• 보존과학회지
• /
• 제33권1호
• /
• pp.43-49
• /
• 2017

류코쿠 대학 소장 "당백가시"를 중심으로 3D 디지털 현미경으로 인쇄된 종이 표면에 남아있는 금속활자의 미세표면을 관찰하여 굴곡구조와 표면 거칠기를 정량화하는 측정 방법을 소개하고자 한다. 인쇄된 종이 표면을 기준으로 활자 표면의 굴곡 현상을 선으로 측정하고 활자의 미세표면은 면으로 측정하여 수치화하여 인쇄된 종이 표면의 특성을 제시하였다. 3D 디지털 현미경 측정 방법은 비접촉, 비파괴 방법으로 많은 자료 분석과 반사광에 의한 직접 관찰이 가능하다. 그리고 클리닝이나 배접 그리고 주름을 펴기 위하여 강한 힘으로 압력을 주는 과정에서 고문서에 함유된 정보가 손실될 수 있으므로 사전 조사 방법으로 종이 표면에 남아있는 인쇄 정보를 수집하는데 유용한 방법이라고 할 수 있다.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.184-193
• /
• 2014

Purpose: The aim of this study was to develop a technique for the non-destructive and rapid prediction of the moisture content in red pepper powder using near-infrared (NIR) spectroscopy and a partial least squares regression (PLSR) model. Methods: Three red pepper powder products were separated into three groups based on their particle sizes using a standard sieve. Each product was prepared, and the expected moisture content range was divided into six or seven levels from 3 to 21% wb with 3% wb intervals. The NIR reflectance spectra acquired in the wavelength range from 1,100 to 2,300 nm were used for the development of prediction models of the moisture content in red pepper powder. Results: The values of $R{_V}{^2}$, SEP, and RPD for the best PLSR model to predict the moisture content in red pepper powders of varying particle sizes below 1.4 mm were 0.990, ${\pm}0.487%$ wb, and 10.00, respectively. Conclusions: These results demonstrated that NIR spectroscopy and a PLSR model could be useful techniques for measuring rapidly and non-destructively the moisture content in red pepper powder.

• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.300-312
• /
• 1993

The material deterioration of service-exposed boiler tube steels in fossil power plant was evaluated by using the electrochemical technique namely, modified electrochemical potentiokinetic reactivation(EPR). It was focused that the passivation of Mo$_{6}$C carbide which governs the mechanical properties of Mo alloyed steels did not occur even in the passivity region of steel in sodium molybdate solution and the reactivation peak current (Ip) observed as the result of non-passivation indicating the precipitation of Mo$_{6}$C carbides. To obtain the optimal test conditions for the field test by using the specially designed electrochemical cell, the effects of scan rate, the surface roughness and the pH of electrolyte on Ip value were also investigated. Furthermore, the change of mechanical properties occurred during the long time exposure at high temperature was evlauated quantitatively by small punch(SP) tests and micro hardness test taking account of the metallurgical changes. It is known that reactivation peak current (Ip) has a good relationship with Larson-Miller Parameter(LMP) which represents the information about material deterioration occurred at high temperature environment. In addition it was possible to estimate the ductile-brittle transition temperature (DBTT) by means of the SP test. The Sp test could be, therefore, suggested as a reliable test method for evaluating the material degradation of boiler tube steels. From the good correaltion between the SP DBTT and Ip values shown in this study, it was knows that the change of mechanical properties could be evaluated non-destructively by measurring only Ip values.ues.

• Applied Biological Chemistry
• /
• 제37권5호
• /
• pp.349-355
• /
• 1994

비파괴 측정법의 하나인 근적외 분광분석법을 응용하여 국내산 황색종 잎담배의 품질에 관련된 주요성분인 수분, 니코틴, 전질소, 환원당 및 색깔 등을 신속, 정확하게 동시에 측정하기 위한 가능성을 조사하였다. 근적외 영역의 광학데이타와 기존 습식분석법에 의한 잎담배의 수분, 니코틴, 전질소, 환원당 및 L, a, b 측정치 간에 중회귀 분석을 행한 결과, 검정용 시료에 대한 측정오차(SEP)가 각각 0.28%, 0.25%, 0.07%, 1.25, 0.44 및 1.07이며, 시료의 전처리없이 30초 이내에 동시에 측정 가능함을 알 수 있었다. 아울러 잎담배 수매, 원료가공 및 제품담배 제조현장에 활용하기 위한 보급형 근적외 분광분석기의 개발 가능성도 검토하였다.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.514-522
• /
• 2022

Non-destructive testing (NDT) technology is a widely used inspection method for agricultural products. Compared with the conventional inspection method, there is no extensive sample preparation for NDT technology, and the sample is not damaged. In particular, NDT technology is used to inspect the internal structure of agricultural products infested by pests. The introduction and spread of pests during the import and export process can cause significant damage to the agricultural environment. Until now, pest detection in agricultural products and quarantine processes have been challenging because they used external inspection methods. However, NDT technology is advantageous in these inspection situations. In this pilot study, we investigated the feasibility of X-ray computed tomography (X-ray CT) and magnetic resonance imaging (MRI) to identify pest infestation in agricultural products. Three kinds of artificially pest-infested fruits (mango, tangerine, and chestnut) were non-destructively inspected using X-ray CT and MRI. X-ray CT was able to identify all pest infestations in fruits, while MRI could not detect the pest-infested chestnut. In addition, X-ray CT was superior to the quarantine process than MRI based on the contrast-to-noise ratio (CNR), image acquisition time, and cost. Therefore, X-ray CT is more appropriate for the pest quarantine process of fruits than MRI.

