• 제목/요약/키워드: Non-residual fraction

검색결과 23건 처리시간 0.023초

서남해안 연근해저 퇴적물의 중금속 함량 및 분포 (Some heavy metal concentration of surface sediments from the southwestern coast of Korea)

  • 전수경;조영길
    • 한국환경과학회지
    • /
    • 제11권12호
    • /
    • pp.1299-1305
    • /
    • 2002
  • Thirty sediment samples of the <63${\mu}{\textrm}{m}$ fraction collected from the southwestern coast of Korea were analysed for their heavy metal (Fe, Mn, Cr, Co, Cu, Ni, Zn and Pb) concentration. The results show that sediment texture plays a controlling role on the total metal concentrations and their spatial distribution. A single lM HCl extraction procedure was used in order to assess the environmental risk of heavy metals in bottom sediments. The non-residual fraction was the most abundant pool for Mn and Pb in most samples, which means that this metals are highly avaliable in these sediments. Cr, Ni, Fe, Co, Zn and Cu were mainly associated with the residual fraction, suggesting that their concentrations are controlled significantly by transport processes with the fine particles as carriers from diffuse pollution source. Concentration enrichment ratios(CER) were calculated from the non-residual contents and their values allowed us to classify the sediments according to their environmental risk.

A Study on Chemical Speciations and Leaching Potential of Heavy Metals in Polluted Wastes Soils

  • Kim Hee-Joung;Yang Jae-E;Park Byung-Kil;Kong Sung-Ho;Lee Jai-Young;Jun Sang-Ho
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제10권3호
    • /
    • pp.1-8
    • /
    • 2005
  • 석탄저장소, 텅스텐 광산의 광미, 고철 제련장내의 오염된 토양을 대상으로 중금속의 존재형태와 용출 가능성에 대하여 조사하였다. 석탄저장소와 광미, 제련장 지역 내 토양의 중금속 농도는 논과 비 오염지역의 산 토양보다는 높게 나타났으며, 대부분의 중금속의 존재형태는 reducible, organic과 residual fraction이 높게 나타났다. 오염되지 않은 토양의 중금속의 존재형태는 residual 형태가 주를 이루었다. 용출 가능성에 대한 평가는 오염되지 않은 토양보다는 오염된 토양에서 높게 나타났으며, pH 7.0 보다는 pH 4.0에서 시간이 증가함에 따라 용출량이 증가하였다. 오염 된 토양으로부터 중금속의 용출은 Cu, Zn, Pb 등이 용출시간이 25시간 또는 35시간에 유사 평형에 도달했다. 오염되지 않은 토양의 낮은 용출은 중금속의 존재형태 중 높은 residual fraction의 비율에 의해 기인된 것으로 사료된다.

부산 신항만 준설퇴적물로부터 중금속의 연속추출에 관한 연구 (A Study on Sequential Extraction of Heavy Metals from Marine Dredged Sediment at Busan New Port)

  • 김명진;장미정
    • 대한환경공학회지
    • /
    • 제33권2호
    • /
    • pp.93-102
    • /
    • 2011
  • 본 연구에서는 부산신항만 준설퇴적물에 포함된 중금속의 총농도, 이동성, 생체이용률, 독성을 알아보기 위하여 총함량분석과 연속추출실험을 실시하였다. 준설퇴적물의 중금속 총농도는 다음과 같이 비교적 낮았다: Al (2.36~2.96 wt.%), As (1.6~3.3 mg/kg), Ba (30.0~33.8 mg/kg), Cd (0.12~0.18 mg/kg), Cr (27.5~35.0 mg/kg), Cu (11.3~15.0 mg/kg), Fe (2.91~3.51 wt.%), Mn (324~408 mg/kg), Ni (18.8~23.8 mg/kg), Pb (23.8~31.3 mg/kg), Zn (70.0~86.3 mg/kg). 또한 대부분의 중금속이 residual fraction으로 존재하였는데, 이는 오염원이 자연발생적일 가능성이 높음을 의미한다: Al (87.5~95.9%), As (74.1~93.8%), Ba (71.8~77.6%), Cr (69.5~94.3%), Cu (50.0~78.7%), Fe (70.8~87.6%), Ni (64.5~75.3%), Pb (53.4~64.3%), Zn (62.5~81.7%). 반면에 Cd과 Mn은 주로 non-residual fraction으로 존재했다. 준설퇴적물의 유해중금속 농도가 낮고 residual fraction 비율이 높기 때문에, 이를 벽돌, 도로포장재료 등으로 재활용하는 것이 가능하다고 사료된다.

