• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.113-122
• /
• 2007

In this study, uranium migration experiments have been performed using a natural groundwater and a granite core with natural fractures in a glove-box constructed to simulate an appropriate subsurface environment. Groundwater flow experiments using the non-sorbing anionic tracer Br were carried out to analyze the flow properties of groundwater through the fracture of the granite core. The result of the uranium migration experiment showed a breakthrough curve similar to that of the non-sorting Br. This result may imply that uranium migrates as anionic complexes through the rock fracture since uranium can form carbonate complexes at a given groundwater condition. The distribution coefficient $K_d$ of the uranium between the groundwater and the fracture filling material was obtained as low as 2.7 mL/g from a batch sorption experiment. This result agrees well with the result from the migration experiment, showing a faster elution of the uranium through the rock fracture. In order to analyze retardation properties of the uranium through the rock fracture, the retardation factor $R_d({\sim}16.2)$ was obtained by using the $K_d$ obtained from the batch sorption experiment and it was compared with the $R_d({\sim}14.3)$ obtained by using the result from the uranium migration experiment. The values obtained from the both experiments were very similar to each other. This reveals that the retardation of the uranium is mainly occurred by the fracture filling material when the uranium migrates through the fracture of a granite core.

• Korean Chemical Engineering Research
• /
• v.53 no.5
• /
• pp.590-596
• /
• 2015

Estimating potential of $CO_2$ emission reduction of non-capture $CO_2$ utilization (NCCU) technology was evaluated. NCCU is sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue gas. For the estimating the $CO_2$ emission reduction, process simulation using process simulator (PRO/II) based on a chemical plant which could handle $CO_2$ of 100 tons per day was performed, Also for the estimation of the indirect $CO_2$ reduction, the solvay process which is a conventional technology for the production of sodium carbonate/sodium bicarbonate, was studied. The results of the analysis showed that in case of the solvay process, overall $CO_2$ emission was estimated as 48,862 ton per year based on the energy consumption for the production of $NaHCO_3$ ($7.4GJ/tNaHCO_3$). While for the NCCU technology, the direct $CO_2$ reduction through the $CO_2$ carbonation was estimated as 36,500 ton per year and the indirect $CO_2$ reduction through the lower energy consumption was 46,885 ton per year which lead to 83,385 ton per year in total. From these results, it could be concluded that sodium bicarbonate production technology through the carbonation reaction of $CO_2$ contained in the flue was energy efficient and could be one of the promising technology for the low $CO_2$ emission technology.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.6
• /
• pp.257-262
• /
• 2015

Recently the world wide efforts reduce occurrence of $CO_2$; global warming main reason. The aim of this study is to improve recycling rate of the fly ash (FA) and fused waste slag (FWS) from the power plant and to carbonate under supercritical condition ($40^{\circ}C$, $80kgf/cm^2$ pressure, 60 min) for $CO_2$ fixation. Specimens of mortar with various mixing ratios of FA, FWS (from 100:0 to 20:80 in 5 steps of 20 % reduction each time), distilled water and 3 M NaOH alkali activators were prepared. As a result, the proportion of weight change ratio increases with CaO content, to 12 % after carbonation under the supercritical condition. There is difference of compressive strength between the carbonated and the alkali activator mortar specimens. The stabilization of $CO_2$ fixation through carbonation which could confirm the applicability of the eco-friendly materials without loss of compressive strength.

• Conservation Science in Museum
• /
• v.13
• /
• pp.13-22
• /
• 2012

The patterns for Jeogui and Pyeseul (patterns of the queen's ceremonial robe worn and a belt ornament covering knees in the front) as owned by National Museum of Korea were made in the early 20th century and both of them were colored on paper. Through a non-destructive analysis on pigments and dyes used on both the patterns, it was attempted to identify the coloring materials. As for the analysis of the coloring pigments, the XRF was used. As a result of the pigment analysis on the pattern for Jeogui, it is presumed that lead white was used for obtaining the white color, ink stick for black color, orpiment for yellow color, cinnabar and red lead for red color, copper and arsenical or a mixture of copper carbonate and orpiment for green color whereas brass seems to have been used for obtaining other colors. The pigments used for obtaining the colors of white, black, yellow and green on the pattern for Pyeseul are the same as those used on the pattern for Jeogui whereas the red pigments used on each of the two patterns are seen to be different. Although it may be difficult to identify the kinds of blue pigments that were used on the patterns for Jeogui and Pyeseul, a mixture containing lead white is presumed to be used as blue pigment. Also, as a result of the UV-Vis spectroscopic analysis performed on the blue hanji (traditional Korean paper) of the pattern for Jeogui, it was presumed to have been dyed with indigo.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.6
• /
• pp.626-634
• /
• 2005

