• 한국인터넷방송통신학회논문지
• /
• 제20권3호
• /
• pp.97-103
• /
• 2020

리눅스 Cgroups은 컨테이너 기반 클라우드 서비스 구축에서 각 컨테이너 별 시스템 자원을 할당하기 위한 핵심적인 역할을 담당하고 있다. 특히 입출력 자원의 경우 리눅스 Cgroups은 컨테이너의 가중치에 따라 입출력 대역폭을 분배하는 기법을 지원하고 있다. 그러나 성능 분석 결과에 따르면 현재 리눅스 Cgroups의 입출력 대역폭 분배 기법은 NVMe SSD와 같은 고성능 저장장치를 사용할 경우 입출력 성능이 크게 저하된다는 한계점을 가지고 있다. 따라서 본 논문에서는 리눅스 Cgroups을 위한 새로운 피드백 기반의 동적 대역폭 분배 기법을 제안하고자 한다. 제안하는 기법은 가중치에 따라 입출력 크레딧을 분배하며 고성능 저장장치의 성능 변화를 동적으로 반영해 입출력 크레딧을 계산함으로써 저장장치의 성능 저하를 최소화한다. 제안된 기법은 리눅스 커널 5.3에 구현되었으며 성능 평가 결과 정확한 입출력 대역폭 분배를 수행할 뿐만 아니라 기존 기법에 비해 최대 2배 높은 입출력 성능을 보여주었다.

• Geomechanics and Engineering
• /
• 제24권1호
• /
• pp.29-42
• /
• 2021

The utilization of buildings can be improved by extending them vertically. However, the added load of the extension might require building foundations to be underpinned; otherwise, the loads on the foundations might exceed their bearing capacity. In this study, a preloading method was presented aiming at transferring partial loads from existing piles to underpinning piles. A pneumatic-type model preloading device was developed and used to carry out centrifuge experiments to evaluate the load-displacement behavior of piles, the pile-soil interaction during preloading, and the additional loading caused by vertical extension. The results showed that the preloading devices effectively transfer load from existing piles to underpinning piles. In the additional loading test of group piles, the load-sharing ratio of a pile increased with its stiffness. The load-sharing ratio of a preloaded micropile was less than that of a non-preloaded micropile as a result of the reduction in axial stiffness caused by preloading before additional loading. Therefore, a slight reduction of the load-sharing capacity of an underpinning pile should be considered if the preloading method is applied. Further, two full scale preloading devices was developed. The devices preload underpinning piles and thereby produce reaction forces on a reaction frame to jack existing piles upward, thus transferring load from the existing piles to the underpinning piles. Specifically, screw-type and hydraulic-jack type devices were developed for the practical application of foundation underpinning during vertical extension, and their operability and load transfer effect verified via full-scale structural experiments.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.100-105
• /
• 2021

This study examines the effectiveness of the study through a case of PBL(problem-based-learning) class conducted in a balanced culture course called at 00- University in the second semester of 2020. The effects of learning are as follows: First, PBL(problem-based-learning) has sufficient active interaction between the teacher and the learner. In the face of prolonged non-face-to-face learning, the PBL teaching method has sufficient interaction between the professors-learner and the learner. Second, PBL learning can actively utilize various problems that fit the characteristics of the subject and actively utilize the process of role sharing and collaboration. By presenting various problem situations suitable for the subject, students will be able to share roles individually or as a team, and fully experience the process of collaboration and discussion in the process of investigating the data. Third, critical perceptions of problem situations can be extended. In modern times, a variety of problem situations arise and critical perceptions of them must be fully learned. In a mass production and mass consumption society, students should develop the ability to blindly recognize and distinguish between real and fake information in a flood of information. The limitations identified in this class case are, first, the nature of the subject, "Understanding Culture and Philosophy," which makes it possible to discuss the global cultural phenomenon, but it should be discussed in terms of philosophy. Second, it is not easy to work as a team on non-face-to-face online. Nevertheless, PBL is a very effective method of learning in which active interactions and learning activities take place between professors and students, whether face-to-face or face-to-face online learning.

