• 상하수도학회지
• /
• 제20권5호
• /
• pp.709-717
• /
• 2006

This research was conducted to figure out the feasibility of several sorption materials to treat various pollutants in road runoff. In advance of the major feasibility test with various sorption materials, the separation process with $1.2{\mu}m$ filter was conducted and showed that slight portion of pollutants was removed(Orgamic pollutant - 20%, Nutrient salt - 50%, Heavy metals - 0~30%). To remove dissolved pollutants in runoff, various materials were tested through an isotherm sorption experiment. As a result, GAC showed most effective material among them to lessen most contaminants such as organic compounds and nutrients. On the other hand, ion-exchange resin and Zeolite showed limited usefulness on the some heavy metals. Freundlich model was most suitable for the current experiment data, and the amount of adsorbent (GAC) could calculated based on this model.

• 한국물환경학회지
• /
• 제23권4호
• /
• pp.429-433
• /
• 2007

Many researchers have made a study of NPS unit-loads and the scientific evaluation method which need for formulating and enforcing a Total Maximum Daily Load (TMDL) management system and modifying a pollutant discharge loadings function. Some showed the event mean concentration (EMC) on single land-use. For the most parts, as the results showed on multiple land-uses, those cannot be used for NPS unit-loads calculation. NPS runoff shows various phenomena depending on rainfall monitoring data, therefore sampling methods and frequency for NPS monitoring must be different from the general monitoring for water quality trend assessment.

• 한국농공학회논문집
• /
• 제54권6호
• /
• pp.53-63
• /
• 2012

The objectives of this study were to develop a linked watershed-waterbody modeling system and to assess the impacts of indirect wastewater reuse on irrigation water quality. The Osan stream watershed within Gyeonggi-do of South Korea was selected for this study. The linked modeling system was composed of the SWAT (Soil and water assessment tool) and QUALKO2 models. The SWAT model was calibrated and validated using the stream discharge and water quality data from 2010 to 2011. Runoff and non-point source pollutants from each subbasin and stream discharge from 1980 to 2009 were simulated by the SWAT model and applied to the QUALKO2 model. The QUALKO2 model was calibrated and validated under the conditions of low water and normal discharges, respectively. Finally, The 10-day irrigation water quality from April to September was simulated. The statistical measures of coefficient of determination ($R^2$), reliability index (RI), and efficiency index (EI) were used to evaluate the system performance. The $R^2$, RI and EI values ranged from 0.5 to 1.0, 1.03 to 1.92, and -35.03 to 0.95, respectively. The 10-day irrigation water quality showed the concentrations of BOD and coliform exceeded the water quality guidelines for wastewater reuse. The linked modeling system can be a useful tool to estimate non-point source pollutant loads in watershed and to control the water quality of effluent from a wastewater treatment plant and irrigation water in the downstream waterbody.

• 한국물환경학회지
• /
• 제25권5호
• /
• pp.682-688
• /
• 2009

A plane field and a sloped field located at low-land plane and alpine areas, respectively, were monitored with respect to runoff, water quality and fertilizer uses from March to December, 2008. Runoff volume and Non-Point Source (NPS) loads were estimated and analyzed with respect to fertilizer uses. Total TN and TP loads from the sloped field were higher than those from plane field because of larger chemical uses in the alpine field than in the plane field. Organic matter load from plane field was higher than that from sloped field because more organic compost was applied to plane field than to sloped field. Event Mean Concentration (EMC) of measured water quality indices were relatively higher in both fields. Organic matter load per 1 mm rainfall were higher in plane field and TN and TP loads per 1 mm rainfall were higher in sloped field than those in respective comparing field. It was concluded that the type and application method of fertilizer could play an important role in the estimation of NPS pollution loads and the development of Best Management Practices (BMPs). However, it was recommended that long-term monitoring is necessary to better describe the relationship between fertilizer uses and water quality from agricultural fields because numerous natural and management factors other than fertilizer also affect runoff quality.

