• 한국해양공학회지
• /
• 제22권2호
• /
• pp.20-27
• /
• 2008

A moon-pool is a vertical well in a floating barge, drilling ship, or offshore support vessel. In this study, numerical simulation of two-dimensional moon-pool flaw coupled with a ship's motion in waves is carried out using a particle method, the so-called MPS method. The particle method, which is recognized as one of the gridless methods, was developed to investigate nonlinear free-surface motions interacting with structures. The method is more feasible and effective than convectional grid methods in order to solve a flaw field with complicated boundary shapes.

• 한국해양공학회지
• /
• 제21권6호
• /
• pp.42-46
• /
• 2007

The impact of a single wave generated by a dam break with a tall structure is modeled with a three-dimensional version of the Moving particle semi-implicit (MPS) method. The particle method is more feasible and effective than methods based on grid connection problems involving violent free surface motions. In the present study, the Tsunami impact load and the change of longitudinal velocity component around the structure, which are obtained from the numerical simulation, are compared to those from experiments.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권10호
• /
• pp.1364-1368
• /
• 2010

Gnotobiotic piglets (n = 10) were hand-reared in conventional germ-free facilities. Piglet body temperatures were measured with rectal and non-contact infrared thermometry (NIFT) on the lower eyelid, auricular center and margin, parietal regions, axilla, central abdomen and dorsum, and the perianal region. Body temperature measurements at central abdomen, cranial dorsum, and perianal regions had NIFT values which had a significant linear relationship (p<0.0001) with rectal thermometry. The predicted equations of between-subject formulas were calculated as follows: rectal temperature, 28.07489+0.30372${\times}$central abdominal surface temperature; rectal temperature, 34.02799+0.15197${\times}$central dorsum surface temperature; and rectal temperature, 33.87937+0.15676${\times}$perianal temperature. These results suggested that NIFT could serve as a valid alternative to rectal thermometry in a portable germ-free facility without disturbing experimental animals. The development of a NIFT body temperature evaluation that does not require animal restraint is clinically advantageous, particularly in gnotobiotic piglets, and would be significantly less stressful for experimental procedures in germ-free facilities.

• International Journal of Fluid Machinery and Systems
• /
• 제4권1호
• /
• pp.33-46
• /
• 2011

Concave surface boundary-layer flows are subjected to centrifugal instability which results in the formation of streamwise counter-rotating vortices. Such boundary layer flows have been experimentally investigated on concave surfaces of 1 m and 2 m radius of curvature. In the experiments, to obtain uniform vortex wavelengths, thin perturbation wires placed upstream and perpendicular to the concave surface leading edge, were used to pre-set the wavelengths. Velocity contours were obtained from hot-wire anemometer velocity measurements. The most amplified vortex wavelengths can be pre-set by the spanwise spacing of the thin wires and the free-stream velocity. The velocity contours on the cross-sectional planes at several streamwise locations show the growth and breakdown of the vortices. Three different vortex growth regions can be identified. The occurrence of a secondary instability mode is also shown as mushroom-like structures as a consequence of the non-linear growth of the streamwise vortices. Wall shear stress measurements on concave surface of 1 m radius of curvature reveal that the spanwise-averaged wall shear stress increases well beyond the flat plate boundary layer values. By pre-setting much larger or much smaller vortex wavelength than the most amplified one, the splitting or merging of the streamwise vortices will respectively occur.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.449-474
• /
• 2010

A smart hollow cylinder consisting of a host functionally graded elastic core layer and two surface homogeneous piezoelectric layers is presented in this paper. The bonding between the layers can be perfect or imperfect, depending on the parameters taken in the general linear spring-layer interface model. The effect of such weak interfaces on free vibration and steady-state response is then investigated. Piezoelectric layers at inner and outer surfaces are polarized axially or radially and act as a sensor and an actuator respectively. For a simply supported condition, the state equations with non-constant coefficients are obtained directly from the formulations of elasticity/piezoelasticity. An approximate laminated model is then introduced for the sake of solving the state equations conveniently. It is further assumed that the hollow cylinder is embedded in an elastic medium and is simultaneously filled with compressible fluid. The interaction between the structure and its surrounding media is taken into account. Numerical examples are finally given with discussions on the effect of some related parameters.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.401-406
• /
• 2011

