국우리는 흔히 21세기가 세계화와 지방화가 동시에 진행되는 글로컬라이제이션(Glocalization)의 시대라고 말하고 있다. 더구나 스마트폰(Smart Phone)의 빠른 보급과 SNS(Social Network Service)의 광범위한 사용으로 인하여 이 시대에는 글로벌 정보 및 지역 정보의 다양한 활용능력이 기업 경쟁력에 미치는 영향력이 지속해서 증대되었으며, 상거래의 형태도 과거의 고전적 방법의 제조나 유통에서 벗어나 전자 상거래를 통한 직접 혹은 간접적인 거래가 급속하게 파급되어져 가고 있는 실정이다. 이러한 새로운 트렌드(Trend)에 적응하는 교육지향성이 정보의 활용 능력을 극대화하여 기술혁신을 주도하는 중요한 요소로 부상하게 되었고, 궁극적으로는 기업의 성과에 영향을 미친다고 하겠다. 본 논문에서는 대 중국 한국투자기업의 교육지향성이 기업의 기술혁신 및 기업성과에 중장기적으로 미치는 영향력을 파악하여, 궁극적으로는 중국에 특화된 기술을 개발하는 기업경영 전략의 기초 자료를 도출하고자 한다. 따라서 본 연구는 연구대상으로서 중국투자기업만을 다루며, 연구문제로서 기술혁신성에 미치는 영향요인 검증과 기술혁신이 기업성과에 미치는 영향을 다루었다. 제 I 장은 서론이며 제 II장에서는 이 논문의 연구대상인 중국투자기업의 특성과 현황을 살펴본 후에, 이 논문의 실증 연구모형의 주요 변인인 학습지향성, 기술혁신, 기업성과의 개념과 의의를 살펴보고 각각에 대한 선행연구들을 정리하였다. 제 III장에서는 이 논문에서 채택한 연구모형과 설문조사에서의 조사 대상 및 방법, 조사 가설, 각 변인의 조작적 정의, 설문지 구성, 분석 방법 등을 설명하였다. 제 IV장에서는 설문조사 결과를 토대로 앞장에서의 연구가설을 검증하였고, 제 V장에서 나타난 이 논문의 연구결과는 기술혁신성에 대한 인식도가 상대적으로 높게 나타났으며 학습지향성과 기술혁신성은 모두 성과와 유의한 상관관계를 갖는 것으로 나타났고, 학습지향성은 기술혁신성에 유의한 정(+)의 영향을 미치는 것으로 나타났으며, 학습지향성과 기술혁신성은 각각 성과에 유의한 정(+)의 영향을 미치는 것으로 연구되었다.
본 실험은 초자화 동결된 생쥐 배반포기배의 융해 후 배양조건 및 이식방법이 난자의 생존에 미치는 효과를 조사하고자 실시하였다. 체외수정후, M16배양액에서 4일동안 배양하여 얻어진 생쥐 배반포기배는 EFS40 (40% ethylene glycol, 18% Ficoll, 0.5 M sucrose가 함유된 PBS)으로 초자화동결하였다. 실험 I에서는 융해 후 배양조건에 따른 난자들의 체외/체내 생존율을 조사하였다. 융해된 난자가 M16과 4 mg/ml 소혈청알부민과 20 가지 아미노산이 함유된 m-CR1 (2% BME 아미노산 용액, 1% MEM 아미노산 용액) 및 단층배양이 유도된 난구세포 (10% FBS가 함유된 m-CR1배양액)에서 각각 배양되었을 때, 융해 후 24시간째 체외 생존율은 배양조건에 따라 차이가 없었다(75.6, 83.1, 82.4%). 그러나 체내 발달율에 있어서 임신 15일째 생존 산자율은 39.0, 49.0, 38.1%로서 유사한 성적을 나타냈으나, 전체 착상율에 있어서는 m-CR1 (80.4%)에 배양되었을 때, M16 (51.2%), 난구세포와 공배양시 (57.1%)보다 유의하게 높은 생존율을 보였다(p<0.05). 실험 II에서는 수정란 이식 방법에 따른 체내 발달율을 조사하였다. 배반포기배를 융해 후 체외배양없이 곧바로 가임신 2, 3일째 대리모에 이식을 실시하였을 때, 가임신 2일째 대리모에서는 임신징후를 얻지 못하였고, 가임신 3일째 대리모에서는 50.0%의 착상율과 15.4%의 정상산자율을 얻었다. 그러나, 이러한 결과는 융해 후, 16시간 배양하여 가임신 3일째 대리모에 이식 (73.5, 57.1%)하는 경우보다 유의하게 낮은 결과였다(p<0.05). 실험 III에서는 초자화 동결된 배반포기배의 융해 후 배양시 발달이 늦어진 수정란의 이용효율을 극대화시키기 위해 융해한 4일째 초기, 5일째 초기, 5일째 팽창 배반포기배의 체외/체내 생존율을 조사하였다. 가장 높은 체외 생존율은 5일째 팽창 배반포기배 (78.3%)에서 얻었으나, 체내 발달율 (산자율, 착상율)에 있어서는 4일째 초기 배반포기배 (33.3, 66.7%)의 경우가, 5일째 팽창 배반포기배(29.0, 38.7%)의 경우보다 높았다(p<0.05). 따라서 본 연구의 결과는 배양조건과 수정란 이식방법에 따라 초자화 동결된 배아의 체외/체내 발달율을 높일 수 있으며, 발달이 늦은 배반포기배의 체내 발달율은 체외 배양시간이 길어질수록 낮아짐으로, 5일째 팽창 배반포기배보다 4일째 초기 배반포기배를 동결하는 것이 더 유용하다는 것을 알 수 있었다.
Arcella, V.;Colaianna, P.;Brinati, G.;Gordano, A.;Clarizia, G.;Tocci, E.;Drioli, E.
한국막학회:학술대회논문집
/
한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
/
pp.39-42
/
1999
Perfluoropolymers represent the ultimate resistance to hostile chemical environments and high service temperature, attributed to the presence of fluorine in the polymer backbone, i.e. to the high bond energy of C-F and C-C bonds of fluorocarbons. Copolymers of Tetrafluoroethylene (TEE) and 2, 2, 4Trifluoro-5Trifluorometoxy- 1, 3Dioxole (TTD), commercially known as HYFLON AD, are amorphous perfluoropolymers with glass transition temperature (Tg)higher than room temperature, showing a thermal decomposition temperature exceeding 40$0^{\circ}C$. These polymer systems are highly soluble in fluorinated