• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.471-478
• /
• 2013

PURPOSE. The aim of the study was to evaluate the effect of annealing on the nanostructure and hardness of Co-Cr metal ceramic samples that were fabricated with a direct metal laser sintering (DMLS) technique. MATERIALS AND METHODS. Five groups of Co-Cr dental alloy samples were manufactured in a rectangular form measuring $4{\times}2{\times}2$ mm. Samples fabricated by a conventional casting technique (Group I) and prefabricated milling blanks (Group II) were examined as conventional technique groups. The DMLS samples were randomly divided into three groups as not annealed (Group III), annealed in argon atmosphere (Group IV), or annealed in oxygen atmosphere (Group V). The nanostructure was examined with the small-angle X-ray scattering method. The Rockwell hardness test was used to measure the hardness changes in each group, and the means and standard deviations were statistically analyzed by one-way ANOVA for comparison of continuous variables and Tukey's HSD test was used for post hoc analysis. P values of <.05 were accepted as statistically significant. RESULTS. The general nanostructures of the samples were composed of small spherical entities stacked atop one another in dendritic form. All groups also displayed different hardness values depending on the manufacturing technique. The annealing procedure and environment directly affected both the nanostructure and hardness of the Co-Cr alloy. Group III exhibited a non-homogeneous structure and increased hardness ($48.16{\pm}3.02$ HRC) because the annealing process was incomplete and the inner stress was not relieved. Annealing in argon atmosphere of Group IV not only relieved the inner stresses but also decreased the hardness ($27.40{\pm}3.98$ HRC). The results of fitting function presented that Group IV was the most homogeneous product as the minimum bilayer thickness was measured (7.11 ${\AA}$). CONCLUSION. After the manufacturing with DMLS technique, annealing in argon atmosphere is an essential process for Co-Cr metal ceramic substructures. The dentists should be familiar with the materials that are used in clinic for prosthodontics treatments.

• Korean Journal of Social Welfare
• /
• v.59 no.3
• /
• pp.147-174
• /
• 2007

This study examines how path dependency of working poor labor market segmented from the primary and the secondary labor market affects employment and quality of employment of working poor. It Further examines how path dependency makes working poor to remain in the labor market and makes it difficult for them to escape from a vicious poverty cycle. Data is based on the $3{\sim}7th$ Korea Labor and Income Panel Study(KLIPS). Markov's transition probability and discrete-time hazard analysis are used for analysis. This study finds that Korea labor market is divided into three parts; the primary labor market, the secondary labor market and the working poor labor market. The proportion of employed poor has been reduced, but the proportion of non economically-active working poor has been increased and has become the main group among the working poor. This shows that labor demand of working poor is fundamentally lacking and there are structural barriers that block working poor's employment itself. The regression analysis shows that the longer working poor labor market participation is, the lower poverty-exit rate. This is an evidence of vicious poverty cycle that the poor have little chance to exit from working poor labor market, once they step into it. Therefore, the longer their participation in poor labor market, the more likely they would move only within the closed working poor labor market. Consequently, it is necessary to fundamentally reform labor market structure and to alleviate negative perception and discrimination about the poor labor while activating labor demand.

• Journal of the Korea Convergence Society
• /
• v.11 no.2
• /
• pp.225-230
• /
• 2020

Using the 3D printing method in the product manufacturing is a very innovative and useful technology. However, in the field of jewelry, it is a limited technology used only in a field of manufacturing process. To overcome this limitations in the jewelry production process, most popular and easy 3D printing method was selected, and the printing time and condition was limited. In this study, to find out the 3D printing method applicability to jewelry work manufacturing, the prototypes through casting and non-casting methods were completed and compared. As a result, the FDM printing method has a very positive advantage in terms of cost and time, but there is a disadvantage that the layered structure is not erased on the surface and the completeness of the surface forming is poor due to the residue of the filament generated during the printing process. The DLP printing method has the advantage that the surface treatment is even and completion is high, while the cost and time are inefficient. However, both printing methods were found to be suitable for the use of jewelry manufacturing, and if the efficient printing method was selected for the design of the jewelry in the future, better work research could be conducted.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.1
• /
• pp.1-10
• /
• 2015

