• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.423-428
• /
• 2008

The monitoring efficiency of the aircraft noise monitoring stations is decided to the reference noise level and the infringement of each monitoring stations. We are calculate the monitoring efficiency of three noise monitoring stations among twelve in the vicinity of Gimpo Int'l Airport. As a result, the monitoring efficiency shows that the noise monitoring stations #3,#5 and #6 are 14.3%, 18.5% and 29.3% respectively, #6 which is underneath the flight track is higher efficiency than another two stations.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.50-55
• /
• 2009

The monitoring efficiency of the aircraft noise monitoring stations is decided to the reference noise level and the infringement of each monitoring stations. We calcurates the monitoring efficiency of three noise monitoring station among twelve in the vicinity of Gimpo Int'l Airport. As a result, the monitoring efficiency shows that the noise monitoring stations No#3, No#5 and No#6 are 14.3%, 18.5% and 29.3% respectively, Among them No#6 staion looks higher efficiency than another two stations because of underneath the flight trackas.

• 한국소음진동공학회논문집
• /
• 제23권12호
• /
• pp.1056-1065
• /
• 2013

Noise generated from Construction site has been raised most civil complaints to 64.4 % among the environmental pollution in 2011. Therefore, local government recommends and prescribes that construction sites over a certain scale install sound level meter for noise monitoring. For example, Seoul has implemented a 24 hour noise monitoring system, with real time communication, to the large construction sites more than 10,000 $m^2$ from the end of August 2012. But it is difficult to use noise measurement data for the construction noise assessment, since the installation standards and technical specifications for construction noise monitoring system are not presented. In this paper, we proposed noise monitoring system improvement plan including technical specifications and installation standards using the investigating results of the problems of current noise monitoring system and the foreign cases.

• 한국환경과학회지
• /
• 제23권7호
• /
• pp.1307-1320
• /
• 2014

A number of problems associated with environmental noises in urban areas have significantly been considered. Specific measurement and estimation of the environmental noise became a primary issue in local governments. Environmental noise monitoring system is required in order to estimate and verify the a city noise map. However, current monitoring positions may not perfectly represent and incorporate many different view points, such as districts of a city, different utilizations of a city by the law, populations, and classifications and traffics of roads. In addition, scientific method to provide specific noise monitoring positions my not be avaliable in current literature. For this reason, the primary objective of this paper is to propose a new method for introducing a number of monitoring positions in the entire city. First, the quality function deployment (QFD) method was utilized to simultaneously represent both districts and utilizations of a city. Second, a new algorithm to find a number of monitoring positions was proposed by compromising many different view points: populations, classifications of roads and areas, and traffics of roads. Finally, the proposed monitoring positions and a sample noise map was provided for verification purposes. Based on these results, the proposed algorithm including the QFD concept may successfully provide specific noise monitoring positions by simultaneously consider may different view points and requirements of a city.

• 한국ITS학회 논문지
• /
• 제8권2호
• /
• pp.60-66
• /
• 2009

Acceleration Noise는 교통류의 안정성을 진단하는데 중요한 지표이다. 하지만, 기존의 연구에서는 개별차량의 Acceleration Noise에 대해서만 수행되었고, 거시적 관점에서의 Acceleration Noise에 대해서는 연구가 이루어지지 않은 실정이다. 본 논문에서는 거시적 교통류 모니터링 지표인 Network Acceleration Noise를 제안하고, 이를 분석하여 거시 교통류 모니터링 활용방안에 대한 연구를 수행하였다.

• 환경정책연구
• /
• 제8권1호
• /
• pp.31-48
• /
• 2009

부산시 환경소음수준의 연속적 측정이 가능한 소음자동측정 망의 합리적 설치 운영은 부산시의 정온한 환경구축 정책 수립을 위한 중요한 관건이 될 수 있다. 도시 내의 환경소음 수준은 지역 환경수준에 영향을 미치는 제반 요인들의 복합적 작용에 의하여 결정된다. 따라서 정확한 환경소음수준의 측정이 선결되어야만 올바른 환경소음 개선대책의 수립과 추진이 가능하다. 현재 국내에서는 환경소음 실태파악 및 소음저감정책 기초 자료의 확보를 위해 최근에 소음자동측정 망을 구축 중에 있다. 또한 소음측정 망이 설치 운영되는 지역의 경우 측정망 자료의 공개를 통하여 해당 지역의 환경소음 수준을 표시하고 있으나, 측정결과가 시민들이 느끼는 체감 소음을 제대로 반영하지 못하는 것으로 인식되고 있다. 가장 주된 논거는 측정 자료의 신뢰성 부족과 측정망의 불합리한 설치장소로 요약할 수 있다. 본 연구는 현재 부산시 지역에 설치되어 있는 8개 소음자동측정 망의 설치 운영실태 분석에 주안점을 두고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.241-245
• /
• 2005

This study introduces the wind turbine (W/T) noise evaluation procedure required in the international standard (IEC 61400-11) and monitoring system for the evaluation. Noise emission characteristics of a 750kW W/T generator is investigated. Test and evaluation are performed on J48 W/T model which is under operation in Daekwanryung Wind Test Site. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level and tonality of the W/T are estimated under the wind speeds required by the international standard.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권6호
• /
• pp.440-444
• /
• 2016

In this paper, an equivalent circuit model for near-field noise emission is proposed to implement a multimedia operation-monitoring system for mobile devices. The proposed model includes a magnetic field probe that captures noise emissions from multimedia components, and a transfer function for near-field noise coupling from a transmission line source to a magnetic field probe. The proposed model was empirically verified with transfer function measurements of near-field noise emissions from 10 kHz to 500 MHz. With the proposed model, a magnetic field probe was optimally designed for noise measurement on a camera module and an audio codec in a mobile device. It was demonstrated that the probe successfully captured the near-field noise emissions, depending on the operating conditions of the multimedia components, with enhanced sensitivity from a conventional reference probe.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.698-698
• /
• 2014

According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90% among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90%. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.

• 한국소음진동공학회논문집
• /
• 제18권4호
• /
• pp.458-464
• /
• 2008

The structural health monitoring has been gaining more importance in civil engineering areas such as earthquake and wind engineering. The use of health monitoring system can also provide tools for the validation of structural analytical model. However, only few structures such as historical buildings and some important long bridges have been instrumented with structural monitoring system due to high cost of installation, long and complicated installation of system wires. In this paper, the structural monitoring system based on cheap and wireless monitoring system is investigated. The use of advanced technology of micro-electro-mechanical system(MEMS) and wireless communication can reduce system cost and simplify the installation. Further the application of wireless MEMS system can provide enhanced system functionality and due to low noise densities. Identification results are compared to ones using data measured from traditional accelerometers and results indicate that the system identification using wireless MEMS system estimates system parameters accurately.