinded with $125{\mu}m$ grain size bur), and hydrofluoric acid (9%) and silane application. According to the thermocycling procedure, the groups were assigned as non-thermocycled, thermocycled after packing composites, and thermocycled before packing composites. The average surface roughness of the non-thermocycled specimens were measured after surface treatments. After packing composites and thermocycling procedures, shear bond strength (SBS) of the specimens were tested. The results of surface roughness were statistically analyzed by 2-way Analysis of Variance (ANOVA), and SBS results were statistically analyzed by 3-way ANOVA. RESULTS. Surface roughness of GC were significantly lower than that of LU and VE (P<.05). The highest surface roughness was observed for dry grinding group, followed by airborne particle abraded group (P<.05). Comparing the materials within the same surface treatment method revealed that untreated surfaces generally showed lower SBS values. The values of untreated LU specimens showed significantly different SBS values compared to those of other surface treatment groups (P<.05). CONCLUSION. SBS was affected by surface treatments. Thermocycling did not have any effect on the SBS of the materials except acid and silane applied GC specimens, which were subjected to thermocycling before packing of the composite resin.

• The Journal of Korean Physical Therapy
• /
• 제16권1호
• /
• pp.157-182
• /
• 2004

The purpose of this study was to evaluate effects of lumbar stabilizing exercise on the functional recovery and the range of motion of low back pain patients. The subjects were consisted of sixty patients who had non specific chronic low back pain(32 females. 28 males; mean aged 37.3) from 19 to 65 years of age(mean age : 37.3). All subjects randomly assigned to the lumbar stabilizing exercise group, the modalities treatment group, the manual treatment group. Lumbar stabilizing exercise group received manual treatment with lumbar stabilizing exercise for 30minutes, modalities treatment group received hot pack used thermal therapy for 20minutes and ICT used electrical therapy for 20minutes and US or MWD used deep thermal therapy for 15minutes, manual treatment group received modalities treatment with therapeutic massage for 10minutes and joint mobilization or manipulation for 10minutes per day and three times a week during 4 weeks period. The Multilevel Roland-Morris Disability Questionnaire(MR-MDQ) was used to measure functional disability level. Visual Analogue Scale(VAS) was used to measure subjective pain level. Remodified Schober test(RST) was used to measure forward flexion range of motion of lumbar segment. Finger-to-Floor test(F-T-FT) was used to measure forward flexion range of motion of full spine of low back pain patients. All measurements of each patients were measured at pre-treatment and 4 week post-treatment. The results of this study were summarized as follows : 1. The MR-MDQ of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 2. The VAS of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 3. The RST of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 4. The F-T-FT of lumbar stabilizing exercise group, modalities treatment group, and manual treatment group was significantly reduced between pre-treatment and post-treatment(p<.05). 5. The results of analyzed effects of MR-MDQ, RST, F-T-FT were significantly reduced (p<.05), but VAS wasn't significantly reduced(p>.05) between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment. 6. The results of LSD post-hoc to find difference between treatment type of lumbar stabilizing exercise group and modalities treatment group and manual treatment group according to pre-treatment and post-treatment that MR-MDQ was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and VAS wasn't significantly reduced all treatment group(p>.05), and RST was significantly reduced stabilizing exercise group than modalities treatment group(p<.05), and F-T-FT was significantly reduced stabilizing exercise group than modalities treatment group and manual treatment group (p<.05).