• 한국전자통신학회논문지
• /
• 제18권1호
• /
• pp.71-76
• /
• 2023

본 논문은 음향잡음감쇠기에서 신경망 구조의 Wiener 필터를 이용하여 비선형 잡음을 감쇠시키는 방법에 대하여 연구하였다. 이 시스템은 기존의 적응필터를 이용하는 대신 신경망 위너필터를 이용한 심층학습 알고리즘으로 비선형 잡음감쇠 성능을 개선한다. 128-neuron, 8-neuron 은닉층과 오차 역전파(back propagation) 알고리즘을 이용하여 비선형 잡음이 포함된 단일입력 음성신호로부터 음성을 추정한다. 본 연구에서 비선형 잡음에 대한 감쇠 성능을 검증하기 위하여 Keras 라이브러리를 사용한 시뮬레이션 프로그램을 작성하고 모의실험을 수행하였다. 모의실험 결과, 본 시스템은 비선형 잡음이 포함되어 있는 경우에도 위너필터 대신 FNN 필터를 사용하면 잡음감쇠 성능이 상당히 개선되는 것을 볼 수 있다. 이는 FNN 필터의 복잡한 구조가 어떤 형태의 비선형 특성도 잘 표현하기 때문이다.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.594-601
• /
• 2016

Mass estimation analysis of loose-parts in pressure vessel is necessary for the structural integrity assessment of pressure boundary in nuclear power plants. Mass of loose-parts can be generally estimated from the peak values and the center frequency of impact signals. Magnitude of impact signals is, however, inevitably attenuated according to the traveling distance of the signals and depending on the frequencies. Attenuation rate must be therefore carefully compensated for the precise estimation of loose-part mass. This paper proposes a new compensation method for the attenuation rate based on Bessel function instead of Hankel function in conventional method which has a limitation of usage in near the impact location. It was verified that the suggested compensating equation based on the Bessel function can be applied to the attenuation rate calculation without any limitation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1280-1286
• /
• 2001

This paper presents some advanced and supplemental methods to enhance the accuracy in case of calculating geometric divergence attenuation, attenuation by multiple screening structures, ground attenuation at unflat surfaces of sound during propagation outdoors by the methods specified in ISO 9613-2. Moreover, a calculation method for considering short-term wind effect, specified in ASJ Model-1998, is also introduced. To verify the accuracy of adopted methods, we have carried out highway traffic noise prediction and measurement at the twelve locations appearing representative road shapes and structures, such as flat, retained cut, elevated, barrier-constructed roads. From the results, we have confirmed the predicted results show good correspondence with the measured at direct, diffracted and reflected sound fields within 30m from the center of near side lane.

• 소음진동
• /
• 제9권5호
• /
• pp.899-905
• /
• 1999

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issure in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because of the poorness of basic data and insufficiency of the existing research. Especially, in order to establish the sound insulation plan about pilling works noise with high sound pressure level and impactive, a real situation of sound characteristics about the noise of pilling works in foundation work demands more detail investigation. In this point, this study attempts to survey the characteristics of attenuation and propagation of construction equipment noise in pilling work using SIP(soil-cement injected precast pile) method with casing. And this study intends to get the basic data for establishment of a standard about construction noise.

• Journal of Mechanical Science and Technology
• /
• 제19권7호
• /
• pp.1414-1423
• /
• 2005

This paper develops and evaluates several strategies for structural vibration control with the objective of attenuating broadband noise inside a rectangular enclosure. The strategies evaluated include model-independent collocated control, model-based feedback control and a new 'modal-estimate' feedback strategy. Collocated control requires no knowledge of model parameters and enjoys the advantage of robustness. However, effective broadband noise attenuation with colocated control requires a large number of sensor-actuator pairs. Model-based con-trollers, on the other hand, can be theoretically effective even with the use of a single actuator. However, they suffer from a lack of robustness and are unsuitable from a practical point of view for broadband structural vibration applications where the dynamic models are of large order and poorly known. A new control strategy is developed based on attenuating a few structural vibration modes that have the best coupling with the enclosure acoustics. Broadband attenuation of these important modes can be achieved using a single actuator, a limited number of accelerometers and limited knowledge of a few modal functions. Simulation results are presented to demonstrate the effectiveness of the developed strategy.

• 소음진동
• /
• 제7권4호
• /
• pp.621-629
• /
• 1997

For computer aided design and costruction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.227-236
• /
• 1997

Construction equipment noise has caused much annoyance for a number of dwellers in nearby construction field and has become a very serious issue in our living environment. Therefore, in our country, a practical solution and a better method of reducing construction equipment noise are highly required in construction field. Practical solutions for the construction equipment noise, however, are very difficult because the poorness of basic data and insufficiency of the existing research. Especially, in order to establishment of sound insulation plan about pilings work noise that has highly sound pressure level and impactive, a real situation of sound characteristics about pilings work noise in foundation work demands close investigation. In this point, this study attempts to surveys the characteristics of attenuation and propagation of construction equipment noise in pilings work using SIP(soilcement injected precast pile) method. And this study intends to get the basic data for establishment of a standard about construction noise.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.554-558
• /
• 2004

In this paper, we introduce noise prediction program of HVAC system to assist low-noisy design of ship's cabin. The developed program calculates sound power levels at HVAC components considering primary and secondary noise generated by fan and duct element, duct element noise attenuation, and duct break-in noise based on the authentic empirical method suggested by NEBB and acoustic power balancing method. Sound pressure level at cabin with or without ceiling system is evaluated by the diffuse-field theory considering diffuser and duct break-out sound powers. Moreover, the program provides intuitive pre- and post-processors using modem GUI functions to help efficient modeling and evaluation of cabin and HVAC component noise. To validate the accuracy and convenience of the program, noise prediction for a HVAC system is demonstrated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.299-301
• /
• 1992

The adaptive active noise control algorithm for duct noise attenuation is considered. A new algorithm to estimate the secondary path transfer function using multiple models is presented. The computational burden of the proposed algorithm is much smaller than the existing methods, so it could be applied to the multi-channel cases. Computer simulations were done to show the effectiveness of the proposed algorithm in a duct case.

• 소음진동
• /
• 제8권4호
• /
• pp.733-740
• /
• 1998

본 논문은 덕트 내에 설치된 음향 스크린의 특성을 연구하였다. 다양한 형상의 음향 스크린의 투과 손실 측정을 통하여, 음향 스크린에 의해 생긴 두 개의 비대칭 경로가 특정 주파수에서 큰 협대역 소음 저감을 발생시킴을 알 수 있었다. 그리고, 실험과 수치적 모의 실험을 바탕으로 이러한 현상을 정확하게 설명할 수 있는 해석적 모델을 개발하였다.