• Journal of Computing Science and Engineering
• /
• 제1권1호
• /
• pp.74-94
• /
• 2007

Nowadays, sharing data among organizations is often required during the business collaboration. Data mining technology has enabled efficient extraction of knowledge from large databases. This, however, increases risks of disclosing the sensitive knowledge when the database is released to other parties. To address this privacy issue, one may sanitize the original database so that the sensitive knowledge is hidden. The challenge is to minimize the side effect on the quality of the sanitized database so that non-sensitive knowledge can still be mined. In this paper, we study such a problem in the context of hiding sensitive frequent itemsets by judiciously modifying the transactions in the database. Unlike previous work, we consider the quality of the sanitized database especially on preserving the non-sensitive frequent itemsets. To preserve the non-sensitive frequent itemsets, we propose a border-based approach to efficiently evaluate the impact of any modification to the database during the hiding process. The quality of database can be well maintained by greedily selecting the modifications with minimal side effect. Experiments results are also reported to show the effectiveness of the proposed approach.

• 부모자녀건강학회지
• /
• 제14권1호
• /
• pp.28-35
• /
• 2011

Purpose: The aim of this study is to suggest a direction for the development of effective methods for relieving labor pain, by analyzing non-pharmacological interventions through a literature review. Methods: Collection of literature data in this study has been accomplished through theses, reports, and academic data searched on databases of the Research Information Sharing Services (Riss), PubMed, ProQuest, and the National Discovery for Science Leaders (NDSL). Results: Non-pharmacological interventions analyzed as effective in relieving labor pain, in literature published both within and outside of Korea, included: pre-delivery education, Yoga, Doula delivery care, Massage, Music therapy, Aromatherapy, Hypnosis, TENS, Sterilized water injection, and Acupuncture. Conclusion: Several different interventions have been attempted for the relief of labor pain. Since even the same intervention shows different results depending on the research method utilized, critical factors must be acknowledged that compromise the effectiveness of these methods. In addition, study of potential synergy effects of interventions that combine these various methods might also prove to be significant.

• 한국컴퓨터정보학회논문지
• /
• 제23권12호
• /
• pp.137-144
• /
• 2018

In this paper, we propose an well-organized lecture note for giving a better understanding on the Internet of Things (IoT) to people including non-computer majors without computing and communication knowledge. In recent years, the term 'IoT' has been popularized, and IoT will make a huge impact on our industries, societies, and environments. Although there are large amount of literature on presenting IoT from technological perspectives, few are published that are organized for teaching students having non-computer-related majors. Based on research and education experiences on IoT, we tried to make a lecture note focusing on the process of collecting data from everyday objects, transmitting and sharing data, and utilizing data to create new values for us. The proposed lecture note was employed in teaching a liberal arts class, and it was shown that students could have an understanding of what IoT really means and how IoT could change our world.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권1호
• /
• pp.32-36
• /
• 2008

An HTS conductor with parallel HTS tapes is essential for a large power HTS device to flow a large current. One of the most important factor for this conductor is a current distribution. Non-uniform current distribution in parallel tapes makes the critical current of the conductor low and the AC losses high. In this paper we proposed a non-contact method which measured each current in parallel tapes by using an array of Hall sensors. A matrix can be derived from this array for calibration. The current distributions of 4 and 6 parallel tapes were measured.

