• Journal of Industrial Technology
• /
• v.20 no.B
• /
• pp.3-8
• /
• 2000

Low cycle fatigue life of spheroidal graphite cast iron is determined by the morphological parameters of internal graphite. The aim of this study is to clarify the effect of the number of nodular grain of spheroidal graphite cast iron on low cycle fatigue life. Two specimens that have identical average nodular grain size by changing nodular grain volume fraction and different number of nodular grain count was tested. In this paper, the parameter governing fatigue life through fatigue test, the number of nodular grain seriously affect fatigue life and nodular grain size is no longer governing parameter of it.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.195-208
• /
• 2023

The nodular diaphragm wall (NDW) is a novel type of foundation with favorable engineering characteristics, which has already been utilized in high-rise buildings and high-speed railways. Compared to traditional diaphragm walls, the NDW offers significantly improved vertical bearing capacity due to the presence of nodular parts while reducing construction time and excavation work. Despite its potential, research on the vertical bearing characteristics of NDW requires further study, and the investigation and visualization of its displacement pattern and failure mode are scant. Meanwhile, the measurement of the force component acting on the nodular parts remains challenging. In this paper, the vertical bearing characteristics of NDW are studied in detail through the indoor model test, and the displacement and failure mode of the foundation is analyzed using particle image velocimetry (PIV) technology. The principles and methods for monitoring the force acting on the nodular parts are described in detail. The research results show that the nodular part plays an essential role in the bearing capacity of the NDW, and its maximum load-bearing ratio can reach 30.92%. The existence of the bottom nodular part contributes more to the bearing capacity of the foundation compared to the middle nodular part, and the use of both middle and bottom nodular parts increases the bearing capacity of the foundation by about 9~12% compared to a single nodular part of the NDW. The increase in the number of nodular parts cannot produce a simple superposition effect on the resistance born by the nodular parts since the nodular parts have an insignificant influence on the exertion and distribution of the skin friction of NDW. The existence of the nodular part changes the displacement field of the soil around NDW and increases the displacement influence range of the foundation to a certain extent. For NDWs with three different nodal arrangements, the failure modes of the foundations appear to be local shear failures. Overall, this study provides valuable insights into the performance and behavior of NDWs, which will aid in their effective utilization and further research in the field.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.5 no.6
• /
• pp.55-62
• /
• 1982

Mechanical characteristics of nodular graphite cast iron has found to tan higher utilization to the gray cast iron. So, Nodular graphite cast iron is used as a basic material in mechanical industry. Great demand of Nodular graphite cast iron is expected to increase due to the sharp development in mechanical and automobile industry. Therefore, Nodular graphite cast iron requires not only good quality product but experienced skills in manufacturing process. But there exist a lot of difficulties to manufacture nodular graphite cast iron than gray cast iron in manufacturing process. In this study, the following topics are studied for good quality product of nodular graphite cast iron. $\circled1$ Activities of managerial staff. $\circled2$ Qualite control method in manufacturing process. $\circled3$ Manufacturing process system. As a result of the study, a intensive Quality control activities should be applied and reinforced at each stage of manufacturing process rather that at the last stage of final product.

• Smart Structures and Systems
• /
• v.30 no.2
• /
• pp.209-219
• /
• 2022

The determination for bearing capacity of precast nodular piles is conventionally time-consuming and high-cost by using numerous experiments and empirical methods. This study proposes an intelligent method to evaluate the bearing capacity and shaft resistance of the nodular piles with high efficiency based on long short-term memory (LSTM) approach. A series of field tests are first designed to measure the axial force, shaft resistance and displacement of the combined nodular piles under different loadings, in comparison with the single pre-stressed high-strength concrete piles. The test results confirm that the combined nodular piles could provide larger ultimate bearing capacity (more than 100%) than the single pre-stressed high-strength concrete piles. Both the LSTM-based method and empirical methods are used to calculate the shift resistance of the combined nodular piles. The results show that the LSTM-based method has a high-precision estimation on shaft resistance, not only for the ultimate load but also for the working load.

• Archives of Craniofacial Surgery
• /
• v.9 no.1
• /
• pp.27-30
• /
• 2008

Purpose: It's difficult to treat port wine stain with nodular change in Laser therapy, and many patients with port wine stain suffer from restriction in social activity in case that port wine stain located on face. We present our experience in excision of port wine stain and skin graft in two patients who had port wine stain with nodular change on their faces. Methods: After excision of discolorized skin and nodular changed lesion of port wine stain, thick split thickness skin graft was done. Results: There was no recurred nodular hypertrophy for 3 months and 3 years of follow up periods. Conclusion: Surgical treatments of port wine stain with nodular change can lead significant improvement of lesion and social intercourse.

• Tuberculosis and Respiratory Diseases
• /
• v.78 no.4
• /
• pp.385-389
• /
• 2015

Amyloidosis is defined as the presence of extra-cellular deposits of an insoluble fibrillar protein, amyloid. The pulmonary involvement of amyloidosis is usually classified as tracheobronchial, parenchymal nodular, or diffuse alveolar septal. A single nodular lesion can mimic various conditions, including malignancy, pulmonary tuberculosis, and fungal infection. To date, only one case of nodular pulmonary amyloidosis has been reported in Korea, a case involving multiple nodular lesions. Here, we report and discuss the case of a patient having single nodular amyloidosis.

