• 분석과학
• /
• 제28권5호
• /
• pp.341-346
• /
• 2015

In order to understand the counter anionic effects in a non-aqueous vanadium redox flow battery (VRFB), we synthesized four types of electrolyte salts (1-ethyltriethamine tertafluoroborate, [E-TEDA]⁺[BF₄]⁻, 1-ethyltriethamine hexafluorophosphate, [E-TEDA]⁺[PF₆]⁻, 1-butyltriethylamine tertafluoroborate, [B-TEDA]⁺[BF₄]⁻, and 1-buthyltriethamine hexafluorophosphate [B-TEDA]⁺[PF₆]⁻) by counter anion exchange reaction after the SN₂ reaction. We confirmed the successful synthesis of the electrolyte salts [E-TEDA]⁺[Br]⁻ and [B-TEDA]⁺[Br]⁻ via ¹H-NMR spectroscopy and GC-mass analysis before the counter anion exchange reaction. The electric potential of the vanadium acetylacetonate, V(acac)₃, as an energy storage chemical was shown to be 2.2 V in the acetonitrile solvent with each of the [E-TEDA]⁺[BF₄]⁻, [E-TEDA]⁺[PF₆]⁻, [B-TEDA]⁺[BF₄]⁻, and [B-TEDA]⁺[PF₆]⁻ electrolyte salts. In a non-aqueous VRFB with a commercial Neosepta AFN membrane, the maximum voltages reached 1.0 V and 1.5 V under a fixed current value of 0.1 mA in acetonitrile with the [E-TEDA]⁺[BF₄]⁻ and [E-TEDA]⁺[PF₆]⁻ electrolyte salts, respectively. The maximum voltage was 0.8 V and 1.1 V under a fixed current value of 0.1 mA in acetonitrile with the [B-TEDA]⁺[BF₄]⁻ and [B-TEDA]⁺[PF₆]⁻ electrolyte salts, respectively. From these results, we concluded that in the non-aqueous VRFB more of the [PF₆]⁻ counter anion than the [BF₄]⁻ counter anion was transported onto the commercial Neosepta AFN anion exchange membrane.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.349-352
• /
• 2004

Organic-inorganic hybrid sol based on ZrO$_2$-SiO$_2$ system was prepared by sol-gel process. Firstly, ZrO$_2$ non-aqueous precursor sol was synthesized and then organosilane compounds which include epoxy silane (GPTS; 3-g1ycidoxypropyl tri-methoxysilane) and acryl silane (ACS; (3-(tri-methoxysilyl)propylmethacrylate)) were added to ZrO$_2$precursor sol for hybridization. Finally, com-mercial silica sol was added to improve the mechanical properties. Synthesized organic-inorganic Zr-hybrid sol was coated on polycarbonate substrate for enhancing it’s mechanical properties, especially hardness. Vicker’s hardness of polycarbonate sub strate was increased from 13.6 to 17.8 MPa and its pencil hardness was increased from 2 to 7 H, respectively, after coating and drying at 10$0^{\circ}C$ for 30 min.

• 한국표면공학회지
• /
• 제41권5호
• /
• pp.240-244
• /
• 2008

Composite plating is a method of co-deposition of plating layer with metallic and/or non-metallic particles to improve the plating layer properties such as high corrosion resistance and photolysis of organic compounds. The properties of nickel-ceramic composite plating are significantly depend on the surface characteristics of co-deposited particles as well as the quantity in electrolyte. In this study, Ni-$TiO_2$ composite coating layer was produced by electrodeposition technique from non-aqueous eletrolyte and its surface characteristics as well as photolytic properties were investigated. The amounts of immobilized $TiO_2$ particles increased with increasing the initial $TiO_2$ particles contents in the bath. Samples electroplated with the current density of $0.5\;A/dm^2$ showed the significantly improved homogeneous $TiO_2$ particles distribution. The corrosion resistance of Ni-$TiO_2$ composite coating layer also improved with increaing the amounts of $TiO_2$ particles. Etched sample showed about 10% increased photolytic rate of organic matter compare to that of the non-etched.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.16-22
• /
• 2012

Experimental investigations were carried out to examine the heat and mass transfer characteristics of LiCl aqueous solution for a plate heat exchanger type dehumidifier. Cooling dehumidification was adopted vertical type heat exchanger. Also non woven fabric is attached surface of the heat exchanger for spreadability of LiCl aqueous solution. Mass flow-rate of LiCl aqueous solution and concentration were selected as experimental conditions. Also, In this study, the effects of relative humidity of process air and velocity were investigated experimentally. As a result of heat transfer coefficient and mass transfer coefficient of were increased film reynolds number increased. heat transfer coefficient and mass transfer coefficient of LiCl aqueous solution were 0.14~0.24 kW/$m2^{\circ}C$ and $1.3{\times}10-63{\sim}6.2{\times}10-6$ m/s respectively.

