• 제목/요약/키워드: Non-standard difference method

검색결과 122건 처리시간 0.031초

GM 고추의 환경위해성 평가 프로토콜 작성을 위한 농업적 형질 분석 (Analysis of Agricultural Characters to Establish the Evaluating Protocol and Standard Assessment for Genetically Modified Peppers)

  • 조동욱;정규환
    • 한국환경과학회지
    • /
    • 제20권9호
    • /
    • pp.1183-1190
    • /
    • 2011
  • This study was aimed to establish the evaluating protocol and standard assessment for genetically modified (GM) hot pepper and to find out a proper statistic method to analyze for equality of agricultural characters between GM and non-GM pepper lines. GM and non-GM hot pepper lines were cultivated in two GMO fields in the middle region of Korea and total of 52 agricultural characters were collected during the plant growing season for 4 years, 2007 to 2010. Levene's test was conducted to confirm the homogeneity of raw data before statistic analysis. Two-way ANOVA in the multivariate tests and t-test were conducted to analyze 52 agricultural characters in order to find out the equality between H15 and P2377. From the statistical analysis through two-way ANOVA, 16 out of 16 plant growth traits, 9 out of 18 green fruit traits and 7 out of 18 red fruit traits among 4 years and 9 out of 16 plant growth traits, 4 out of 18 green fruit traits and 3 out of 18 red fruit traits between H15 and P2377 have shown the statistic differences. With the same raw data of 52 agricultural characters, t-test was also conducted. Based on the result from t-test, only 1 out of 16 plant growth traits, 2 out of 18 green fruit traits and 1 out of 18 red fruit traits have shown the differences between H15 and P2377, so that it was concluded that there is no statistic difference between H15 and P2377 in terms of agricultural characters. Also, the t-test is a proper statistic method to analyze each trait between GM and its control lines in order to evaluate agricultural characters.

수직점프 시 비탄력 테이핑이 발목 발등굽힘과 하퇴삼두근의 근활성도에 미치는 영향 (Effect of Non-elastic Taping on Ankle Dorsiflexion and Activity of the Triceps Surae Muscles While Vertical Jumping)

  • 김근수;원종혁;정도영
    • 대한물리의학회지
    • /
    • 제11권4호
    • /
    • pp.11-17
    • /
    • 2016
  • PURPOSE: There are several standard interventions for managing Achilles tendinitis, including eccentric exercise and calf muscle stretches, orthoses, electrotherapy, and taping. However, no study has determined the effect of non-elastic taping on deloading the Achilles tendon while vertical jumping. Therefore, this study determined the effect of non-elastic taping on ankle dorsiflexion and the triceps surae muscle activity while vertical jumping in healthy subjects. METHODS: The study recruited 17 participants. A motion analysis system was used to measure the angle of ankle dorsiflexion and wireless surface electromyography was used to measure the soleus and gastrocnemius activities while vertical jumping. Non-elastic taping was applied on randomized leg side. All subjects performed maximal effort vertical jumps without and with non-elastic taping, with three trials for each condition. The mean peak dorsiflexion and muscle activities during the three trials were calculated and paired t-tests were used to compare the mean values without and with non-elastic taping. Significance was defined as (p<.05). RESULTS: The maximum angle of ankle dorsiflexion and activity of the gastrocnemius muscle decreased significantly when non-elastic tape was applied (p<.05), while there was no significant difference in the soleus activity between no-taping and taping (p>.05). CONCLUSION: We introduce non-elastic taping as a method to decrease maximum ankle dorsiflexion and gastrocnemius activity while vertical jumping.