• 패션비즈니스
• /
• 제19권6호
• /
• pp.82-100
• /
• 2015

Mobile fashion apps present much opportunity for marketers to engage consumers, however not all apps provide enough functions for their targeted audience. This study aims to determine how mobile fashion apps can be used to build brand community with consumer engagement. Qualitative data on fashion mobile apps were collected from the Apple app store and Android market during the spring and summer of 2015. A total of 110 fashion mobile apps were collected;, 50 apps were identified as apparel brands that either manufacture or sell apparel to consumers, which we categorized as "brand" fashion apps, and the remaining 60 were categorized as "non-brand" fashion apps. The result of the study can be summarized as below. The 60 non-brand fashion apps were grouped into 5 app types: shopping, searching, sharing, organizational, and informational. The main functions are for informational use and shopping needs, since at least half (31 apps) are used for either retrieving information or for shopping. However, in contrast, social networking and location were infrequent and not commonly utilized by these apps. The most common type of non-brand fashion apps available were shopping apps;, many shopping apps enable users to shop from several different websites and save their items into one universal shopping cart so that they only check out once. Most of these apps are informational and help consumers make more informed decisions on purchases;, in addition many offer location services to help consumers find these items in store. While these apps perform several functions, they do not link to social media. The 50 brand apps were grouped into 5 brand types: athletic, casual, fast fashion, luxury, and retailer. These apps were also checked for attributes to determine their functionality. The result shows that the main functions of brand fashion apps are for information (82% of the 50 apps) as well as location searching (72% of 50 apps). Conversely, these apps do not offer any photo sharing, and very few have organizational or community functions. Fashion mobile apps and m-marketing elements: To build brand community, mobile apps can be designed to motivate consumer's engagement with brands. The motivations of fashion mobile apps are useful in developing fashion mobile apps. Entertainment motives can be fulfilled with multimedia attributes, functionality motives are satisfied with organizational and location-based features, information motives with informational service, socialization with community and social network, learning and intellectual stimulation from informational attributes, and trend following through photo sharing. The 8 key attributes of mobile apps can correspond to the 4 m-marketing elements (i.e., Informative content, multimedia, interactions, and product promotions) that are further intertwined with m-branding elements. App Attributes and M-Marketing aim to Build Brand Community;, the eight key attributes can impact on 4 m-branding elements, which further contribute to building brand community by affecting consumers' perceptions of brands preference and advocacy, and their likelihood to be loyal.

• 대한한방내과학회지
• /
• 제41권6호
• /
• pp.984-992
• /
• 2020

Objectives: This survey research was conducted to evaluate real-time non-face-to-face education in clinical Korean medicine conducted during the COVID-19 outbreak. Methods: This study was conducted with all 3rd and 4th grade students of the Department of Korean Medicine, Gachon University. The Korean Internal Medicine (Pulmonary) lecture course was held from April 1st to July 1st, 2020 for one semester. The lectures were conducted through real-time non-face-to-face education using the Cisco Webex program, and the lectures were mainly conducted by sharing a PowerPoint summarizing textbook. The questionnaire consisted of 3 parts and a total of 18 questions. The survey was conducted anonymously to ensure the confidentiality of all responses. Results: The overall score for real-time non-face-to-face education was 74.69±18.15 points. The efficiency of real-time non-face-to-face education was 2.12±0.78 points, and opinions on the expansion of future use were 2.08±0.91 points and were generally positive. The ratio of non-face-to-face education and face-to-face education in future clinical Korean medicine theory lectures was about 63:27, with a higher proportion of non-face-to-face education. Conclusions: Promoting clinical Korean medicine as a non-face-to-face education has generally been positively evaluated in terms of efficiency and overall, and its use should be expanded in the future. In particular, it will be necessary to use non-face-to-face education in the theory classes of clinical Korean medicine. However, technical problems involving internet, video, equipment, and communication tools will need to be improved in the future.

• Journal of the Korean Statistical Society
• /
• 제24권1호
• /
• pp.111-125
• /
• 1995

Let $F_1$ and $F_2$ be two F ratios with independent numerators and a common denominator. They are known to be positively dependent. The probabilities of simultaneous rejection and conditional rejection are numerically computed for both null and nonnull cases. The probabilities are presented in tables and graphics to show the influence of the seven parameters, the degrees of freedom of the numerators and the denominator, the non-centralities of the numerators, and the two levels of significance of the tests. The values of the correlation coefficient between $F_1$ and $F_2$ are also presented. Finally, a conjecture on the dependence order of the family of distributions of $(F_1, F_2)$ is given.