solvents, with low solution viscosities. This property allows the preparation of self-supported and composite membranes with desired membrane thickness. Symmetric and asymmetric perfluoropolymer membranes, made with HYFLON AD, have been prepared and evaluated. Porous and not porous symmetric membranes have been obtained by solvent evaporation with various processing conditions. Asymmetric membranes have been prepared by th wet phase inversion method. Measure of contact angle to distilled water have been carried out. Figure 1 compares experimental results with those of other commercial membranes. Contact angles of about 120$^{\circ}$for our amorphous perfluoropolymer membranes demonstrate that they posses a high hydrophobic character. Measure of contact angles to hexandecane have been also carried out to evaluate the organophobic character. Rsults are reported in Figure 2. The observed strong organophobicity leads to excellent fouling resistance and inertness. Porous membranes with pore size between 30 and 80 nanometers have shown no permeation to water at pressures as high as 10 bars. However high permeation to gases, such as O2, N2 and CO2, and no selectivities were observed. Considering the porous structure of the membrane, this behavior was expected. In consideration of the above properties, possible useful uses in th field of gas- liquid separations are envisaged for these membranes. A particularly promising application is in the field of membrane contactors, equipments in which membranes are used to improve mass transfer coefficients in respect to traditional extraction and absorption processes. Gas permeation properties have been evaluated for asymmetric membranes and composite symmetric ones. Experimental permselectivity values, obtained at different pressure differences, to various single gases are reported in Tab. 1, 2 and 3. Experimental data have been compared with literature data obtained with membranes made with different amorphous perfluoropolymer systems, such as copolymers of Perfluoro2, 2dimethyl dioxole (PDD) and Tetrafluorethylene, commercialized by the Du Pont Company with the trade name of Teflon AF. An interesting linear relationship between permeability and the glass transition temperature of the polymer constituting the membrane has been observed. Results are descussed in terms of polymer chain structure, which affects the presence of voids at molecular scale and their size distribution. Molecular Dyanmics studies are in progress in order to support the understanding of these results. A modified Theodoru- Suter method provided by the Amorphous Cell module of InsightII/Discover was used to determine the chain packing. A completely amorphous polymer box of about 3.5 nm was considered. Last but not least the use of amorphous perfluoropolymer membranes appears to be ideal when separation processes have to be performed in hostile environments, i.e. high temperatures and aggressive non-aqueous media, such as chemicals and solvents. In these cases Hyflon AD membranes can exploit the outstanding resistance of perfluoropolymers.