The objectives of this study was to assess pollution level and contamination status on tailings and soil in the vicinity of four disused metal mines in Kangwon province. As the result of total metal concentrations analysis, the pollution degree of tailings and soil decreased in the order of Wondong > Second Yeonhwa > Sinyemi ${\fallingdotseq}$ Sangdong mines. Total metal concentrations of mine tailings in this study were $1.2{\sim}78.2$ and $1.1{\sim}80.6$ times higher than those in the background soil and the tolerable levels suggested by Kloke, respectively. From these results, we found that tailings served as contamination source of nearby soil. According to sequential extraction of metals, large proportion of heavy metals in all mine tailings existed in the form of a residual fraction, and heavy metals in non-residual form was mainly associated with Fe-Mn oxide fraction and sulfidic-organic fraction. Fe-Mn oxide fraction and sulfidic-organic fraction of heavy metals may be released into and contaminated the nearby environment under the oxidation or reduction condition in long-term. In particular, the proportions of the exchangeable and carbonate fraction of Cd in mine tailings from Second Yeonhwa mine were relatively high. This suggests that Cd may be easily released into and contaminated the nearby environment in the near time. Concentrations of heavy metals in mine tailings and the nearby soil exceeded the standard (agricultural area) of Soil Environment Conservation Law. So it was thought that remediation for mine tailings and the nearby soil is needed. The pollution indices of the samples in this study were for higher than 1.0 and the pollution degree was very serious. Priority remediation site for these mines was Wondong. As Results of danger indices, it was showed that exchangeable form in Wondong and Fe-Mn oxide form in the rest mines should be removed preferentially.

• Membrane Journal
• /
• v.18 no.4
• /
• pp.282-293
• /
• 2008

Partially sulfonated poly(aryl ether sulfone) membranes were prepared from the sulfonated sulfone monomer, which was synthesized by a nucleophilic substitution, non-sulfonated monomers and potassium carbonate by a direct polymerization method and a subsequent solution casting technique with mixed solvents of N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). To investigate the effect of mixed solvent, the volume ratios of NMP and DMAc were varied in the range of $0{\sim}100%$ and the degrees of sulfonation of the copolymers were fixed as 50%. The surface properties of the resulting membranes were examined by scanning electron microscope (SEM) and atomic force microscope (AFM), and a comparative study of the morphology changes and the physicochemical properties such as proton conductivity and methanol permeability was achieved. It was found that proton conductivities depend on the volume ratio of NMP-DMAc mixed solvents, and the proton conductivity determined at the condition of $25^{\circ}C$ and 100% relative humidity was $1.38{\times}10^{-1}\;S/cm$ for the membrane prepared in the 50:50 v/v-% of NMP : DMAc mixed solvent.

• Journal of the Korean earth science society
• /
• v.28 no.1
• /
• pp.54-63
• /
• 2007

The sedimentary sequence of the non-marine Cretaceous Jinju Formation from Sacheon, Korea, contains a number of rod-shaped stromatolites (RSS) characterized by concentric lamination with curd-shaped, stratiform, and small columnar stromatolites. Unlike the world trend, a massive distribution of rod-shaped stomatolite was discovered in the region. The mineral composition, diagenetic alteration, and weathering process of the kind were analyzed by EPMA. The gross morphology of RSS is almost identical to broken plant twigs or stems formed by microbial activity onto which it grew. RSSs are interpreted as stromatolitic algae over plant twigs, which formed through concentric carbonate precipitation by epiphytic algal photosynthesis. The distribution of localities and horizons of the stromatolite imply that RSS is allochthonous and autochthonous. Two types of cyanobacterial filaments and one type of peen algal filament were discovered. The size frequency distribution of calcified filamentous microfossils found in stromatolite was $2.2{\mu}m\;and\;7.8{\mu}m$ in mean diameter of the former, $32.3{\mu}m$ in mean diameter of the latter. The cyanobacterial fossils played a key role in the formation of stromatolite, while the green algal filament was auxiliary stromatolite-builder stromatolites. The filamentous microfossils including trichome were found within the stromatolitic laminae.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.357-364
• /
• 2005

