• Journal of Digital Convergence
• /
• v.14 no.4
• /
• pp.277-283
• /
• 2016

This study proposed new methods to classify normal and epileptic seizure signals from EEG signals using peaks extracted by wavelet transform(WT) and Hilbert transform(HT) based on a neural network with weighted fuzzy membership functions(NEWFM). This study has the following three steps for extracting inputs for NEWFM. In the first step, the WT was used to remove noise from EEG signals. In the second step, the HT was used to extract peaks from the wavelet coefficients. We also selected the peaks bigger than the average of peaks to extract big peaks. In the third step, statistical methods were used to extract 16 features used as inputs for NEWFM from peaks. The proposed methodology shows that accuracy, specificity, and sensitivity are 99.25%, 99.4%, 99% with 16 features, respectively. Improvement in feature selection method in view to enhancing the accuracy is planned as the future work for selecting good features from 16 features.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.604-610
• /
• 2010

In this paper we proposed FSFN (Filter bank sub-band energy subtraction based CLSFN) method to improve the recognition performance of the existing CLSFN (Cepstral distance and Log-energy based Silence Feature Normalization). The proposed FSFN reduces the energy of noise components in filter bank sub-band domain when extracting the features from speech data. This leads to extract the enhanced cepstral features and thus improves the accuracy of speech/silence classification using the enhanced cepstral features. Therefore, it can be expected to get improved performance comparing with the existing CLSFN. Experimental results conducted on Aurora 2.0 DB showed that our proposed FSFN method improves the averaged word accuracy of 2% comparing with the conventional CLSFN method, and FSFN combined with CMVN (Cepstral Mean and Variance Normalization) also showed the best recognition performance comparing with others.

• Journal of Environmental Health Sciences
• /
• v.30 no.3
• /
• pp.272-282
• /
• 2004

Stress is a primary health promotion issue in worksite research because psychological distress is closely related not only to workers　 health status but also to their job performance. This study identified the work environment and work condition factors affecting workers　 stress symptoms among the Korean manufacturing factory workers. A total of 7,818 factory workers employed in 1,562 manufacturing companies participated in the Korean nation-wide occupational health survey conducted by the Korean Occupational Safety and Health Agency in 2003. Participants were selected by the stratified proportional sampling process by standardized industry classification, company size, and locations. Trained interviewers visited the target companies and interviewed the factory workers randomly selected in each company. Work environments included physical work environments (temperature, noise, hazardous organic compounds, and so on) and psychological work environments (job demands, job control, and social support at work), and work conditions included daily working hour, rest time, and so on. Men were 71.5% and the mean age was 34.0 years old. The average working period in the present company was 6.9 years. The average stress score was 26.2 under the perfect score, 50, which means the moderate level of stress. Perceived stress had significant correlations with young age, poor physical work environment, high fatigue, bad perceived health status, and high job demands in Pearson's simple correlation analysis. Perceived health status and perceived fatigue explained 21% variance of stress symptoms and the work environment factor explained 4.8% of that; however, work condition did not have the sufficient effect. In particular, psychosocial work environment variables (job demand, job control, and social support at work) had a clear effect on stress symptoms rather than the physical work environments. Poor perceived health status, severe perceived fatigue, poor physical work environment, high job demands, low social support, heavy alcohol consumption and little exercise were significantly related to high stress symptoms in the Korean manufacturing workers.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.120-126
• /
• 2020

We present a user recognition method using human body impulse response signals. The body compositions vary from person to person depending on the portion of water, muscle, and fat. In the body communication study, the body has been interpreted circuit models using capacitance and resistances, and its characteristics are determined by the body compositions. Therefore, the individual body channel is unique and can be used for user recognition. In this paper, we applied pseudo impulse signals to the left hand and recorded received signals from the right hand. The empirical mode decomposition (EMD) method removed noise from the received signals and 10 peak values are extracted. We set the differences between peak amplitudes as a key feature to identify individuals. We collected data from 6 subjects and achieved accuracy of 97.71% for the user recognition application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.533-540
• /
• 2004

This paper proposes a new multispectral image data compression algorithm that can efficiently reduce spatial and spectral redundancies by applying classified prediction, a Karhunen-Loeve transform (KLT), and the three-dimensional set partitioning in hierarchical trees (3-D SPIHT) algorithm in the wavelet transform (WT) domain. The classification is performed in the WT domain to exploit the interband classified dependency, while the resulting class information is used for the interband prediction. The residual image data on the prediction errors between the original image data and the predicted image data is decorrelated by a KLT. Finally, the 3-D SPIHT algorithm is used to encode the transformed coefficients listed in a descending order spatially and spectrally as a result of the WT and KLT. Simulation results showed that the reconstructed images after using the proposed algorithm exhibited a better quality and higher compression ratio than those using conventional algorithms.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.1
• /
• pp.71-78
• /
• 2015