Recently, several researches on the development of new economical anchor systems have been performed to support floating structures. This study focused on the group suction piles, which connect mid-sized suction piles instead of a single suction pile with large-diameter. The group suction pile shows the complex bearing behavior with translation and rotation, so it is difficult to apply conventional design methods. Therefore, the numerical modeling technique was developed to evaluate the horizontal bearing capacity of the group suction piles in clay. The technique models suction piles as beam elements and soil reaction as non-linear springs. To analyze the applicability of the modeling, the horizontal load-movement curves of the proposed modeling were compared with those of three-dimensional finite element analyses. The comparison showed that the modeling underestimates the capacity and overestimate the displacement corresponding to the maximum capacity. Therefore, the correction factors for the horizontal soil resistance was proposed to match the bearing capacity from the three-dimensional finite element analyses.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.3
• /
• pp.82-89
• /
• 2012

This paper presents the intelligent tracking algorithm for maneuvering target using the positional error compensation of the maneuvering target. The difference between measured point and predict point is separated into acceleration and noise. Fuzzy c-mean clustering and predicted impact point are used to get the optimal acceleration value. The membership function is determined for acceleration and noise which are divided by fuzzy c-means clustering and the characteristics of the maneuvering target is figured out. Divided acceleration and noise are used in the tracking algorithm to compensate computational error. The filtering process in a series of the algorithm which estimates the target value recognize the nonlinear maneuvering target as linear one because the filter recognize only remained noise by extracting acceleration from the positional error. After filtering process, we get the estimates target by compensating extracted acceleration. The proposed system improves the adaptiveness and the robustness by adjusting the parameters in the membership function of fuzzy system. To maximize the effectiveness of the proposed system, we construct the multiple model structure. Procedures of the proposed algorithm can be implemented as an on-line system. Finally, some examples are provided to show the effectiveness of the proposed algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.1
• /
• pp.91-105
• /
• 2016

Carbon Nanotube Field-Effect Transistors (CNTFETs) have been studied as candidates for post Si CMOS owing to the better electrostatic control and high mobility. To enhance the immunity against short - channel effects (SCEs), the novel channel and gate engineered architectures have been proposed to improve CNTFETs performance. This work presents a comprehensive study of the influence of channel and gate engineering on the CNTFET switching, high frequency and circuit level performance of carbon nanotube field-effect transistors (CNTFETs). At device level, the effects of channel and gate engineering on the switching and high frequency characteristics for CNTFET have been theoretically investigated by using a quantum kinetic model. This model is based on two-dimensional non-equilibrium Green's functions (NEGF) solved self - consistently with Poisson's equations. It is revealed that hetero - material - gate and lightly doped drain and source CNTFET (HMG - LDDS - CNTFET) structure can significantly reduce leakage current, enhance control ability of the gate on channel, improve the switching speed, and is more suitable for use in low power, high frequency circuits. At circuit level, using the HSPICE with look - up table(LUT) based Verilog - A models, the impact of the channel and gate engineering on basic digital circuits (inverter, static random access memory cell) have been investigated systematically. The performance parameters of circuits have been calculated and the optimum metal gate workfunction combinations of ${\Phi}_{M1}/{\Phi}_{M2}$ have been concluded in terms of power consumption, average delay, stability, energy consumption and power - delay product (PDP). In addition, we discuss and compare the CNTFET-based circuit designs of various logic gates, including ternary and binary logic. Simulation results indicate that LDDS - HMG - CNTFET circuits with ternary logic gate design have significantly better performance in comparison with other structures.

• Korean Journal of Ichthyology
• /
• v.24 no.2
• /
• pp.84-93
• /
• 2012

Fish species composition and abundance in the waters of nearby Nakdong River estuary were investigated non-continuously and seasonally by shrimp beam trawl in summer 2007, winter 2009, and from spring 2010 to autumn 2010. During the study period, total fish species were collected 92 species, 36 families in study area. Shannon index was 1.893~2.962, and evenness was 0.050~0.231. Fish species composition was shown interannually and seasonally variations in the waters of nearby Nakdong River estuary. We carryed out cluster analysis to contain the data in previous and current study. Fish species composition was divided 3 groups which were 1987~1988 and 1998, 2001~2002, and 2007~2008 and 2009~2010. Average and minimum length in this study was longer than its in previous studies, and length range in this study was wider than its in previous studies, too. Dominant fish increased individuals and weight per unit area in this study. Especially Lophius litulon, Raja kenojei, Eopsetta grigorjewi, and Zeus faber were much better than past 2002. Liparis tanakai, Repomucenus valenciennei and Leiognathus nuchalis were dominant fish in previous study, but those decreased individuals and weight per unit area in this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1075-1085
• /
• 2005