• 한국습지학회지
• /
• 제14권4호
• /
• pp.479-488
• /
• 2012

본 연구에서는 비점오염물질을 효과적으로 처리하기 위해 주암호 상수원 상류지역에 위치한 복내 바이오파크 인공습지를 대상으로 2006년 1월부터 2010년 12월까지 5년간 수질정화효율을 평가하였다. 월별 오염물질의 처리효율을 분석한 결과 BOD는 -19.11~37.72% 범위, COD는 -30.14~27.38% 범위로 BOD 보다 상대적으로 월별 편차가 높게 나타났고 SS는 -54.07~64.82% 범위로 나타났다. 그리고 계절별 오염물질의 처리효율을 분석한 결과 TN의 처리효율은 봄과 겨울이 5년간 평균 36.8%보다 높게 나타났으며, TP의 평균 처리효율은 다른 오염물질에 비해 상대적으로 낮았지만, 계절적 영향을 거의 받지 않는 것으로 나타났다.

• 환경영향평가
• /
• 제21권2호
• /
• pp.315-325
• /
• 2012

The characteristics of stormwater runoff and estimation of unit loads were examined in suburban industrial complex areas. During rainfall event, the peak concentrations occurred within the first 100 minutes after rainfall and then the highest concentration of NPS pollutants sharply decreased, showing strong first flush effect in suburban industrial complex. The cumulative load curves for NPS pollutants showed above the straight line, indicating that first flush effect occurred in suburban industrial complex. While the mean TSS, BOD, COD, TN and TP EMCs values were shown the highest values as 120.6 mg/L, 20.8 mg/L, 44.0 mg/L, 5.58 mg/L and 1.46 mg/L respectively. Unit loads estimated from the EMCs were TSS $43.86kg/km^2/day$, COD $52.45kg/km^2/day$, BOD $24.79kg/km^2/day$, T-N $6.65kg/km^2/day$, T-P $1.75kg/km^2/day$, and Pb $0.10kg/km^2/day$. Results of unit loads were compared with the unit pollutant loads from land-use in Korea and USA. The unit load of TSS was lower than that of USA. Estimated BOD and T-N and T-P unit loads were lower than that of Korea.

• 한국물환경학회지
• /
• 제35권6호
• /
• pp.470-480
• /
• 2019

The Doam lake watershed was designated as a non-point pollution management area in 2007 to improve water quality based on watershed management implementation. There have been studies of non-point source reduction with respect to the watershed management impacting the pollutant transport of the reservoir. However, a little attention has been focused on the impact of water quality improvement by the management of the dam operation or the guidelines on the dam operation. In this study, the impact of in-lake management practices combined with watershed management is analyzed, and the appropriate guidelines on the operation of the dam are suggested. The integrated modeling system by coupling with the watershed model (HSPF) and reservoir water quality model (CE-QUAL-W2) was applied for analyzing the impact of water quality management practices. A scenario implemented with sedimentation basin and suspended matter barrier showed decrease in SS concentration up to 4.6%. The SS concentration increased in the scenarios adjusting withdrawal location from EL.673 m to the upper direction(EL.683 m and EL.688 m). The water quality was comparably high when the scenario implemented all in-lake practices with water intake at EL.673 m. However, there was improvement in water quality when the height of the water intake was moved to EL.688 m during the summer by preventing sediments inflow after the rainfall. Therefore, to manage water quality of the Doam lake, it is essential to control the water quality by modulating the height of water intake through consistent turbidity monitoring during rainfall.

