• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2495-2500
• /
• 2008

We simulated the mixing characteristics in micro T-channel using Lattice Boltzmann Method. We studied the relation a mixing length and pressure-drop due to inlet and outlet ration in Reynolds number 0.5, Peclet number 500 and Schmidt 1000. The ratio of a down-inlet to up-inlet was $0.5{\sim}1.5$ times, up-inlet to outlet was $1{\sim}3$ times and outlet length was 250 times to up-inlet. The mixing length decrease linearly as outlet ratio decreased, and pressure-drip increase non-linearly. Initial stage of micro channel mixture was fast by down-inlet ratio, however, the mixing length is not influence.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.357-389
• /
• 1987

In an attempt to clarify the physiological functions of individual isoperoxidases, we have studied enzymatic and immunological properties as well as cellular distribution of isoperoxidases from tobacco callus and Korean radish. The gene expression patterns of isoperoxidases in shoot and non-shoot-forming tobbaco callus were also examined by rabbit reticulocyte lysatein vitro translation system. These results indicate that fraction of translatable poly(A)-isoperoxidase mRNA was increased considerably in shoots. At the present time, at least 6-7 isoperoxidases could be detected from the translation mixture of total cellular RNA, among which only one cell wall localized anodic isoperoxidase (named A3) mRNA was bimorphic mRNA. These data suggest the possible regulation of peroxidase activity during shoot formation by altering the polyadenylation state of mRNA. In case of Korean radish seedlings, poly(A)- peroxidase mRNA were also increased depending upon aging.

• YAKHAK HOEJI
• /
• v.22 no.4
• /
• pp.219-225
• /
• 1978

From the dried roots of Caragana chamlagu Lamarck which have been known to be effective against neuralgia, arthritis, migraine, and sputum, etc. in the folk medicines of Korea, a colorless sterol-like substance, C$_{29}H_{50}O$, m.p. $115-117^{\circ}$, was isolated from the non-saponified fraction of methanolic extract. It was confirmed to be a mixture of four sterols, namely cholesterol, brassicasterol, campesterol, and $\beta$-sitosterol by physico-chemical properties, ir, nmr, mass spectra and gas liquid chromatographic method with the comparison of the authentic samples. In mass fragments of four sterols, furthermore, the same ions of m/e 273, 255, 229 and 213 were assigned to fragments of stigmastane skeletons of the unsaturated phytosterol, and the characteristic ions of each sterol were observed 386, 371, 368, 353 in cholesterol, 398, 383, 380, 365, 355, 337 in brassicasterol, 400, 385, 382, 367 in campesterol and 414, 399, 396, 381 in $\beta$-sitosterol, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.201-204
• /
• 2004

The purpose of this study is recycling of sewage sludge and fly-ash. In this experiment, green aggregates, which is a mixture of sewage sludge and clay and fly-ash, with different content of sewage sludge (up to $80wt\%$). Then they were burned in different soak temperatures from $1190^{\circ}C\;to\;1290^{\circ}C$ with changed soak time and heating rate at 5, 7, 10 minutes and $20^{\circ}C/min$, $30^{\circ}C/min$ respectively in order to produce lightweight aggregate (LWA). Data of both experiment series were generated to evaluate the quality of LWA as well as the relationship between burning condition and product's quality.

• Preventive Nutrition and Food Science
• /
• v.9 no.4
• /
• pp.295-299
• /
• 2004

Alpha-tocopherol was thermally oxidized and degraded at high temperatures and the resulting products were chromatographically separated and identified by LC-MS. Alpha-tocopherol dissolved in glycerol was heated at 200^{\circ}C for 30 min. The thermal products were separated by hexane extraction and analyzed by HPLC using a reversed phase $\mu$-Bondapak $C_{18}-column$ with two kinds of elution solvents: a mixture of acetonitrile and methanol (3:2), and of acetonitrile, methanol, 2-propanol, chloroform and methylene chloride (3:2:5:0.5:0.5) in a gradient mode. The isolated thermal. products of alpha-tocopherol were more viscous than alpha-tocopherol, and dark brown in color. Major thermal degradation products of alpha-tocopherol were identified by LC-MS, and the structures of thermal products were proposed. Alpha-tocopherol and its thermal degradation products were degraded into fragments, mainly at the non-aromatic parts. The degradation products of alpha-tocopherol. were combined with oxidized product (tocopherylquinone) to make thermal. products through dimerization.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.2
• /
• pp.122-128
• /
• 2002

