• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.3
• /
• pp.236-243
• /
• 1995

Since amorphous alloys have been known to have better mechanical and chemical properties than crystalline alloys of the same composition, a great number of studies on the formation of Al-based amorphous alloys have been carried out actively. However, little has been obtained about the effect of Rare-Earth metal and Transition metal addition on amorphous phase formed by melt spinning method. This study included fabrication of amorphous alloy $Al_{85}Ce_5Ni_{10}$ by melt spinning methods and DTA, XRD, TEM analysis to determine crystalization behavoir. Annealing treatments were carried out in Ar atmosphere under isothermal and nonisothermal conditions. The diffraction pattern of non-heated ribbons showed broad form characteristic of glass metallic alloy. The crystallization of amorphous $Al_{85}Ce_5Ni_{10}$ takes place eutedtoidly by homogeneous formation of Al and MS-1, followed by precipitation of the $Al_{11}Ce_3$ and later $MS-1{\rightarrow}Al_3Ni$ transformation.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.3
• /
• pp.273-278
• /
• 2007

Modern society has moved from a phosphorus recycling loop, where animal manure and human wastes were spread on farming land to recycle nutrients, to a once-through system, where phosphates are extracted from mined, non-renewable phosphate rock and end up either in landfill(sewage sludge, incinerator ash) or in surface waters. In this research, crystallization of nitrogen and phosphate with natural sources of $Mg^{2+}$ in synthetic water was tested. The operational parameters of pH, mixing time, and the magnesium molar ratio were investigated to find optimal conditions of the MAP precipitation using synthetic wastewater. The removal efficiency of phosphate increased with pH up to 11. By MAP precipitaiton of the synthetic waste water, 94% of the phosphate were eliminated at pH 11. It was found that at least 10 minutes mixing time was required and 20 minutes mixing time was recommended for efficient phosphate removal. High efficiency removal of phosphate was possible when the magnesium molar ratio was 1.0~2.0. The comparative study of different magnesium sources showed that coagulants (PAC) was the more efficient sources than only magnesium. The result showed that 97% of phosphate removal. In conclusion, coagulants (PAC) induced crystallization of struvite and hydroxyapatite was shown to be a technically viable process that could prove cost effective for removing phosphate in wastewater.

• Korean Journal of Materials Research
• /
• v.23 no.9
• /
• pp.525-530
• /
• 2013

This study investigated the continuous cooling transformation, microstructure, and mechanical properties of highstrength low-alloy steels containing B and Cu. Continuous cooling transformation diagrams under non-deformed and deformed conditions were constructed by means of dilatometry, metallographic methods, and hardness data. Based on the continuous cooling transformation behaviors, six kinds of steel specimens with different B and Cu contents were fabricated by a thermomechanical control process comprising controlled rolling and accelerated cooling. Then, tensile and Charpy impact tests were conducted to examine the correlation of the microstructure with mechanical properties. Deformation in the austenite region promoted the formation of quasi-polygonal ferrite and granular bainite with a significant increase in transformation start temperatures. The mechanical test results indicate that the B-added steel specimens had higher strength and lower upper-shelf energy than the B-free steel specimens without deterioration in low-temperature toughness because their microstructures were mostly composed of lower bainite and lath martensite with a small amount of degenerate upper bainite. On the other hand, the increase of Cu content from 0.5 wt.% to 1.5 wt.% noticeably increased yield and tensile strengths by 100 MPa without loss of ductility, which may be attributed to the enhanced solid solution hardening and precipitation hardening resulting from veryfine Cu precipitates formed during accelerated cooling.

• Korean Journal Plant Pathology
• /
• v.10 no.3
• /
• pp.197-210
• /
• 1994

This experiment was carried out to study the cause of degeneration and rot of cultivated mushroom. Among 597 bacterial isolates derived from the rots of Button mushroom (Agaricus bisporus), Oyster mushroom (Pleurotus ostreatus) and Oak mushroom (Lentinus edodes) collected from markets of 5 cities (Seoul, Suwon, Taegu, Pohang and Pusan) in Korea (1991~1993), 111 bacterial isolates (18.5%) were proved as pathogenic bacteria. These pathogenic bacteria causing bacterial rots of cultivated mushrooms were identified as Pseudomonas tolasii, P. agarici, and Eriwinia sp., and the main causal bacteria were P. tolaasii. P. fluorescens and Klebsiella plenticola were confirmed as saprophytic non-pathogenic bacteria. One hundred fifty nine isolates (Group No. 39) of the 486 saprophytic bacterial isolates were classified as P. fluorescens, and this species was most often found rot area of cultivated mushrooms. P. tolaasii, the causal organism of bacterial blotch, was classified into two groups; One group can be differentiated from the other by the formation of white precipitation band by white line reacting organisms of Pseudomonas Agar F media. P. tolaasii attacked the cultivated mushrooms relatively well at lower incubation temperature such as 5$^{\circ}C$, but P. agarici rarely attack at below 1$0^{\circ}C$. The temperature for the infection commercial cultivated mushrooms by P. agarici was higher than that of P. tolaasii. Optimum temperature for the infection of mushrooms by P. tolaasii and P. agarici were 2$0^{\circ}C$ and $25^{\circ}C$, respectively.