• The Korean Journal of Cytopathology
• /
• v.9 no.1
• /
• pp.69-78
• /
• 1998

There is a lot of difficulty in the diagnosis of follicular lesions of the thyroid by fine needle aspiration cytology(FNAC). The main purpose of this report is offering more guidance regarding the cytologic appearance to distinguish follicular neoplasm from nodular golfer and laying stress on the presence of mixed group. The histologic and cytologic findings of 23 follicular neoplasms and 13 nodular (adenomatous) getters were reviewed. Histologic specimens were classified into the microfollicular(MIF), mixed(MIX), and nodular getter(NG) groups. The comparison of histologic patterns with histologic diagnosis revealed that all the lesions with predominantly microfollicular, trabecular, or solid pattern were follicular carcinoma and all the lesions with predominantly macrofollicular pattern were nodular goiter. The distinguishing cytologic features for the MIF group were irregular cell arrangement in cell groups(100%, p=0.00001), absence of atrophic follicular cells(100%, p=0.0007), abundant microfollicles(100%, 0=0.002), pleomorphic nuclei(100%, p=0.002), not predominant syncytial smear pattern(100%, p=0.002), heterochromatin(100%, p=0.032), absence of macrofollicles(100%, p=0.038), scant colloid(100%, 0=0.04), clear back-ground(83%, p=0.00006), and uniform sized follicles(83%, p=0.014). And regular cell arrangement(honeycomb appearance) in cell groups(85%, p=0.0000), atrophic change of follicular cells(69%, p=0.0002), syncytial smear pattern(54%, p=0.000), monomorphic nuclei(85%, p=0.008), and hemorrhagic background(100%, p=0.027) were characteristic features of the NG group. Seventeen out of 36 cases(47%) were the MIX group composed of combined cytologic features of the MIF and NG groups. Therefore the frequent presence of the MIX group is considered to be main cause of the difficulty in the diagnosis of follicular lesions by FNAC. The mixed morphologic feature may support the hypothesis of a biologic 'continuum' between nodular goiter and follicular neoplasm of thyroid gland.

• Journal of Yeungnam Medical Science
• /
• v.12 no.2
• /
• pp.400-404
• /
• 1995

Focal nodular hyperplasia is a benign hepatic tumor mainly composed of nodules of hepatocytes and Kupffer cells separated by fibrous septa. In general, it is difficult to differentiate focal nodular hyperplasia and hepatocellular carcinoma on ultrasonography, conventional CT(computerized tomography), and angiography. But IV bolus CT is of particular value in the diagnosis of focal nodular hyperplasia because it can divide enhanced CT into early and late phase and can characterize tumor vascularity and analyze any intratumoral elements. In our case, it was seen as a hypoechoic mass lesion on ultrasonography and hyperdense mass lesion on early-phase IV bolus CT and isodense mass lesion on late-phase IV bolus CT. On angiography, hypertrophy of the feeding artery and tumor staining were well visualized. The patient underwent operation and the mass was pathologically confirmed to a focal nodular hyperplasia. We report the first case of focal nodular hyperplasia on IV bolus CT in Korea.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.15-20
• /
• 2000

The effect of different kinds of steel scraps, the raw material in the manufacturing of nodular cast iron, on the microstructures and mechanical properties has been investigated Different grades were produced by changing the steel scraps. When nodular graphite cast iron was produced by using Zn rich steel scrap, such as galvanized steel sheet and auto body sheet, mechanical properties were deteriorated due to the decomposition of graphite, so close control must be maintained over this element. Tensile strength and hardness of nodular graphite cast iron which were manufactured by using Sb rich steel scrap were increased while elongation was decreased due to the increased amounts of pearlite within matrix. Mn and Cr contents in the structural steel sheet scrap or malleable iron scrap increased tensile strength and hardness of nodular graphite cast iron by facilitating the formation of pearlite.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.1
• /
• pp.31-41
• /
• 1991

The nodular corrosion behavior of Zircaloy-4 alloy was investigated by autoclave test at 50$0^{\circ}C$ under 1500 psi for the specimens quenched into water from $700^{\circ}C$, 80$0^{\circ}C$, 90$0^{\circ}C$, and 105$0^{\circ}C$. It was observed that the corrosion resistance of Zircalloy-4 specimen increased with increase in annealing temperature, and annealing at $\alpha$-region temperatures resulted in nodular corrosion while annealing at the temperature range of $\alpha$+$\beta$ and $\beta$ did not show nodular corrosion. It was also found that the size of nodule formed on the surface of the specimens increased with increase in exposure time in autoclave, but the total number of nodule remained uncha-nged. The corrosion of furnace-cooled specimens progressed mostly in the interior of grains where Fe and Cr alloying elements were largely depleted during the cooling process. However, the grain boundary seemed to act as a barrier to the nodular corrosion. From combining the present results with other works, it is suggested that the nodules nuc-leate in the local region where some of alloying elements are depleted.