한국의 개고기 식용은 오랜 역사와 전통을 가지고 있으나 정부는 외국인들이 비난한다고 하여 축산물가공처리법에서 개를 제외시켜서 개고기는 정부의 감시를 받지 않고 유통되고 있다. 국민들의 개고기 식용 합법화요구에 행정부는 동물보호단체의 항의를 이유로 합법화할 수 없다고 하고 있지만 국민의 80% 정도는 개고기 식용을 찬성하며, 합법화해야 한다고 주장하고, 입법부는 국회의원 20명이 개고기 식용 합법화 법안을 제출하였고, 사법부도 개고기를 식육이라고 판결하였다. 서구인들이 한국의 개고기 식용을 비난하는 내면에는 순수한 동물보호도 있지만 유색인종에 대한 인종차별, 한국에 대한 쇠고기 수출량 증가, 버린 개를 애완견 사료로 사용하기 위한 관심 돌리기, 동물보호 단체의 기금 모금 등의 목적이 있다. 그리고, 정부는 국내 동물보호 관련단체를 앞세워서 개고기 식용 반대 여론을 호도하고, 농림부는 동물보호법을 관할하여 개고기 식용을 반대하는 관련 단체의 편을 들고 있으나 이들 단체는 농민들이 아니다. 나아가 정부는 개고기 식용 문제를 해결할 의지를 보이지 않고, 해결책을 제시하지 못하여 사태를 악화시키고 있다. 그래서 개고기 식용은 위생의 사각지대에 놓여 있고, 개도축 폐기물은 환경을 오염시키고 있다. 이런 문제를 해결하려면 개고기 식용을 합법화시켜서 개고기를 위생적으로 유통시키고, 환경오염을 방지하고, 세수를 증대시키고, 국가의 자존심을 확립해야 한다. 나아가, 농림부는 동물보호법을 환경부 관할로 넘겨서 멸종위기의 동물만 다루고, 정부는 개고기 식용에 대한 정확하고 객관적인 조사와 통계를 바탕으로 신뢰성 있는 정책을 펴야 한다. 그리고 한국의 개고기 음식문화를 세계에 널리 알릴 전담 부서와, 연구소를 설립하고, 민간 기구도 지원하여 발족시켜야 한다. 개고기는 한국을 대표하는 음식으로 가장 세계적인 음식이 될 수 있기 때문이다.
Objective: To compare the clinical results and pregnancy outcomes of in vitro fertilization (IVF) between GnRH antagonist cycles and GnRH agonist (GnRH-a) cycles including flare-up and long protocol in women with advanced age. Materials and Methods: Retrospective clinical study. From January 2001 to September 2003, IVF cycles of female patient 37 years over were included in this study. GnRH-a long protocol (62 cycles, 61 patients) and GnRH antagonist multi-dose flexible protocol (66 cycles, 51 patients) were compared with the control group of GnRH-a flare-up protocol (151 cycles, 138 patients). IVF cycles for non-obstructive azoospermia (NOA), endometriosis III, IV and polycystic ovarian syndrome (PCOS) were excluded in this study. Clinical results such as total gonadotropin dose, serum E2 on hCG administration, the number of retrieved oocytes and the pregnancy outcomes - clinical pregnancy rate (CPR), implantation rate (IR) and live birth rate (LBR) per embryo transfer - were compared. Results: There were significant differences in the total dose of gonadotropin (GnRH-a flare-up vs. GnRH-a long vs. GnRH-antagonist; 41.8 vs. 54.7 vs. 24.8), serum E2 on hCG administration (1787.2 vs. 1881.6 vs. 788.0), the numbers of retrieved oocytes (8.1 vs. 11.1 vs. 4.5) and endometrial thickness (9.1 vs. 10.4 vs. 8.0) which were significantly lower in GnRH-antagonist cycles. But pregnancy outcomes shows no significant differenced in CPR (25.0% vs. 35.8% vs. 24.5%), IR (11.7% vs. 12.3% vs. 10.1%) and LBR (15.8% vs. 28.3% vs. 15.1%) Conclusion: In women with advanced age, GnRH-antagonist cycles can result in comparable pregnancy outcomes to GnRH-a cycles including flare-up and long protocol. GnRH-a long protocol show higher CPR, IR and LBR than GnRH antagonist multi-dose flexible protocol and flare-up protocol without significant differences.
Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.
Coenzyme Q10(CoQ10)은 피부를 포함한 모든 생체조직에 존재하는 널리 알려진 조효소이다. 전자전달에 관여하는 퀴논링은 세포에서 에너지를 생성하기 위한 매우 중요한 기능을 가지고 있다. CoQ10은 피부에서 항산화제로서 연구되어 왔으며, 최근 외용제로써 노화억제와 주름개선작용에 대해 보고된 바 있다. 이런 보고들은CoQ10이 항산화제로서 산화-환원작용을 통해 피부의 방어기능에 중요한 역할을 한다는 점을 시사하며, 일반적으로 산화-환원작용은 피부에서 흑화과정의 조절에도 많은 영향을 미친다. 따라서 본 연구자들은 CoQ10 이 피부의 색소조절기능이 있는지 알아보고자 하였다. 인체 정상 색소세포에CoQ10을 0.05-0.5 mM 처리한 결과 0.5, 0.25mM에서 멜라닌의 생합성을 약 50% 저해하였으며 이는 알려진 미백제인 Kojic acid나 vitamin C와 유사한 수준이었다. 또한, CoQ10은 인체 정상 색소세포에서 자외선이나 세포내 cAMP 증가 유도물질에 의한 멜라닌 생성을 억제하였다. 그러나 tyrosinase inhibitor인 kojic acid와는 달리, in vitro tyrosine hydroxylase의 억제효과는 보이지 않았다. CoQ10을 자외선으로 tanning을 유도시킨 brown guinea pig에 4주간 도포하고 육안 및 chromameter를 이용하여 미백효과를 측정한 결과, vehicle처리군에 비해 미백효과가 있음을 확인할 수 있었다. 이상의 결과에서 coenzyme Q10 은 in vitro및 in vivo에서 미백효과를 지닌 물질임을 확인할 수 있었다.
청보리 신품종 '유호'는 까락이 없어 가축 기호성이 높지만 수확 시 곡실의 탈립이 많아 수량 및 영양적 손실이 큰 기존 삼차망 품종 '유연'의 단점을 개선하기 위하여 1999년에 내탈립 삼차망인 수원339호를 모본으로 하고, 보리호위축병에 강하고 총체적성에 좋은 수원355호를 부본으로 교잡하여 계통육종법에 의하여 제반 특성이 우수한 'SB992047-B-B-B-6-2' 계통을 선발, 생산력검정시험과 지역적응시험을 거쳐 2008년에 육성되었다. 그 특성을 요약하면 다음과 같다. 1. '유호'는 직립 초형으로 파성이 II 정도이며, 잎은 녹색이면서 넓고, 줄기 굵기는 중간 정도이며, 이삭은 길고 까락은 삼차망이다. 2. '유호'의 초장은 106 cm로 대비품종인 '유연'에 비해 장간형이었고, $m^2$당 분얼수는 684개로 '유연'보다 36개 많은 다얼성이었으며, 평균 출수기와 성숙기는 각각 4월 24일과 5월 26일로 '유연'과 비슷하였다. 3. '유호'는 '유연'보다 추위에 약하였으나 도복에 강하였고, 호위축병은 익산(III형), 나주(I형), 진주(IV형) 등 모든 지역에서 저항성을 보였다. 4. '유호'의 건물수량은 전작에서 14.1 ton/ha, 답리작에서 10.9 ton/ha으로 '유연'보다 3~4% 정도 낮았다. 5. '유호'는 '유연'에 비해 황숙기에 곡실의 탈립 정도가 매우 낮았고, 조사료 품질은 조단백질 함량 9.3%, ADF 25.0%, TDN 69.2%로 '유연'과 대등하였으며, 젖산 함량은 14.5%로 13.1%인 '유연'에 비해 높았고, 사일리지 등급은 II 등급으로 양호하였다.