동진강 해역 표층 퇴적물 중 인의 화학적 형태별 함량 (Fractions of Phosphorus in the Surficial Sediment of Dongjin Sea Area)

  • 이현정;손재권;박봉주;조재영
    • 농촌계획
    • /
    • 제11권4호
    • /
    • pp.25-31
    • /
    • 2005
  • The present study was carried out to investigate the P fractions of surfical sediment of Dongjin sea area. Furthermore, potential released loading of adsorbed and non-apatite inorganic phosphorus were investigated in the sediment of Dongjin sea area. The contents of phosphorus fractions of the surficial sediment in Dongjin sea area were adsorbed-P 0.06%, nonapatite inorganic-P 13.02%, apatite-P 60.22%, and residual-P 26.70%. The most abundant fraction was apatite-P, residual-P, nonapatite inorganic-P, and adsorbed-P followed it. Potential released loading of adsorbed and non-apatite inorganic phosphorus surveyed 2.6 and 597ton respectively. These results show that sediment-managing and interception from external pollution are needed for water environmental maintenance of Dongjin sea area.

Biodegradation of diesel oil and n-alkanes (C18, C20, and C22) by a novel strain Acinetobacter sp. K-6 in unsaturated soil

  • Chaudhary, Dhiraj Kumar;Bajagain, Rishikesh;Jeong, Seung-Woo;Kim, Jaisoo
    • Environmental Engineering Research
    • /
    • 제25권3호
    • /
    • pp.290-298
    • /
    • 2020
  • A large residual fraction of aliphatic components of diesel prevails in soil, which has adverse effects on the environment. This study identified the most bio-recalcitrant aliphatic residual fraction of diesel through total petroleum-hydrocarbon fractional analysis. For this, the strain Acinetobacter sp. K-6 was isolated, identified, and characterized and investigated its ability to degrade diesel and n-alkanes (C18, C20, and C22). The removal efficiency was analysed after treatment with bacteria and nutrients in various soil microcosms. The fractional analysis of diesel degradation after treatment with the bacterial strains identified C18-C22 hydrocarbons as the most bio-recalcitrant aliphatic fraction of diesel oil. Acinetobacter sp. K-6 degraded 59.2% of diesel oil and 56.4% of C18-C22 hydrocarbons in the contaminated soil. The degradation efficiency was further improved using a combinatorial approach of biostimulation and bioaugmentation, which resulted in 76.7% and 73.7% higher degradation of diesel oil and C18-C22 hydrocarbons, respectively. The findings of this study suggest that the removal of mid-length, non-volatile hydrocarbons is affected by the population of bio-degraders and the nutrients used in the process of remediation. A combinatorial approach, including biostimulation and bioaugmentation, could be used to effectively remove large quantities of aliphatic hydrocarbons persisting for a longer period in the soil.

Analysis of the Esterification Process for Poly(ethylene terephthalate)

  • Ahn, Young-Cheol;Park, Soo-Myung
    • Macromolecular Research
    • /
    • 제11권6호
    • /
    • pp.399-409
    • /
    • 2003
  • The first esterification reactor in the continuous polymerization of poly(ethylene terephthalate) has been analyzed by solving the material balances for the two-phase system with respect to the solubility of terephthalic acid. The Newton-Raphson method was used to solve the material balance equations instead of the Simplex method that is frequently used for finding a minimum point of a residual rather than a solution of an equation. A solution for the material balance equations, with the constraint of non-zero liquid phase fraction, could not be obtained with the solubility data of Yamada et al., but could be obtained with solubilities over a minimum value that is larger than their data. Thus, the solubility data of Yamada et al. are considered to be too small. On the other hand, the solubility data of Baranova and Kremer are so large that they gave a solution with the liquid phase only. Based on our results, several typical solubility curves satisfying the constraint of a non-zero liquid phase fraction are suggested in this study; we studied the reaction characteristics of the system using these curves. A higher temperature and a lower pressure are preferred for reducing the content of diethylene glycol.

SUS304N 코일 웨지 인발 공정의 설계, 제조 및 평가 (Process Design, Fabrication, and Evaluation of Cold Drawn SUS304N Coil Wedge)

  • 정중은;김세종;배성준;남궁정;김성민;김성인;이광석
    • 소성∙가공
    • /
    • 제28권4호
    • /
    • pp.212-218
    • /
    • 2019
  • In this study, the first drawing die for the production of coil wedge is redesigned in order to enhance properties such as dimensional accuracy, dimensional uniformity, non-magnetism, and residual stress. The equivalent strain distribution is observed to be asymmetric at certain corners of the product and un-filling of material is also observed at the same location, based on the results of FEM simulation for the current drawing process. Additionally, a relatively huge amount of deformation is concentrated on the surface of the reference product leading to an increase in magnetic component and surface residual stress. After re-designing the cross-section of the first drawing step process conformed to relatively higher amount of reduction ratio, reduction of both surface residual stress and the volume fraction of magnetic component could be achieved for the finally-drawn coil wedge product.