This study was conducted to synthesize the diamond like carbon films by plasma enhanced chemical vapor deposition (PECVD). The effects of gas composition on growth and mechanical properties of the films were investigated. A little amount of hydrogen or oxygen were added to base gas mixture of methane and argon. Methane dissociation and diamond like carbon nucleation were enhanced by installing negatively bias grid near substrate. The deposited films were indentified as hard diamond like carbon films by micro-Raman spectroscopy. The surface and fractured cross section of the films which were observed by scanning electron microscopy showed that film growth is very slow as about 0.3$\mu\textrm{m}$/hour, and relatively uniform with hydrogen addition. Vickers hardness of tungsten carbide (WC) cutting tool increased from about 1000 to 1600~1800 by deposition of DLC film, that of commercial TiN coated tool was about 1270. In cutting test of aluminum 6061 alloy, DLC coated cutting tool showed 1/3 or lower crater and flank wear than TiN coated or non-coated WC cutting tools.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.559-560
• /
• 2006

Powder forging is used for heavy-loaded parts (rings of rolling-contact bearings, gears etc.) production. Rolling contact fatigue is material property values of which characterize possibility of practical utilization of such parts. Rolling contact fatigue of some steels obtained out of prealloyed powders Astaloy CrM, Atomet 4601, Atomet 4901 and powder blends iron-carbon-nickel by hot forging is studied in the present paper. Effect of various kinds of heat and thermomechanical treatment on rolling contact fatigue is determined. Thermomechanical treatment provides optimal values of rolling contact fatigue. In this case steel structure contains up to 40% of retained metastable austenite which is transformed to martensite on trials. Thus typically crack is generated on residual pores and non-metallic inclusions instead of martensite zones in wrought steels.

• Journal of the Korean Society of Combustion
• /
• v.9 no.3
• /
• pp.19-26
• /
• 2004

This paper presents results of experimental study of flame chemiluminescence from turbulent premixed flames in a dump combustor. A detailed spectroscopic measurement of chemiluminescence over the wavelength of 405-495 nm is made for various flow conditions. No effect of turbulence on the relationship between chemiluminescence and heat release is found, suggesting the overall chemiluminescence intensity collected be used as a measure of overall heat release for non-oscillating stable flame. The background-$CO_2^*$ subtracted $CH^*$ chemiluminescence is found to be more sensitive to the equivalence ratio and premixedness of fuel-air mixture than $CO_2^*$ chemiluminescence.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.1
• /
• pp.33-38
• /
• 2002

In this study, the metastable state diamond thin films have been deposited on Si substrates from methane-hydrogen and oxygen mixture using microwave plasma enhanced chemical vapor deposition (MPCVD) method. Effects in experimental parameters of MPCVD including methane concentrations, oxygen additions, operating pressure, deposition time on the growth rate and crystallinity were investigated. Diamond thin film was synthesized under the following conditions: methane concentration of 0.5%(0.5sccm)~5%(5sccm), oxygen concentration of 0~80%(2.4sccm), operating pressure of 30Torr~70Torr, deposition time of 1~32hr. SEM, XRD, and Raman spectroscopy were employed to analyze the growth rate and morphology, crystallinity and prefered growth direction, and relative amounts of diamond and non-diamond phases, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.523-524
• /
• 2006

본 논문에서는 질소와 이산화탄소를 완충기체로 사용하는 경우의 혼합가스에 대해 가스절연설비 내부의 이물질에 의한 절연파괴특성을 모의하기 위한 침-평판 전극구조에서의 침전극 재질을 연철, 고탄소강, 스테인레스강 등으로 구성한 경우 혼합가스의 절연파괴 특성에서 나타나는 전극 재질에 의한 영향을 실험적으로 검토해 보았다. 실험 결과 연철제 전극과 고탄소강제 전극의경우에는 혼합가스의 절연파괴특성에서 유사한 N-특성이 나타남을 확인할 수 있었으나 스테인레스 강제 전극의 경우에는 다소 상이한 양상이 나타났다. $SF_6$계 혼합가스의 경우에는 순 $SF_6$의 경우와 동일하게 코로나 안정화작용에 의한 N-특성이 발현됨이 일반적인 특성으로 알려져 있으나 본 실험 결과에 의하면 침전극 재질에 따라 다소 상이한 양상이 나타날 수 있음을 관측하였다.