본 연구에서는 3차원 수치파동수조에서 무반사 조파시스템을 이용한 경사입사파의 조파방법을 새롭게 제안하고, 계산된 수면변위 및 수평유속에 대한 수치결과와 Stokes파의 3차 근사이론값과의 비교 분석을 통하여 새로운 모델의 검증을 실시하였다. 그 결과 본 연구에서 제안한 경사입사파의 조파방법의 타당성과 유효성을 확인할 수 있었다.

• 한국해안해양공학회지
• /
• 제14권2호
• /
• pp.171-181
• /
• 2002

최근, 구조물에 의한 쇄파를 수반한 다양한 파랑변형 해석법중에 자유수면의 추적기법인 VOF법을 이용한 수치해석기법이 각광을 받고 있다. 본 연구는 수중투과성구조물(잠제)에 의한 파랑변형 및 유속장의 해석을 위해 조파를 위한 line-source와 파의 재반사를 방지하기 위한 부가감쇠영역이 설치된 2차원수치파동수조에 잠제를 설치하고 구조물에 의한 파랑변형의 자유수면 추적을 위해 VOF법을 적용하였다. 2차원수치파동수조를 이용한 본 연구의 수치해석수법의 타당성 검증을 위해 수리실험을 실시하였으며 그 결과 본 수치해석결과와 잘 일치하였다. 일열잠제와 이열잠제에 대한 수치해석을 통해 잠제 주변 유속장 해석으로부터 일열잠제의 경우 배후에서 와가 발생하고 이열잠제의 경우 잠제사이와 잠제배후에서 와가 발생함을 확인하였으며 잠제의 천단상에서는 강한 비선형성분파가 발생하고 투과층내의 유속방향은 자유수면의 형상에 의해 좌우됨을 확인하였다

• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.187-212
• /
• 2015

In this paper, various four variable refined plate theories are presented to analyze vibration of temperature-dependent functionally graded (FG) plates. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations for the present model is reduced, significantly facilitating engineering analysis. These theories account for parabolic, sinusoidal, hyperbolic, and exponential distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Uniform, linear, nonlinear and sinusoidal thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from Hamilton's principle. Analytical solutions for the free vibration analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier's method). Non-dimensional results are compared for temperature-dependent and temperature-independent FG plates and validated with known results in the literature. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature fields on the vibration characteristics. It can be concluded that the present theories are not only accurate but also simple in predicting the free vibration responses of temperature-dependent FG plates.

• 한국항해항만학회지
• /
• 제30권10호
• /
• pp.869-875
• /
• 2006

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형 자유수면 경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상 방향 패널이동법을 사용하였고, 선체에 미치는 전 저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 건형인 Wigley선형과 Series 60(CB=0.6)선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.47-53
• /
• 2005

본 연구에서는 최적화기법과 전산유체역학의 기술을 이용하여 저항의 관점에서 최적의 형상을 가지는 선형을 개발하는 알고리즘을 개발하였다. 최적화기법으로는 SQP(sequential quadratic programming)을 사용하였으며, 목적함수인 저항을 구하기 위하여 먼저 조파저항은 비선형자유수면경계조건을 고려한 선체주위 포텐셜유동을 계산할 수 있는 수치해석기법인 상방향패널이동법을 사용하였고, 선체에 미치는 전저항을 구하기 위하여 ITTC 1957년 모형선-실선상관곡선을 이용하였다. 선형최적화 과정 중의 선체의 변경이나 계산 격자의 생성은 NURBS(Non-Uniform Rational B-Spline)기법을 사용하여 구현하였다. 이와 같은 방법을 사용하여 개발된 선형최적화 기법의 타당성을 검증하기 위하여 선형이 비교적 잘 알려진 선형인 Wigley선형과 Series 60(C${_B}$=0.6)hull 선형에 대하여 설계속도 Fn=0.316에서 선형최적화를 위한 수치해석을 수행하고 그 결과를 초기선형과 서로 비교하였다.