• Fisheries and Aquatic Sciences
• /
• 제25권5호
• /
• pp.264-275
• /
• 2022

A non-destructive environmental DNA protocol for the genetic analysis of sea cucumber (Apostichopus japonicus) resources DNA was established. Among the several commercial DNA extraction kits, the DNeasy^® Plant Mini Kit was selected as the best choice to obtain the high-quality genomic DNAs from the mucous sea cucumber. As the temperature and incubation time increased, the amount of extracted environmental DNA was also large, but it was judged that the increased amount did not affect as much as 2-3 times. Therefore, these conditions were not considered to be the main factors to consider in actual environmental DNA extraction. However, the amount of seawater relative to the size of the sample was judged as a major consideration, and a sufficient amount of environmental DNA for analysis was secured when stored within 1 min while stirring the volume of seawater corresponding to the total sea cucumber weight (g). In securing the environmental DNA of sea cucumbers, the mortality rate of sea cucumbers in all experiments was 0, and it was judged that the effects of sea cucumbers were not significant through this treatment. Through the results of this study, sea cucumber DNA research, which has been conducted in a destructive method, can be conducted non-destructively through environmental DNA analysis. Through this study, we have secured a standard protocol that can successfully extract the sea cucumber DNA through environmental DNA. It is not only excellent in terms of time and cost of traditional DNA analysis method currently used, but it is completely non-destructive in the ecosystem of the survey area. It is believed that the system can be transformed in a way that does not affect it. However, it is thought that various standard protocols should be established considering the characteristics of each type.

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.826-837
• /
• 2004

Rotational molding is a plastics processing technique that is ideally suited to producing relatively large, hollow, seamless parts which are partially or totally enclosed. Designers of plastic parts turn to rotational molding to produce small or large parts of unusual shape that cannot be produced as one piece by other processes, e.g., blow molding and thermoforming. In this paper, in order to enhance the quality of rotational molding plastic products, 1) surface features for the plastic products are characterized by using an image analysis system, 2) maximum tensile strength for the plastic products that are made of materials that consist of Samsung-Atofina R90lU, pigments and two different kinds of calcium carbonate (OMYA CaCO$_3$) is measured and compared with each other by using an Instron universal testing machine, 3) thickness for the plastic products is non-destructively measured to investigate the quality of the plastic products by using an A-scan ultrasonic tester.

• 대한기계학회논문집A
• /
• 제22권2호
• /
• pp.311-320
• /
• 1998

The cryogenic fracture behaviors of austenitic stainless steel HN2 developed for nuclear fusion reactor were evaluated quantitatively by using the small punch(SP) test. The electrochemical polarization test was applied to study thermal aging degradation of HN2 steel. The X-ray diffraction(XRD) analysis was conducted to detect carbides and nitrides precipitated on the grain boundary of the heat treated HN2 steel. The mechanical properties of the HN2 steel significantly decreased with increasing time and temperature of heat treatment or with decreasing testing temperature. The integrated charge(Q) obtained from electrochemical polarization test showed a good correlation with the SP energy(ESP) obtained by means of SP tests. From the results observed in the x-ray diffraction and anodic polarization curve, it was known that the material the grain boundary. Combining SP test and electrochemical polarization test, it could be useful tools to non-destructively evaluate the cryogenic fracture behaviors and the aging degradation for cryogenic structural material.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.521-524
• /
• 2000

Nearinfra-red(NIR) reflectance NIR a spectra (400 to 2,100 nm) were collected on 32 beef samples to find feasibility of predicting beef tenderness. The study to predict beef tenderness was accomplished with the stepwise second differential data of the collected NIR spectra. Beef tenderness was measured by Warner-Bratzler(WB) shear force using a Universal Testing Machine(UTM). After modeling the relation between Warner-Bratzler shear force and NIR spectrum of 19 samples among the 32 beef samples, the verification was carried out through predicting the other 13 samples. The SEC and R$^2$ values in the prediction equation were 9.07(N) and 0.6463, respectively. The SEP and R$^2$ were 14.8(N) and 0.7082 (wave length 552 nm, 1988 nm) respectively. The result implied that it was possible to predict the beef tenderness using NIR spectrum and that the tenderness could be predicted non-destructively in real time.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.43-48
• /
• 2009

The purpose of this study is to show how to eliminate the noises and to obtain the data related with the relationship between AE signal characteristics and mechanical behaviors for the pressure vessel steel. Various kinds of noises are introduced into the AE data in the course of experiments. Accordingly, real AE data have to be obtained after tests. AE test was carried out under four point bending load. Among AE signals, counts and signal strength are used to find out the differences of AE characteristics between the basemetal and weldment. After tests, this paper shows the procedures of filtering the noises against basemetal of the pressure vessel steel to obtain the real data around crack tip. Relationships between plastic zone size and cumulative AE counts are shown also. AE signals were absent within an elastic region, regardless of the specimens. Most of AE signals are produced in the process of plastic deformation. The deformation and fracture modes of basemetal and weldment are quiet different.