• Bulletin of the Korean Chemical Society
• /
• 제23권11호
• /
• pp.1683-1684
• /
• 2002

• Bulletin of the Korean Chemical Society
• /
• 제18권9호
• /
• pp.914-915
• /
• 1997

• 공업화학
• /
• 제18권4호
• /
• pp.320-325
• /
• 2007

본 연구에서는 재래식 및 마이크로파 합성법을 통하여 비수계 유기용매인 diethanolamine을 용매로 하여 초산니켈 수용액과 히드라진 수화물로부터 니켈 분말을 합성하였다. X선 회절분석, 주사 전자현미경 분석, 열분석 및 X선 광전자 분광기 분석등을 통하여 마이크로파의 비열적 효과 및 반응 조건이 니켈분말의 합성에 미치는 영향을 조사하였다. 재래식 합성과 비교해보면, 마이크로파를 이용한 합성에서 마이크로파의 비열적 효과에 기인하여 상대적으로 응집이 적게 일어나고, 입자 크기는 작고, 입도 분포는 균일하였다.

• BMB Reports
• /
• 제47권5호
• /
• pp.292-297
• /
• 2014

Age-related macular degeneration (AMD) is the leading cause of blindness in the world. Evidence indicates that the suppression of the ubiquitin-proteasome system (UPS) contributes to the accumulation of toxic proteins and inflammation in retinal pigment epithelium (RPE), the functional abnormalities and/or the degeneration of which are believed to be the initiators and major pathologies of AMD. To identify new protein associations with the altered UPS in AMD, we used LC-ESI-MS/MS to perform a proteomic analysis of the aqueous humor (AH) of AMD patients and matched control subjects. Six UPS-related proteins were present in the AH of the patients and control subjects. Four of the proteins, including 26S proteasome non-ATPase regulatory subunit 1 (Rpn2), were increased in patients, according to semi-quantitative proteomic profiling. An LC-MRM assay revealed a significant increase of Rpn2 in 15 AMD patients compared to the control subjects, suggesting that this protein could be a biomarker for AMD.

• 대한화장품학회지
• /
• 제24권3호
• /
• pp.96-104
• /
• 1998

It was possible to produce W/O/W one step multiple emulsion on the system which satisfied following conditions. 1. 1-5％ of hydrophilic liquid surfactant over HLB20 and lipophilic liquid surfactant which has HLB 3∼5 2. Non wax copolymers as oil thickener 3. More than 0.5％ of carbomer as aqueous thickener 4. The manufacturing process which neutralize the dispersed carbomer (2.0％ in water), after emulsifying. For the selective addition into inner and outer aqueous phase, we melted the glucose in water before emulsifying. Using an Anthrone analysis method, we analyzed the encapsulation yield of glucose in inner water phase. It was possible to raise the water encapsulation yield of the multiple emulsion through the following conditions. 1. Using of anionic hydrophilic surfactant(HLB 40) and lipophilic surfactant (HLB 3∼5) 2. Controlling the ratio of hydrophilic surfactant and lipophilic surfactant 3. Strengthening interface with increase of non wax oil thickener. When the separated adding process of glucose was adopted, approximately 85％ of glucose was added selectively within inner aqueous phase.

• 한국세라믹학회지
• /
• 제46권3호
• /
• pp.282-287
• /
• 2009

Rod-shaped particle reinforced $LiAlO_2$ matrices for MCFC were fabricated by an aqueous tape-casting technique. The hydrolysis reaction and agglomeration of $\gamma-LiAlO_2$ particles in aqueous slurries were inhibited by additions of $LiOH{\cdot}H_2O$ and glycerin to the aqueous $\gamma-LiAlO_2$ slurry. The tape-casting, performed using the aqueous slurry containing protein albumin, was fast and led to an effective drying at casting temperature range of $60{\sim}65^{\circ}C$. The strength of the particle reinforced matrix was improved about 4 times compared to that of matrix without reinforcement. Pore size distribution ($0.1{\sim}0.4{\mu}m$) and porosity ($50{\sim}60%$) of the reinforced matrices were determined to be appropriate for the MCFC matrix. The aqueous tape casting process is not only environmental-friendly but also efficient for fabricating MCFC matrices compared to non-aqueous tape casting.