• 설비공학논문집
• /
• 제7권3호
• /
• pp.473-487
• /
• 1995

A loud speaker-driven zero-c.o.p. thermoacoustic refrigerator where an automotive catalytic converter is utilized as a stack has been fabricated and investigated experimentally. Without any heat exchangers at both ends of stack(and thus with zero c. o. p.), temperatures on the stack are measured and various heat transfer rates are calculated from the measured temperatures. Temperatures on the stack have been also calculated numerically using a finite difference method. The measured temperatures are in fair agreement with the calculated temperatures for lower frequency than 300Hz, however, the former deviates from the latter considerably for higher frequency. Two types of c. o. p. have been defined as appropriate to the experiment. While the nominal c. o. p. is zero(the condition in which the pumped heat flow rate in the pore exactly cancels the axial heat conduction down the stack), the true c. o. p. is found to be about 0.14 for 300Hz from the experiments.

• 전력전자학회논문지
• /
• 제23권2호
• /
• pp.101-105
• /
• 2018

Shortage of electric power occurs frequently along with increased electric power demand. ESS is a precaution to solve this issue. Household ESS has a capacity of approximately 3 kW/7 kWh. Household ESS batteries are typically designed with nominal voltages between 40 and 50 V. To connect household ESS with a 220 V AC system, low battery voltages in power conditioning system (PCS) should be boosted. To boost low battery voltage and match it with AC grid voltage, the use of a transformer for a commercial frequency can be considered. To attenuate switching harmonics of the household single-phase ESS-PCS, LC filter can be installed in two positions: on the primary side or on the secondary side of a transformer. A method has been used generally in single-phase inverters for the ESS-PCS. In another method, however, the output efficiency of the ESS-PCS may be decreased. Parasitic components of the transformer can affect voltage losses, when the square wave with the switching frequency in the ESS-PCS is passed through the transformer windings. In this work, the characteristics of the transformer according to the position of an LC filter are investigated for household single-phase ESS-PCS.

• 대한전자공학회논문지
• /
• 제26권3호
• /
• pp.1-7
• /
• 1989

본 논문에서는 대용량 셀룰러 이동통신 시스템에 있어 새로운 채널할당 알고리듬을 제안하였다. 새로 제안된 채널할당 알고리듬은, 고정배치된 채널이 모두 사용중인 Cell에 요구된 Call의 서비스를, Idle한 채널이 있는 인접 Cell에서 대행하도록 하였으며, 채널의 순서적인 할당, 채널의 재할당 및 지향성 안테나의 사용등의 기법을 이용하였다. 49개의 Cell로 구성된 시스템에 본 알고리듬을 Simulation 한 결과 고정채널 할당방식에 비해 18~38%의 높은 채널이용율을 나타내었다.

• 한국산업정보학회논문지
• /
• 제13권2호
• /
• pp.1-7
• /
• 2008

본 논문은 시스템 인자의 변위에 강인한 연속반복학습제어기(Repetitive Controller RC)를 설계하는 방법을 소개하고자 한다. 이 때 사용되는 불확실 인자들은 확률분포함수에 의해 무작위로 설정되게 된다. 분포함수를 직접 적용하는 대신 본 제어기는 설정된 확률함수로부터 생성된 모형을 기본으로 설계하였다. 이러한 복수모형 설계 기법으로 임의의 분포함수로 구성된 수많은 불확실 인자들을 다룰 수 있다. 그러므로, 제어기는 반복영역에서 수렴성을 보장하는 비용함수를 주파수영역에서 최소화함으로써 유도할 수 있다. 모의실험은 제안된 복수모형설계 기법으로 구한 RC가 단수모형 설계기법을 이용한 RC보다 강인한 것을 보여 주고 있다.

• 동력기계공학회지
• /
• 제9권2호
• /
• pp.65-72
• /
• 2005

A new approach is presented to design a robust sampled-data controller for an experimental flexible beam carrying an unknown payload at its free end. The purpose of this paper is to move the free end of the beam to a desired position in the specified time under vibration suppression. We derive a transfer function nominal model for the beam and quantitative description of model uncertainties based on experimentally obtained frequency response data. Robust controllers are designed by applying the sampled-data $H_{\infty}$ control and ${\mu}m-theory$, in which two types of uncertainties, structured and unstructured uncertainties, are adopted for satisfactory performance in terms of hinge position regulation and vibration damping, besides obviously asymptotic stability. The effectiveness of the proposed method is confirmed through simulation and experimentation.

• 한국수산과학회지
• /
• 제23권6호
• /
• pp.443-450
• /
• 1990

The virtual population analysis technique was applied to the silver croaker, Otolithes argenteus, stock based on length frequency composition, age-length key and nominal catches taken by the trawl fleet and fixed-stake nets in the Kuwait's waters during $1981\~1988$. One-year-old fish was dominant, whereas three-year-old and older fish were at a very low level. Fishing mortality was much higher in the age groups of 2 and 3 than in the others. A strong year-class occurred in 1980 and 1981. Population size of fishable stock markedly decreased from 1982 to 1985 and remained at a low level during $1986\~1987$. The effects of changes in fishing effort showed that an increase in fishing effort would not lead to benefits in yield and would comprise more young and fewer old fish, whereas a reduction in fishing effort to a certain level (by $20\~40\%$ ) from the fishing effort level on the average during $1981\~1988$ could bring some small advantage to the fishery consisting of fewer young and older fish.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.423-426
• /
• 2007

Pohang Wind Energy Research Center (PoWER-C) is developing a 3 MW Radial Flux Permanent Magnet (RFPM) Synchronous Generator for offshore Wind Energy Converter (WEC). The rotor rpm is 15.7 and the gear ratio is set to be 92.93. The nominal generator rpm at the rated load is about 1459. To reduce the switching loss in the power electronics, the maximum frequency is limited to 100 Hz. This requirement limits the number of pole to six or eight. Permanent magnet excitation is assumed for higher energy yield and higher efficiency. In this report, the requirements and the first efforts for the physics design are described.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.228-230
• /
• 2008

A LLC resonant converter with hold-up time extension technique for computer power supply is proposed. Since the proposed circuit has a current boost-up capability of resonant inductor regardless of the input voltage level and the load power condition, operating near the resonant frequency, it can provide the power to the load as the input voltage drops to half of reflected output voltage to the transformer primary. This extends the hold-up time of computer power supply and improves the system power density and conversion efficiency at nominal input voltage. The experimental results with prototype are given to confirm the validity of the proposed circuit.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.460-463
• /
• 2004

There is a trend to replace TWTA of SSPA in S-Band uplink application for satellite operation. KARI developed l20W full S-Band SSPA system in early 2004. This paper covers SSPA system design and its test results. Through tests, nominal gain of 57dB, gain stability of +/-1dB over frequency, and gain stability of +/-0.5dB over temperature were shown. IMD value of -16.5dBc, -19dBc were revealed in PI and P3 output operations. With meeting specifications, l20W SSPA is expected to be used in operational S-Band uplink application.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1070-1072
• /
• 1999

Automatic Generation Control(AGC) is a control system whose objectives are to hold system frequency close to a specified nominal value and to maintain each unit's generation at the most economic value. It has been used to control the output of a generator by the control signal of the generator, but it is not appropriate to apply to generators which adopt the distributed control system. In this paper a method for improving the AGC operation is proposed, and the different response of each generator and various types of control systems of generators are considered. The interface among Remote Terminal Detector(RTU) and control systems and the direct delivery of the data between EMS and DCS also are proposed in the paper.