강원도 폐금속광산지역의 광미와 주변토양의 중금속 오염현황 및 오염도 평가 (Assessment of Pollution Level and Contamination Status on Mine Tailings and Soil in the Vicinity of Disused Metal Mines in Kangwon Province)

  • 김정대
    • 대한환경공학회지
    • /
    • 제27권6호
    • /
    • pp.626-634
    • /
    • 2005
  • 본 연구에서는 강원도내 4개의 폐금속광산에서 발생되는 광미와 주변 토양의 중금속 오염현황 및 오염도를 평가하였다. 광미와 주변 토양의 오염정도는 총 중금속농도 기준으로 원동>제2연화>신예미${\fallingdotseq}$상동 순이었으며, 이들 광미는 배경토양 및 Kloke 값보다 각각 $1.2{\sim}78.2$$1.1{\sim}80.6$배가 높은 농도로서 주변 토양을 오염시키고 있었다. 광미내 대다수 중금속의 화합물형태는 잔류성이 대부분이었다. 비잔류형태 화합물에서는 상당부분이 환원성과 산화성이어서 장기간에 걸쳐 산화환경조건에 따라 중금속이 유출될 것으로 보이며 특히, 제2연화의 Cd은 교환성과 탄산염 화합물이 쉽게 유출되어 단기간에 주변 환경을 오염시킬 가능성이 클 것으로 판단된다. 우리나라 토양오염기준치의 초과여부 검토결과 많은 시료에서 토양환경보전법의 우려기준 및 대책기준 이상인 것으로 나타나 이에 대한 처리대책이 필요하였다. PI에 의한 오염도평가에서는 4개의 광산지역 모두 1.0 이상보다 훨씬 높아 오염정도가 심각하였으며 복원시 최우선 광산은 원동이었다. 또한, DI에 의한 복원수준정도 평가결과에서 원동광산은 단기간에 유출 가능한 교환성부터, 나머지 광산은 중 장기간에 걸쳐 유출되는 환원성부터 우선적으로 제거해야 할 것으로 나타났다.

양이온-비이온 혼합계면활성제의 첨가가 영가철을 이용한 TCE환원에 미치는 영향 (Effect of Surfactant on Reductive Dechlorination of Trichloroethylene by Zero-Valent Iron)

  • 신민철;최현덕;양중석;백기태
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제12권6호
    • /
    • pp.38-45
    • /
    • 2007
  • 트리클로로에틸렌(trichloroethyele, TCE)는 지하 환경으로 누출되었을 경우 대표적인 고밀도 불용성 유체(dense non aqueous phase liquids, DNAPLs)를 형성하여 토양과 지하수를 오염시키며, 계면활성제를 이용한 SEAR(Surfactant-enhanced aquifer remediation) 공법으로 처리를 하여도 소량이 계면활성제와 함께 지하수에 존재한다. 본 연구에서는 SEAR공법으로 처리 후 잔존하는 TCE가 계면활성제와 함께 존재할 때, 영가철(zero valent iron, ZVI)로 이루어진 투수성 반응벽체(PRB)에서의 TCE 거동을 조사하였다. 특히 계면활성제의 독성과 반응속도의 영향을 고려하여 양이온과 비이온 혼합 계면활성제의 영향을 중점적으로 다루었다. 혼합 계면활성제를 사용할 경우 ZVI를 이용한 TCE의 분해는 계면활성제의 구조에 따라 상당히 다른 경향을 보였다. TCE의 제거율을 살펴보면 비이온 계면활성제의 친수성기인 polyoxyethylene(POE) 사슬이 짧을 경우 양이온 계면활성제와 상관없이 거의 일정하였고, 상대적으로 긴 POE사슬일 경우 양이온 계면활성제의 종류와 첨가량에 따라 차이가 발생하였다. 친수성기가 트리메틸암모늄 (trimethylammonium)인 양이온 계면활성제가 피리디늄(pyridinium)를 가지는 양이온 계면활성제보다 더 높은 TCE 제거율을 보였다. 이러한 연구결과는 SEAR 후처리를 위해 PRB 적용시 잔존하는 계면활성제의 영향을 살펴보았으며 실제 현장적용의 중요한 자료로 이용될 수 있을 것으로 사료된다.

디젤기관의 연소실내 NO 생성농도 예측에 관한 연구 (A Study on the Calcuation of NO Formation in Cylinder for Diesel Engines)

  • 남정길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제23권4호
    • /
    • pp.543-551
    • /
    • 1999
  • Diesel engine is a major source of the air pollution. In general the concentrations of these pollu-tants in diesel engine exhaust differ from values calculated assuming chemical equibrium. Thus the detailed chemical mechanisms by which these pollutions form and the kinetic of these process-es are important in determining emission levels. In this study the computer program has been developed to calculate the required thermodynam-ic properties of combustion products(10 spacies) for both equilibrium and non-equilibrium in cylin-der for diesel engines. Nitric oxide emissions are calculated by using the extended Zeldovich Kinet-ic mechanism with a steady state assumption for the N concentration and equilibrium values used for H, O, $O_2$ and OH concentrations. By the results it is confirmed that developed simulations program with the NO prediction model is validated against residual mass fraction combustion index of Wiebe's functions pre-mixed com-bustion ration fuel injection timing.

  • PDF