• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2001년도 Proceedings of 6th International Joint Symposium on Microeletronics and Packaging
• /
• pp.35-43
• /
• 2001

Flip chip assembly on organic substrates using ACAs have received much attentions due to many advantages such as easier processing, good electrical performance, lower cost, and low temperature processing compatible with organic substrates. ACAs are generally composed of epoxy polymer resin and small amount of conductive fillers (less than 10 wt.%). As a result, ACAs have almost the same CTE values as an epoxy material itself which are higher than conventional underfill materials which contains lots of fillers. Therefore, it is necessary to lower the CTE value of ACAs to obtain more reliable flip chip assembly on organic substrates using ACAs. To modify the ACA composite materials with some amount of conductive fillers, non-conductive fillers were incorporated into ACAs. In this paper, we investigated the effect of fillers on the thermo-mechanical properties of modified ACA composite materials and the reliability of flip chip assembly on organic substrates using modified ACA composite materials. Contact resistance changes were measured during reliability tests such as thermal cycling, high humidity and temperature, and high temperature at dry condition. It was observed that reliability results were significantly affected by CTEs of ACA materials especially at the thermal cycling test. Results showed that flip chip assembly using modified ACA composites with lower CTEs and higher modulus by loading non-conducting fillers exhibited better contact resistance behavior than conventional ACAs without non-conducting fillers. Microwave model and high-frequency measurement of the ACF flip-chip interconnection was investigated using a microwave network analysis. ACF flip chip interconnection has only below 0.1nH, and very stable up to 13 GHz. Over the 13 GHz, there was significant loss because of epoxy capacitance of ACF. However, the addition of $SiO_2filler$ to the ACF lowered the dielectric constant of the ACF materials resulting in an increase of resonance frequency up to 15 GHz. Our results indicate that the electrical performance of ACF combined with electroless Wi/Au bump interconnection is comparable to that of solder joint.

• 전자공학회논문지D
• /
• 제36D권8호
• /
• pp.45-53
• /
• 1999

접지된 유전체층 위의 유한한 개수의 도체스트립에 의한 전자기 산란문제를 TM편파의 경우에 대하여 송수신 누설파 안테나와 격자결합기의 관점에서 고려하였다. 도체스트립에 유기된 전류를 미지수로 하는 적미분 방정식을 유도하고 모멘트법을 이용하여 풀었다. 도체스트립에 걸쳐서 특정한 전원(전류) 분포를 갖는 비균일한 누설파 구조를 구성하기 위하여 누설파 구조를 따라 인접하는 스트립들 사이의 거리의 스트립의 폭이 함께 변화되었다. 도체스트립의 전류분포 및 표면파 전력에 대한 해석결과들로부터 적절히 구성된 비균일한 누설파 구조의 수신 누설파 안테나 및 적자결합기 관점에서의 최대 결합효율이 균일한 구조에서의 80%에 비해 15%정도 개선된 95%가 됨을 관찰하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제16권3호
• /
• pp.169-180
• /
• 2012

The steady hydromagnetic flow of an electrically conducting non-Newtonian fluid due to the rotation of an infinite disk is studied with heat transfer with the inclusion of the ion slip as well as Ohmic heating. The governing nonlinear momentum equations and energy equations are solved using the finite difference method. The numerical results indicate the important effect of the ion slip and the non-Newtonian fluid characteristics on the velocity and temperature distributions.

• 멤브레인
• /
• 제27권5호
• /
• pp.389-398
• /
• 2017

연료전지용 고분자 전해질막에 있어서 가장 중요한 특성인 수소이온 전달 능력은 내부에서 형성되는 수화채널의 분포 및 형상에 큰 영향을 받게 된다. 비과불화탄소계인 탄화수소계 전해질막의 경우, 과불화탄소계 전해질막인 나피온에 비하여 이러한 수화채널이 약하게 형성되는 것으로 알려져 있으며 따라서 상대적으로 낮은 이온전달 성능을 나타내는 것으로 보고되고 있다. 본 연구에서는 컴퓨터를 이용한 전산모사 기술의 하나인 메조스케일 전산모사 기술을 이용하여 탄화수소계 연료전지용 전해질막인 술폰화 폴리이미드의 가습조건에서의 수화채널 형성 및 상분리 현상을 관찰하였다. 이를 통하여 술폰화 폴리이미드 내부에서 물분자 비드는 친수성 영역 전체에 걸쳐서 고르게 분포되며 명확한 수화 클러스터는 높은 술폰화도에서만 형성되는 것이 관찰되었다. 또한, 술폰화 폴리이미드 모델은 저가습 상태에서 수화 채널을 형성하는데에 나피온 모델에 비하여 더 어렵다는 것이 관찰되었다. 이러한 결과들은 비과불화불소계인 탄화수소계 전해질막의 수화채널 형성에 대한 기존 이론을 명확하게 뒷받침하고 있으며, 술폰화 폴리이미드의 전도도 경향도 잘 설명을 하고 있다. 따라서 메조스케일 전산 모사 기술은 연료전지용 전해질막의 상분리 현상 및 수화채널을 분석하고 이온전도 특성을 규명하는 데에 있어서 매우 효과적인 기술이 될 수 있다는 것을 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권6호
• /
• pp.679-688
• /
• 2021