통계적 방법을 이용한 니켈도금 표면거칠기의 텍스처 해석 (Texture Analysis of Nickel Plating Surface Roughness Using Statistical Method)

  • 공재항;사승윤;유봉환
    • 대한기계학회논문집A
    • /
    • 제24권5호
    • /
    • pp.1254-1260
    • /
    • 2000
  • There have been many developments in super precision working technique and working method up to, now. But, it is very difficult to evaluate working surface accurately without the technicians experience and judgment. Surface roughness tester using stylus was used to measure surface condition generally But this method is not so desirable because of damage on test piece caused by contact between the workpiece and the stylus sensor. As a result, non-contact method was known as a good way to carry, out this process without damage. However, this is a difficult one among the various measuring methods. So we are tying to suggest a new method using texture analysis through image processing to get a surface information in worked test piece. Co-occurrence matrix using difference of gray levels between a pixel and its neighboring one was used to study behavior of surface roughness and to J acquire data for analysis. Standard specimen was adapted to verify this research. We suggest texture information method in order to evaluate surface state for the best measurement system.

항암제 취급 간호사의 소변중 돌연변이 유발능과 자각증상 및 스트레스 (Urinary Mutagenicity, Physical Symptoms and Stress of Nurses Handling Anticancer Drugs)

  • 김봉임
    • 대한간호학회지
    • /
    • 제26권4호
    • /
    • pp.963-975
    • /
    • 1996
  • The purpose of this study was to call attention to the mental, physical and occupational hazards of the anticancer-drug-handling nurses by examining the possible urinary mutagenicity and measuring physical symptoms and stress level of the nurses exposed to anticancer drugs. The experimental group of the urinary mutagenicity assay was 14 nurses handling anticancer drugs at the medical wards of a hospital located in J city ; the control group was 12 psychiatric nurses of the same hospital. The test material was the nurses' 24hrs urine, which was concentrated by XAD-2 column chromatography. Tester strains were TA98(±S9 mix), TA100(±S9 mix), TA1535(±S9 mix) and TA1537(±S9 mix) ; Salmonella mammalian-microsomal test(Ames test) was employed for the urinary mutagenicity assay. The physical symptoms of which the nurses experienced were investigated through self-reports on open-questionnaires. The stress levels of the experimental group were measured by a stress measuring instrument developed by this author. Reliability of this instrument was found to be adequate (Cronbach's Alpha=0.9079). To ascertain the urinary mutagenicity of the experimental group, the mean and the standard deviation of the colonies of Tester strains appearing on the minimal plates were taken and compared differences between two groups. T-test was employed for the significance test of two groups. The physical symptoms were compared between the two groups through the analysis of the nurse' self-reports. The mean and standard deviation of the stress levels of the experimental group were also calculated and were examined through t-test. The results were summarized as follows : 1. The experimental group revealed significantly higher urinary mutagenicity both in the activation method test and the non-activation method test of the tester strains TA98, TA100 and TA1535. In the case of TA1537, two groups showed no difference in the non-activation method test, but the activation method revealed difference. 2. The physical symptoms were also much more frequently reported in the experimental group. 79.3% of the experimental group reported more than 1 kind of physical symptoms. On the other hand, 33.2% of the control group complained of 1 kind of physical symptom. The items with high symptom frequency were 'headache', 'itching sensation', 'corneal congestion', 'skin allergy' 3. The mean score of stress in the experimental group was 2.41(range 1-4). The experimental group showed the stress level above 2.0 in the 14 of 15 items in all. The highest stress level were recorded in the following items in the order quoted, 'I fear that anticancer drug may touch any part of body while handling it.', 'I feel concerned there is no protective countermeasure against anticancer drug handling.', 'I am afraid the anticancer drug handling may produce a fetal loss in the future'.

  • PDF

홀 형상이 막 냉각 유동에 미치는 효과에 대한 수치 해석적 연구 (A numerical simulation on the effect of hole geometry for film cooling flow)