Although there are differences in the classification of category adopted by each country, small UAS is usually classified as the one less than 25 kg. UAS has been mainly used for military and public purposes, but in recent years, it has spread to the private sector for hobby, media, and so on. Especially, considering the nature of the operating region and applications, it is necessary to improve operating time, noise and vibration in small UAS to ensure the same level of safety with a manned aircraft. This is because the drone can pose health and safety hazard through collision with manned aircraft or crashing into the ground. In this paper, we investigated operational regulations in the United States and European countries. Based on the investigation, a domestic system development plan for small UAS operation is under development.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.10 no.3
• /
• pp.221-228
• /
• 2016

In this paper, we introduce our simulation software for EEG signal accuracy improvement. Users can check and train own EEG signal accuracy using our simulation software. Subjects were shown emotional imagination condition with landscape photography and logical imagination condition with a mathematical problem to subject. We use that EEG signal data, and apply Independent Component Analysis algorithm for noise removal. So we can have beta waves(${\beta}$, 14-30Hz) data through Band Pass Filter. We extract feature using Root Mean Square algorithm and That features are classified through Support Vector Machine. The classification result is 78.21% before EEG signal accuracy improvement training. but after successive training, the result is 91.67%. So user can improve own EEG signal accuracy using our simulation software. And we are expecting efficient use of BCI system based EEG signal.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.5
• /
• pp.479-493
• /
• 2016

LiDAR(Light Detection and Ranging) data acquired from ALS(Airborne Laser Scanner) has been intensively utilized to reconstruct object models. Especially, researches for 3D modeling from LiDAR data have been performed to establish high quality spatial information such as precise 3D city models and true orthoimages efficiently. To reconstruct object models from irregularly distributed LiDAR point clouds, sensor calibration, noise removal, filtering to separate objects from ground surfaces are required as pre-processing. Classification and segmentation based on geometric homogeneity of the features, grouping and representation of the segmented surfaces, topological analysis of the surface patches for modeling, and accuracy assessment are accompanied by modeling procedure. While many modeling methods are based on the segmentation process, this paper proposed to extract key points directly for building modeling without segmentation. The method was applied to simulated and real data sets with various roof shapes. The results demonstrate feasibility of the proposed method through the accuracy analysis.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.3
• /
• pp.181-189
• /
• 2004

This paper describes the method for detecting vehicles in the rear and rear-side at night by using headlight features. A headlight is the outstanding feature that can be used to discriminate a vehicle from a dark background. In the segmentation process, a night image is transformed to a binary image that consists of black background and white regions by gray-level thresholding, and noise in the binary image is eliminated by a morphological operation. In the feature extraction process, the geometric features and moment invariant features of a headlight are defined, and they are measured in each segmented region. Regions that are not appropriate to a headlight are filtered by using geometric feature measurement. In region classification, a pair of headlights is detected by using relational features based on the symmetry of a pair of headlights. Experimental results show that this method is very applicable to an approaching vehicle detection system at nighttime.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.12 no.3
• /
• pp.130-141
• /
• 2009

The spatial range of EIA is mainly related to landscape ecological factors such as topography, geology, animals, and plants. Problems were detected involved land, soil, noise, oscillation, the atmosphere, animals, and plants in the natural-environment. First of all, the current EIA lacks explicit spatial ranges and sections in terms of scientific exactitude and objectivity for assessment. Secondly, there are overlapping influence-area problems resulting in cumulative impacts of unit developments that accumulate. Finally, some developments have no regard for ecological and conservational value in relation to determining which effect ecological stability, and which should be regarded as Regional Ecological Resources. Therefore, this study suggests that EIA should be improved in the following manner. First, the standard classification of landscape unit for analysis should be established 10 regulate each spatial range on a wide-landscape scale. Secondly, the impacts resulting from the interaction of overlapping influence-area developments between individual development should be assessed. Third, Minimization of the of the environmental effects is needed by applying the cumulative effects to the influence-area where developments occur in the same time or in a sequence. Fourth, individual characteristics of landscape elements such as roads, rivers, and green networks need to be considered separately in the analysis. Finally, regional ecological habitats should be included in the analysis in order to achieve stable ecosystems.