• 상하수도학회지
• /
• 제27권6호
• /
• pp.761-770
• /
• 2013

This study was carried out to forecast the flow rate and water quality at the inlet of the Saemangeum bay in Korea using the SWMM(Storm Water Management Model) and the WASP(Water Analysis Simulation Program), and to analyze the impacts of pollutant loading from non-point source on the water quality of the bay. The calibration and validation of flow rate and water quality were performed using those from two monitoring points in the Mankyeong river administrated by Korean Ministry of Environment as part of the national water quality monitoring network. When the river flow rate was calibrated and validated using the rainfall intensities during 2011-2012, $R^2$ (i.e., coefficient of determination) was ranged from 0.91 to 0.96. For water qualities, it was shown that $R^2$ of BOD(Biochemical Oxygen Demand) was ranged from 0.56 to 0.86, and $R^2$ of T-N(Total Nitrogen) was from 0.64 to 0.75, and $R^2$ of T-P(Total Phosphorus) was from 0.67 to 0.89. The integrated modeling system showed significant advances in the accuracy to estimate the water quality. Finally, further simulations showed that annual average flow of the river running into the bay was estimated to be $1.439{\times}10^9m^3/year$. The discharged load of BOD, T-N, and T-P into the bay were anticipated to be 618.7 ton/year, 331.5 ton/year, and 40.4 ton/year, respectively.

• Spatial Information Research
• /
• 제9권2호
• /
• pp.291-307
• /
• 2001

오늘날 환경공학분야에서는 지표상의 유체와 오염물질 흐름에 대한 화학적·생물학적 프로세스를 보다 정확하고 효과적으로 파악하기 위하여 GIS 기법을 적용하는 연구가 활발히 진행되고 있다. 그러나, 공간적으로 표현되는 지표오염부하와 호수·하천 프로세스 간의 연계는 상대적으로 미흡한 실정이다. 이러한 연속성의 부재로 인하여 공간적인 오염원 특성과 수질모델의 연계 방안이 요구되고 있다. 본 연구의 목적은 GIS 소프트웨어인 Arcview와 USEPA의 수질 모델인 WASP5를 양방향으로 연계하여 오염부하와 수질모델의 입·출력 관계를 구현하는 것이다. 연구의 범위는 연구 동향 및 사례 분석, GIS를 이용한 점오염부하 및 비점오염부하 산출, WASP5 모델링, GIS와 모델의 연계 등을 포함한다. 본 연구는 GIS를 이용한 전처리(수질모델 입력 자료 생성), WASP5 수질 모델링, GIS를 이용한 후처리(수질 모델링 결과 출력)의 절차로 수행되었다. 전처리 단계에서는 소유역별 오염부하량을 산정한 후, 격자 분석 등을 통하여 모델링의 기본 단위가되는 세그먼트를 분할하고 각 세그먼트로 유입되는 경계농도를 산출하였다. 그리고 WASP5 수질 모델링 단계에서는 실측치를 이용하여 모델을 보정하고 모델링 결과를 분석하였다. 마지막으로 후처리 단계에서는 모델 결과를 GIS 형태의 자료로 변환하고, 이를 그래프나 주제도 형태로 표현하였다. 본 연구에서 구현된 인터페이스는 수질 관리를 위한 기본적인 환경을 제공하기 때문에 수질 정책 수립이나 의사 결정에 효과적으로 사용될 수 있을 것으로 기대된다.

• 한국습지학회지
• /
• 제12권3호
• /
• pp.39-47
• /
• 2010

최근 우리나라 농경지 면적은 해마다 감소하고 있는 추세이나 이러한 농업지역으로부터 발생되는 오염부하량은 오히려 증가하고 있는 실정이다. 농업지역으로부터 발생되는 오염물질 중 대부분은 비점오염원에 의해 배출되며 이는 주로 저농도이면서 넓은 지역에서 대량으로 배출되는 특성을 보인다. 본 연구의 목적은 농업지역 내 비점오염원을 관리하기 위한 방안으로 인공습지를 적용하여 수질정화효율을 분석함으로써 인공습지 적용가능성과 오염물질 제거기작, 설계인자 등을 제공함에 있다. 모니터링 결과를 토대로 수질분석을 실시하였으며 분석 결과, 유입수의 평균 농도 제거율은 TSS가 26 %, BOD가 28 %, TN이 16 %, TP가 39 %로 나타났다. 또한 국내 하천수질기준에 준하여 인공습지 유입수과 유출수의 수질을 비교해 본 결과 대부분의 항목에서 수질등급이 향상되었다.