이 논문은 아시아태평양전쟁 시기에 일본군 군속으로 배속된 한국인이 일본군포로수용소에서 연합군 포로에 대한 학대혐의로 전범이 된 한국인 BC급 전범문제에 대한 일본의 공문서관의 자료 현황을 파악하여 한일아카이브의 가능성을 모색한 글이다. 일본정부는 포츠담선언의 수락을 통해서 전쟁범죄에 대한 재판을 수락하였고, 연합군은 극동군사재판(동경재판)과 아시아 각 지역에서 BC급 전범 재판을 진행하였다. 하지만, 일본의 전범 재판속에는 일본인 전범만이 아닌 일본의 식민지 출신인 한국인 대만인도 다수가 전범으로 기소되었고, 이들의 명예회복 및 보상 및 배상 문제는 냉전기간 동안 한일양국정부에 의해서 방치된 상태였으며, 관련 자료의 공개도 한정되었다. 한국인 BC급 전범관련 기록은 국립공문서관이 각 성에서 이관되어 받은 자료가 대부분이고, 그 내용은 주로 연합국에 의한 전범 재판의 기록 복사본, 그리고 일본정부의 각 부처가 향후 독립된 이후 일본 전범의 명예회복을 위해서 준비한 종합정리 형태의 기록 등이 대부분이다. 외교사료관의 경우, 전범과 BC급 전범의 일본 국내 이송과 관련된 외교 현황이 주된 내용이고, 한국 및 대만 등의 경우, BC급 전범의 송환을 위한 협상의 자료들이 존재하고 있는 것으로 보인다. 반면, 아시아역사자료센터는 그 설립목적이나 활동내용을 보면, 한일간의 식민지관련 공동의 아카이브 구축을 위해서 활용도가 매우 높은 시설이라고 할 수 있다. 따라서 향후 한일식민지관련 아카이브구축에 있어서 아시아역사자료센터의 현재의 문제점들을 개선하여 공동 활용을 할 필요성이 있다고 할 수 있다.
이 연구에서는 전기화학적 임피던스분광법(Electrochemical Impedance Spectroscopy, EIS)을 활용하여 콘크리트 속 철근 부식의 개시, 전파 및 이로 인한 콘크리트의 손상을 관찰하기 위한 실험을 수행하였다. 먼저, 직경 25mm, 높이 70mm 원주형 콘크리트 실험체 중심에 지름 5mm의 탄소강봉을 매입한 실험체를 제작하였다. 실험체에 사용된 콘크리트는 물-시멘트 비 0.4, 0.5, 0.6을 갖는 세 가지 배합을 제작하였다. 촉진부식시험을 수행하여 위하여 철근 콘크리트 실험체는 0.5M NaCl 수용액에 침지한 후 0C, 13C, 65C, 130C의 네 가지 수준의 전하량을 인가하였다. 이 연구에서는 부식촉진 및 이 과정에서 EIS의 주기적 모니터링을 자동화하여 실험의 효율을 향상시켰다. 이 연구의 실험 결과를 통하여 EIS 주요 특성인자를 활용하여 콘크리트 속 철근의 부식상태를 효과적으로 평가할 수 있음을 확인하였다. 전하이동저항(Rc)값은 전하인가량이 0C에서 13C로 증가함에 따라 급격히 감소하여 대략 10kΩcm2 값을 나타내었다. 하지만 부식개시 이후 전하인가량을 13C에서 130C로 증가하였을 때 Rc값의 민감도는 현저히 감소하는 것을 확인하였다. 한편 이중층용량값(Cdl)값은 전하인가량이 0C에서 130C로 증가함에 따라 대략 50×10-6μF/cm2 에서 250×10-6μF/cm2 수준으로 선형비례관계를 보였다. 이러한 결과는 Cdl 모니터링을 통하여 부식물질에 팽창에 따라 유발된 콘크리트 내부 손상의 진전을 효과적으로 평가할 수 있음을 보여준다. 이 연구의 결과는 EIS를 활용하여 콘크리트 속 철근 부식의 확산 및 이에 따른 콘크리트 손상의 실시간 모니터링을 위한 매입형 센서 및 EIS 신호 분석방법의 고도화를 위한 기본 데이터를 제공하는데 의미가 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.