This study is a questionnaire about the lesson environment that radiation major students prefer in a non-face-to-face live online lesson environment for a total of 133 students, 65 second graders and 68 third graders who are enrolled in the department of radiology at a university located in the Seoul metropolitan area. And checked the satisfactory level by grade. The questionnaire consists of three categories: 1st real-time non-face-to-face lectures, 2nd professor lectures, and 3rd corona lectures. A total of 14 questions, with multiple choice and descriptive response methods. As an evaluation method, in the case of a multiple-choice question, the average was calculated using a 5-point Likert scale. As a result of conducting the independent sample T-test of the SPSS program, the response by grade was P > 0.05, and no significant result was shown by the contents of the questionnaire survey of the second grade. As for the lecture method of the department of radiology after the end of Covid-19 virus, it is better to promote face-to-face lessons in radiation training subjects and non-face-to-face real-time education in subjects centered on radiation theory.

• The Journal of Asian Finance, Economics and Business
• /
• 제9권5호
• /
• pp.507-518
• /
• 2022

This study aimed to measure the monetary and non-monetary effects on brand awareness at hypermarkets in Riyadh. The independent variable consists of three sub-variables: price reductions, free samples, and purchasing vouchers. The research population has all Saudi and non-Saudi buyers in Riyadh. The figures show that the population size reached 3.87 million in 2019. The proportional stratification sampling technique and the recommended sample size were 387 buyers. The five-point Likert scale with the fully structured questionnaire was used. The study concldes the effect of free samples on brand awareness while there was no effect of monetary instruments. The results show that the three sales promotion incentives (price reduction, free samples, and purchasing vouchers) moderately affected brand awareness and a key role in explaining consumer behavior, so the significant impact was proved. In summary, this study showed that price reductions have the power of creating the perception of buyers at hypermarkets in Riyadh. Non-cash instruments were more effective than cash instruments in enhancing brand awareness at the hypermarkets in the Saudi market. So, the price reductions and purchasing vouchers have less power in conducting communication-based awareness. Building awareness and improving brand image through free samples were most visible in communication strategy.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.9-17
• /
• 2014

PURPOSES : The purpose of this study is to assess removal efficiency of non-point pollutants and applicability for non-point pollutant reduction facilities by conducting the demonstration project operation. METHODS : In order to analyze removal efficiency of non-point pollutants for facilities such as a grassed swale, a small constructed wetland, a free water surface wetland, a horizontal sub-surface flow wetland, and a sand filtration, the field data including specifications of facilities, rainfall, inflow and runoff rainfall effluent etc. was acquired after occurring rainfall events, and the acquired data was analyzed for removal efficiency rate to assess road non-point pollutants facilities using event mean concentration (EMC) and summation of load (SOL) methods. RESULTS : The results of analyzing rainfall effluent, non-point pollutant sources showed that total suspended solid (TSS), chemical oxygen demand (COD), biochemical oxygen demand (BOD), total nitrogen (TN), total phosphorus (TP), chrome (Cr), zinc (Zn), and lead (Pb) can be removed through non-point pollutant reduction facilities by 60.3% ~ 100%. Especially removal efficiency of TSS, COD and BOD is relatively higher than removal efficiency of other non-point pollutant sources in all kind of non-point pollutant facilities. CONCLUSIONS : Based on the result of this study, even though natural type of non-point pollutant reduction facilities for roads occupy small areas comparing with drainage basin areas, most of non-point pollutant sources would be removed through the facilities.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.61-64
• /
• 2001

Levitation force of a new magnetic levitation system using a super-conducting bulk magnet(SBM) and a permanent magnet(PM) was numerically calculated. The non-linear J-E relation of a SBM was modeled using a critical state model and iteration method, and demagnetization of a PM was considered using a demagnetization curve of a real PM. The maximum limitation of levitation force was found according to increasing the trapped field in a SBM. Finite element method was used for numerical calculation.

• Journal of electromagnetic engineering and science
• /
• 제11권1호
• /
• pp.56-61
• /
• 2011

In this paper, we consider the topological derivative concept for developing a fast imaging algorithm of thin inclusions with dielectric contrast with respect to an embedding homogeneous domain with a smooth boundary. The topological derivative is evaluated by applying asymptotic expansion formulas in the presence of small, perfectly conducting cracks. Through the careful derivation, we can design a one-iteration imaging algorithm by solving an adjoint problem. Numerical experiments verify that this algorithm is fast, effective, and stable.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.16.2-16.2
• /
• 2009

Developing a low cost printing material that can replace silver for the formation of a conducting pattern is an important issue in printed electronics. We report a novel approach using a non-oxidized copper material during the printing and sintering process under ambient conditions, which was previously considered unachievable. An attempt was made to understand the conversion process of cuprous oxide nanoparticle aggregates on metallic copper crystals through chemical reduction in the solution phase. The detailed mechanism for this conversion, including the role of the surfactant and crystal growth, was examined.