We surveyed the incidence of urinary calculi for feeding period, urinary lesion, composition of calculi and changes of serum chemistry with Korean native castrated steers, which are growing until 26 through 31 months. Without showing any clinical signs such as urethral obstruction, hydronephrosis and strangury for all group, $37.8\%$ (34 out of 90) of Korean native steers carried urinary calculi in carcass. The incidence of urine calculi far different feeding stages from 26 to 31 months were observed as $13.3-60.0\%$er, no significant differences were detected. The distribution of calculi were kidney $(24.4\%)$, kidney and bladder $(10\%)$ and kidney, bladder and urine $(3.3\%)$. Congestion of urinary bladder was shown in $26.6\%$ of Korean native steers. Korean native steers with urinary calculi $(41.2\%)$ had more possibilities (P<0.05) to bring outbreaks of congestion of urinary bladder than those of without calculi $(17.8\%)$. The main composition of calculi were struvite (magnesium ammonium phosphate crystals), calcium phosphate, calcium carbonate, calcium oxalate, non-oxalate calcium, ammonia and phosphate. The distribution of urine pH was $71.7\%$(above pH 8.0), $12.2\%$ (between pH 7.0 and pH 8.0) and $16.6\%$ (under pH 7.0). Like shown in herbivores, most of the urine pH was distributed as alkaline urine. Serum creatinine was shown significant difference (P<0.05) according to incidence of calculi but other serum chemistry didn't show any difference in serum chemistry. These results suggest that feeding until 26 to 31 months in Korean native steers castrated at 6 months of the age elicits urinary calculi and congestion of urinary bladder, but not clinical abnormality. And adjustment of the dietary Can ratio to a level of 2:1 or greater during feeding period may reduce the possibility of incidence of urinary calculi in Korean native steers.

• Journal of Biosystems Engineering
• /
• v.39 no.3
• /
• pp.227-234
• /
• 2014

Purpose: The aim of this research was to develop and evaluate natural hydroxyapatite (HA) ceramics produced from the heat treatment of pig bones. Methods: The properties of natural HA ceramics produced from pig bones were assessed in two parts. Firstly, the raw materials were characterized. A temperature of $1,200^{\circ}C$ was chosen as the calcination temperature. Fine bone powders (BPs) were produced via calcinations and a milling process. Sintered BPs were then characterized using field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), energy dispersive X-ray spectroscopy (EDX), Fourier transform infrared (FTIR) spectroscopy, and a 2-year in vitro degradability test. Secondly, an indirect cytotoxicity test was conducted on human osteoblast-like cells, MG63, treated with the BPs. Results: The average particle size of the BPs was $20{\pm}5{\mu}m$. FE-SEM showed a non-uniform distribution of the particle size. The phase obtained from XRD analysis confirmed the structure of HA. Elemental analysis using XRF detected phosphorus (P) and calcium (Ca) with the Ca/P ratio of 1.6. Functional groups examined by FTIR detected phosphate ($PO{_4}^{3-}$), hydroxyl ($OH^-$), and carbonate ($CO{_3}^{2-}$). The EDX, XRF, and FTIR analysis of BPs indicated the absence of organic compounds, which were completely removed after annealing at $1,200^{\circ}C$. The BPs were mostly stable in a simulated body fluid (SBF) solution for 2 years. An indirect cytotoxicity test on natural HA ceramics showed no threat to the cells. Conclusions: In conclusion, the sintering temperature of $1,200^{\circ}C$ affected the microstructure, phase, and biological characteristics of natural HA ceramics consisting of calcium phosphate. The Ca-P-based natural ceramics are bioactive materials with good biocompatibility; our results indicate that the prepared HA ceramics have great potential for agricultural and biological applications.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.221-227
• /
• 2010

In this study, we consider gas generation characteristics on pyrolysis of eco-fuel which were made by mixing of Pitch Pine and Lauan sawdust as biomass and polyethylene, polypropylene, polystyrene as municipal plastic wastes with catalyst in fixed bed reactor. From the result of higher heating value(HHV) measurement and of ultimate analysis, the heating value of plastic wastes and a hydrogen content in plastic sample are higher than biomass. An activation energy was reduced by a catalyst addition. However the catalyst content influence over 5 wt% was insignificant. The yield of hydrogen from gasification of biomass containing plastic wastes such as polyethylene, polypropylene and polystyrene were obtained higher than that of sole biomass. The high temperature and mixture ratio of catalyst conditions induced to high hydrogen yield in most of the samples. As the influence of catalyst, the hydrogen yield by catalytic reaction was higher than non-catalytic reaction. We confirmed that Ni-$ZrO_2$ catalyst is more active in increasing the hydrogen yield in comparison with that of carbonate catalyst. The maximum hydrogen yield was 65.9 vol.%(Pitch Pine / polypropylene / 20 wt.% Ni-$ZrO_2$(1:9) at $900^{\circ}C$).