  • 이정희;최영기
    • 대한기계학회논문집B
    • /
    • 제21권7호
    • /
    • pp.849-861
    • /
    • 1997
  • In this study, the effect of hole geometry of the cooling system on the flow and temperature field was numerically calculated. The finite volume method was employed to discretize the governing equation based on the non-orthogonal coordinate with non-staggered variable arrangement. The standard k-.epsilon. turbulence model was used and also the predicted results were compared with the experimental data to validate numerical modeling. The predicted results showed good agreement in all cases. To analyze the effect of the discharge coefficient for slots of different length to width, the inlet chamfering and radiusing holes were considered. The discharge coefficient was increased with increment of the chamfering ratio, radiusing ratio and slot length to width and also the effect of radiusing showed better result than chamfering in all cases. In order to analyze the difference between the predicted results with plenum region and without plenum region, the velocity profiles of jet exit region for a various flow conditions were calculated. The normal velocity components of jet exit showed big difference for the low slot length to width and high blowing rate cases. To analyze the flow phenomena injected from a row of inclined holes in a real turbine blade, three dimensional flow and temperature distribution of the region including plenum, hole and cross stream with flow conditions were numerically calculated. The results have shown three-dimensional flow characteristics, such as the development of counter rotating vortices, jetting effect and low momentum region within the hole in addition to counter rotating vortex structure in the cross stream.

차분방법에 의한 OFDM 심볼 동기검출 방식 (A Symbol Synchronization Detection by Difference Method for OFDM Systems)

  • 주창복;박남천
    • 대한전자공학회논문지TC
    • /
    • 제43권2호
    • /
    • pp.56-65
    • /
    • 2006
  • 본 논문에서는 멀티패스 채널의 지연프로필이나 채널에 부가되는 잡음에 영향을 받지 않으면서 정확한 GI검출 성능을 보이는 간단한 구조의 수정차분방식의 동기검출 방식에 있어서 동기 검출점에서의 S/N비율과 동기점 검출성능과의 관계를 보여준다. 컴퓨터 시뮬레이션에서는 또 IEEE802.11a 표준의 OFDM 프레임을 사용하고 쇼트와 롱 트레이닝의 4심볼을 심볼 동기타이밍 검출에 사용한다. 수신 OFDM신호위상이 1심볼내에서 ${\pi}/2$이내로 일어나는 최소위상채널은 물론 ${\pi}$까지 회전하는 비최소위상 채널에서도 수정차분방식은 채널에 부가되는 잡음전력의 크기에 관계없이 OFDM신호의 1샘풀간격 이내의 오차로 타이밍을 검출해내는 성능을 보인다.

초음파 감쇠계수 주정에 있어서 빔 형태의 보정에 관한 연구 (A Study on the Correction of Beam Pattern for the Ultrasonic Attenuation Coefficient Estimation)

  • 김기욱;최흥호;홍승홍
    • 대한의용생체공학회:의공학회지
    • /
    • 제8권1호
    • /
    • pp.41-48
    • /
    • 1987
  • In estimating the freguency-dependent attenuation coefficient, we analyzed the range-dependent ultrasonic beam and proposed the method of calculating the experimental equation of beam pattern in order to reduce the error on the influence of beam pattern. These experimental equations are divided into the spectral centroid and the spec ural standard deviation slope according to axial propagation length. These are repnesented by the first-order equation in the near field of the beam and the second- order eqLlatlon In the far field. In order to prove the validity of this method, the attenuation coefficients of the non-corrected ease and the corrected case are compared. Using the reflected signal from acryle plate, the attenuation coefficients were estimated by the spectral shift method ann the spectral difference method. The result shows attenuation coeffi talents after correction are better than attenuation coefficients before correction. And this method can be applied In vivo measurement.

  • PDF

암석 열전도도 측정을 위한 Laser Flash Method와 Divided-bar Method 비교 (A Comparison of Laser Flash and the Divided-bar Methods of Measuring Thermal Conductivity of Rocks)