• Korean Journal of Environmental Agriculture
• /
• v.19 no.5
• /
• pp.370-374
• /
• 2000

At this study, the monitoring network of water quality was established in the agricultural watershed an area 14,960 ha of the central southwest of Korea. Loads of nitrogen and phosphorus by agricultural land use were quantified bases on total amounts of stream flow. The land were used as a lowland paddy, an upland and a forest about 12.14 % (1,815 ha), 5.17 % (773 ha) and 80.31 % (12,015 ha) of the area, respectively. For six months, from May 1 to October 31, 1999, the total precipitation was 970 mm and the total amount of stream flow was $80,281,000\;m^3$. In the load of agricultural non-point sources relevant to land use, total-N was 138,413 kg, then ammonia-N 13,362 kg, nitrate-N 124,629 kg, and total-P 157 kg. The loss of nutrient which from application of chemical fertilizer were 38.0% in nitrogen and 0.1% in phosphorus to input chemical fertilizer in the watershed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.1
• /
• pp.155-170
• /
• 2016

This study established the definition of invasive disturbance species for a sustainable management and biodiversity, and derived the influence factors caused by the species. To define the species, the paper reviewed similar words such as alien species and invasive species, using standard definitions. Also reviewed the results of recent research on the factors of the species. The paper defined the invasive disturbance species as an species whose establishment and spread threaten ecosystems, habitats or species with economic or environmental harm including native and non-native. Through the reviews, The factors were classified as geographic (altitude, slope, and soil, etc.), climate (temperature, precipitation, climate change, etc.) and, anthropogenic (land use, population, road, and human activity, etc.), and species & vegetation structure (species property, local-species richness, and canopy, etc.). Especially, human activity such as urbanization and highways may be associated with both higher disturbance and higher propagule pressure. In the further study, it is required development of mitigation strategies and vegetation structure model against invasive disturbance species in urban forest based on this study.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.3
• /
• pp.15-25
• /
• 2005

Ninety tow percent of over 1,800 gate controlled dams in Korea are classified as small dams. The primary purpose of these small dams is to supply irrigation water. Therefore, while large dams can store as much as 80 percent of precipitation and thus are efficient to control flood, small dams are often lack of flood control function resulting in increased susceptibility drought and flood events. The purpose of this study is to develope a storage management model for irrigation dams occupying the largest portion of small dams. The proposed Storage Management Model (STMM) can be applied to the Seongju dam for efficient management. Besides, the operation standard is capable of analyzing additional available water, considering water demand and supply conditions of watershed realistically. And the model can improve the flood control capacity and water utilization efficiency by the flexible operation of storage space. Consequently, if the small dams are managed by the proposed Storage management model, it is possible to maximize water resources securance and minimize drought and flood damages.

• Journal of Integrative Natural Science
• /
• v.10 no.4
• /
• pp.216-224
• /
• 2017

In the terrain of the Korean peninsula, mountainous and flat lands are complexly distributed in small areas. Therefore, local severe weather develops and disappears in a short time due to the influence of the terrain. Particularly in the case of local severe weather with heavy wind that has the greatest influence on aviation meteorology, the scale is very small, and it occurs and disappears in a short time, so it is impossible to predict with fragmentary data alone. So, we use weather radar to detect and predict local severe weather. However, due to the development of wireless communication services and the rapid increase of wireless devices, radio wave jamming and interference problems occur. In this research, we confirmed through the cases that when the radio interference echo which is one of the non-precipitation echoes that occur during the operation of the weather radar is displayed in the image, its form and shape are shown in a long bar shape, and have a strong dBZ. We also found the cause of the interference through the radio tracking process, and solved through the frequency channel negotiation and AP output minimizing. The more wireless devices increase as information communication technology develops in the future, the more emphasized the problem of radio wave interference will be, and we must make the radio interference eliminated through the development of the radio interference cancellation algorithm.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.521-527
• /
• 2017

Phosphorus is one of the limiting nutrients for the growth of phytoplankton and algae and is therefore one of leading causes of eutrophication. Most phosphorous in water is present in the form of phosphates. Different technologies have been applied for phosphate removal from wastewater, such as physical, chemical precipitation by using ferric, calcium or aluminum salts, biological, and adsorption. Adsorption is one of efficient method to remove phosphates in wastewater. To find the optimal media for phosphate removal, physical characteristics of media was analysed, and the phosphate removal efficiency of media (silica sand, slag, zeolite, activated carbon) was also investigated in this study. Silica sand showed highest relative density and wear rate, and phosphate removal efficiency. Silica sand removed about 36% of phosphate. To improve the phosphate removal efficiency of silica sand, Fe coating was conducted. Fe coated silica sand showed 3 times higher removal efficiency than non-coated one.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.09b
• /
• pp.1179-1180
• /
• 2005

To immobilize the pollutants from wastewater in situ, two phosphatic clays collected from different areas in Egypt (eastern and western Sebaia, Aswan-Isna, Upper Egypt) used to remove contaminant ions from industrial wastewater. Obtained results confirmed the strong relationship between phosphatic clay and Pb elimination from wastewater. The sensitivity classification of phosphatic clay toward ions retained as described in three categories: highly sensitive to retain Pb , Al and Cr ; moderately sensitive for Mn; and weakly sensitive for Band Zn. Data suggested that large fraction of Pb removed by phosphatic clays stayed intact under a wide variation in extracting solution pH (3-11). In situ immobilization is considered a promising technique that has the potential to remove contaminant ions from wastewater. Two important factors need to be considered when applying this technique: The first, is the clay must be effective and selective under different composition of wastewater. The second, is the immobilized ions should be stable and non-leacheable under varying water conditions. Phosphatic clays with $Pb^{2+}$ were suitable to achieve these two factors. Possible mechanism for removal $Pb^{2+}$ by phosphatic clays is the formation of fluoropyromorphite through the dissolution of fluoro and hydroxyl apatite by its precipitation from solution, beside, Pb complexation at phosphatic clay surface at P-OH sites.