The purpose of this paper is to design the architecture for synchronization of MB-OFDM UWB system that is being processed the standardization for Alt-PHY of WPAN(Wireless Personal Area Network) at IEEE802.15.3a and to analyze the implementation loss due to 4 parallel synchronization architecture for design or link margin. First an overview of the MB-OFDM UWB system based on IEEE802.15.3a Alt-PHY standard is described. The effects of non-ideal transmission conditions of the MB-OFDM UWB system including carrier frequency offset and sampling clock offset are analyzed to design a full digital architecture for synchronization. The synchronization architecture using 4-parallel structure is then proposed to consider the VLSI implementation including algorithms for carrier frequency offset and sampling clock offset to minimize the effects of synchronization errors. The overall performance degradation due to the proposed synchronization architecture is simulated to be with maximum 3.08 dB of the ideal receiver in maximum carrier frequency offset and sampling clock offset tolerance fir MB-OFDM UWB system.

• Journal of Bio-Environment Control
• /
• v.11 no.2
• /
• pp.81-87
• /
• 2002

This study was conducted to investigate the cooling efficiency and growth of tomatoes by root zone cooling device using a pad-box and cultivated system. The structure of the root zone cooling system using a pad-box was four piece of pads bonded an the side and a fan set at the bottom. Cool wind was generated by the outside air which was punched at intervals of 10 cm along three rows. Cold wind flowed to the root zone in the culture medium. The root zone cooling efficiency of cold wind generation by using a pad-box flowing through a wet-pad was determined. Major characteristic of this cuttural system consist of bed filled with a perlite medium and a ventilation pipe using PVC. The cold wind generation by a pad box (CWP) was compared to that of cold wind generation by a radiator (CWR), cold water circulation using a XL-pipe (CWX) and the control (non-cooling). When the temperature of water supplied was 16.2-18.4$^{\circ}C$, temperatures in the medium were 20.5~23.2$^{\circ}C$ for CWP 22.7~24.2$^{\circ}C$ for CWR, 22.8~24.27$^{\circ}C$ for CWX and 23.1~-29.6$^{\circ}C$ for the control. The results show that the cold wind temperature using the pad-box was lower by 1~2$^{\circ}C$ than that of cold water circulation in the XL-pipe and lower by 5~6$^{\circ}C$ than that of the control. Growth such as leaf length, leaf width, fresh weight and dry weight, was greater in three root zone cooling methods than in the control. Root activity was higher in the rat zone cooling methods than in the control. However, there was no significant difference among root zone cooling methods.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.55-62
• /
• 2009

Location based Services in the ubiquitous computing environment, namely u-LBS, use very large and skewed spatial objects that are closely related to locational information. It is especially essential to achieve fast search, which is looking for POI(Point of Interest) related to the location of users. This paper examines how to search large and skewed POI efficiently in the u-LBS environment. We propose the Dynamic-level Grid based R-Tree(DGR-Tree), which is an index for point data that can reduce the cost of stationary POI search. DGR-Tree uses both R-Tree as a primary index and Dynamic-level Grid as a secondary index. DGR-Tree is optimized to be suitable for point data and solves the overlapping problem among leaf nodes. Dynamic-level Grid of DGR-Tree is created dynamically according to the density of POI. Each cell in Dynamic-level Grid has a leaf node pointer for direct access with the leaf node of the primary index. Therefore, the index access performance is improved greatly by accessing the leaf node directly through Dynamic-level Grid. We also propose a K-Nearest Neighbor(KNN) algorithm for DGR-Tree, which utilizes Dynamic-level Grid for fast access to candidate cells. The KNN algorithm for DGR-Tree provides the mechanism, which can access directly to cells enclosing given query point and adjacent cells without tree traversal. The KNN algorithm minimizes sorting cost about candidate lists with minimum distance and provides NEB(Non Extensible Boundary), which need not consider the extension of candidate nodes for KNN search.