  • 오재호;김형찬;박정민
    • 자원환경지질
    • /
    • 제44권5호
    • /
    • pp.387-397
    • /
    • 2011
  • 본 연구에서는 암석 열전도도 측정을 위해 많이 사용하고 있는 Laser flash method와 Divided-bar method의 장단점을 비교 분석하여 자체 제작한 Divided-bar apparatus의 적용 가능성을 분석하고자 하였다. Laser flash method는 비접촉식으로 아주 작은 시료(두께 3 mm 이하)에 적합하며, 높은 온도($25^{\circ}C{\sim}200^{\circ}C$)의 범위까지 비열, 열확산률, 열전도도 측정이 가능하다. 시료의 조건은 물질이 균등, 균일해야 한다. 반면 Divided-bar method는 주로 상온에서 열전도도만 측정할 수 있다. 밀도가 낮고 공극이 큰 12개의 암석 시료를 두 가지 방법으로 측정 분석해 보았다. Laser flash method로 측정한 결과, 암석 시료 표면의 공극 분포가 일정하지 않으며, 광물 조성이 균등, 균일하지 않아 표면에 laser pulse로 열을 가할 때 반사 및 산란작용의 영향으로 시료 전면과 반대면으로 측정했을 때의 열전도도 차이가 0.001~0.140 W/mK 범위, 표준편차 0.003~0.089 W/mK 범위로 나타났다. divided-bar apparatus의 경우, 비교적 두꺼운 암석 시료를 측정할 수 있어 암석 열전도도 대표성이 높고, 시료를 밀착하여 열전달을 하므로 전면과 반대면으로 측정했을 때의 열전도도 차이는 0.001~0.016 W/mK, 표준편차 0.001~0.034 W/mK 범위로 Laser flash method에 비해 비교적 안정된 값을 보인다.

SOC 자본스톡 추계에 있어서 수익적 지출과 자본적 지출의 적합 분배 (An Appropriated Share between Revenue Expenditure and Capital Expenditure in Capital Stock Estimation for Infrastructure)

  • 조진형;이세재;오현승;권정훈;정남용;김명수
    • 산업경영시스템학회지
    • /
    • 제41권2호
    • /
    • pp.153-158
    • /
    • 2018
  • At the Bank of Korea, capital stock statistics were created by the PIM (perpetual inventory method) with fixed capital formation data. Asset classifications also included 2 categories in residential buildings, 4 non-residential buildings, 14 constructions, 9 transportation equipment, 28 machinery, and 2 intangible fixed assets. It is the Korean government accounting system which is developed much with the field of the national accounts including the valuation, but until 2008 it was consistent with single-entry bookkeeping. Many countries, including Korea, were single-entry bookkeeping, not double-entry bookkeeping which can be aggregated by government accounting standard account. There was no distinction in journaling between revenue and capital expenditure when it was consistent with single-entry bookkeeping. For example, we would like to appropriately divide the past budget accounts and the settlement accounts data that have been spent on dredging into capital expenditure and revenue expenditure. It, then, tries to add the capital expenditure calculated to FCF (fixed capital formation), because revenue expenditure is cost for maintenance etc. This could be a new direction, especially, in the estimation of capital stock by the perpetual inventory method for infrastructure (SOC, social overhead capital). It should also be noted that there are differences not only between capital and income expenditure but also by other factors. How long will this difference be covered by the difference between the 'new series' and 'old series' methodologies? In addition, there is no large difference between two series by the major asset classification level. If this is treated as a round-off error, this is a problem.

수질개선을 위한 축산계 오염물질 관리방안에 대한 고찰 (Systematic Review on Management of Livestock wastes for Improving Water Quality)

  • 안기홍;유홍덕;김용석
    • 한국물환경학회지
    • /
    • 제31권5호
    • /
    • pp.576-582
    • /
    • 2015
  • In recently, the Korea government is concerning on non-point source pollution management to improve water quality. The objective of this paper is to investigate the improvement measurement for management of livestock wastes. As a result, we find that the National Pollution Source Survey is necessary to establish the unified database system with the Korea Statistics(KOSAT) in order to minimize the difference between relevant data. The investigation for environmental impact of livestock manure should be supported the designation of control areas and establishment of the technical guidelines including target material, monitoring site, standard method, etc. In addition, it should be followed by appropriate nutrient recycling and proper fertilizer usage based on social consultation and cost-benefit analysis.