• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.6
• /
• pp.322-329
• /
• 2000

BIST(Built-in Self Test) has been considered as the most promising DFT(design-for-test) scheme for the present and future test strategy. The most serious problem in applying BIST(Built-in Self Test) into a large circuit is the excessive increase in test time. This paper is focused on this problem. We proposed a new BIST construction scheme which uses a parallel divide-and-conquer method. The circuit division is performed with respect to some internal nodes called test points. The test points are selected by considering the nodal connectivity of the circuit rather than the testability of each node. The test patterns are generated by only one linear feedback shift register(LFSR) and they are shared by all the divided circuits. Thus, the test for each divided circuit is performed in parallel. Test responses are collected from the test point as well as the primary outputs. Even though the divide-and-conquer scheme is used and test patterns are generated in one LFSR, the proposed scheme does not lose its pseudo-exhaustive property. We proposed a selection procedure to find the test points and it was implemented with C/C++ language. Several example circuits were applied to this procedure and the results showed that test time was reduced upto 1/2151 but the increase in the hardware overhead or the delay increase was not much high. Because the proposed scheme showed a tendency that the increasing rates in hardware overhead and delay overhead were less than that in test time reduction as the size of circuit increases, it is expected to be used efficiently for large circuits as VLSI and ULSI.

• Korean Journal of Head & Neck Oncology
• /
• v.15 no.1
• /
• pp.22-28
• /
• 1999

Purpose: We performed this study retrospectively to evaluate local control, survival, prognostic factors, and failure patterns in patients with non-Hodgkin's lymphoma of Waldeyer's ring. Materials and Methods: From April 1984 to November 1996,41 patients with non-Hodgkin's lymphoma of Waldeyer's ring were treated with combined chemotherapy and radiation therapy. Age was ranged from 19 to 73 years old with a median age of 55 years, and there were 26 male and 15 female patients. Primary site was tonsil in 26 and base of the tongue in 7 and nasopharynx in 8, and stage distribution showed stage I in 12 and stage II in 29 patients. Pathologic classification was done according to Working Formulation. There were 1 with follicular mixed small cleaved and large cell, 8 with diffuse small cleaved cell, 7 with diffuse mixed small and large cell, and 25 cases with diffuse large cell. All patients were treated with combination of chemotherapy and radiation therapy. Chemotherapy regimen consisted of either CHOP-Bleo(cyclophosphamide, adriamycin, vincristine, prednisolone, bleomycin) or COP-BLAM III(cyclophosphamide, vincristine, prednisolone, bleomycin, adriamycin, procarbazine). Radiation dose ranged from 3600cGy to 6620cGy with a median dose of 5040cGy. Follow-up time was ranged from 15 months to 159 months(median 55 months). Results: The complete response was achieved in 98%(40/41) and partial response in 2%(1/41). The complete response rate were the followings: 66.7% for stage I and 51.7% for stage II after chemotherapy, 100% for stage I and 96.6% for stage II after overall treatment respectively. The overall survival rate and disease-tree survival rates at 5 years were 82.6% and 79.5%, respectively. Prognostic factors for overall survival were age(p=0.007), stage(p=0.03), nodal status(p=0.006) and radiation dose(p=0.003). The factors associated with disease-tree survival were stage(p=0.04), nodal status(p=0.004) and radiation dose(p=0.009). The failure patterns were analized in evaluable 35 patients with complete response. Locoregional failure was noted in 2 patients and distant metastasis in 5 patients. Conclusion: Our results suggest that combined modality therapy is the appropriate treatment for stage I-II intermediate grade non-hodgkin's lymphoma of the Waldeyer's ring. However, our material is small and the analysis is retrospective. Randomized prospective studies for combined therapy, radiation therapy alone and chemotherapy alone are needed.

• Journal of Gastric Cancer
• /
• v.1 no.2
• /
• pp.106-112
• /
• 2001

Purpose: Even with excellent surgical outcome, recurrence of early gastric cancer (EGC) after a curative resection is not declining because the incidence of EGC is increasing. The aim of this study was to propose an appropriate treatment strategy by assessing the risk factors for recurrence of curatively resected early gastric cancer. Materials and Methods: Of 3662 patients who had undergone gastric resections for gastric cancer from 1987 to 1996, the cases of 1050 curatively resected EGC patients were reviewed retrospectively. Among those 1050 patients, 50 patients ($4.8\%$) were diagnosed as having recurrent cancer, which was confirmed by clinico-radiological examination or re-operation. The risk factors that determined the recurrence patterns were investigated by using univariate and multivariate analyses. Results: The mean time to recurrence was 30.9 months, and hematogenous recurrence was the most frequent type ($32.0\%$). Among the 50 recurred patients, peritoneal recurrence showed the shortest mean time to recurrence ($18.5\pm17.7$months). Between the recurred and the non-recurred patients, there was no statistically significant difference with respect to age, sex, operation type, tumor size, tumor location, gross appearance, or histological differentiation. However, depth of invasion (submucosal invasion) and nodal involvement were significantly different (P<0.001) between the two groups. Using logistic regression analyses, nodal involvement was the only significant risk factor for recurrence in early gastric cancer (P<0.001). The median survival after the recurrence had been diagnosed was 4 months. Conclusion: Although the prognosis for EGC patients is excellent and recurrence of EGC after a curative resection is rare, the time to recurrence and the patterns of recurrence in EGC patients were diverse and unpredictable, and the result after recurrence is dismal. Considering the impact of lymph node metastasis on recurrence of EGC, a systematic lymphadenectomy, rather than limited surgery, should be performed if lymph node involvement is confirmed pre- or intraoperatively. Also if the postoperative pathologic findings reveal lymph node involvement, adjuvant chemotherapy is recommended.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.04a
• /
• pp.154-157
• /
• 2000

Distributed piezoelectric sensor and actuator system has been designed for the active vibration control of shell structure. PVDF is used for the materials of sensor/actuator. To prevent the adverse effect of spillover, distributed modal sensor/actuator system is established. Although shell structure is three-dimensional structure, the PVDF sensor/actuator system can be treated as two-dimensional Finite element programs are developed to consider curved structures having PVDF modal sensor/actuator. The nine-node Mindlin shell element with five nodal degree of freedoms is used for finite element discretization. The electrode patterns and lamination angle of PVDF sensor/actuator are optimized to design the modal sensor/actuator system Genetic algorithm is used for optimization. Sensor is designed to minimize the observation spillover, and actuator is designed to minimize the system energy of the control modes under a given initial condition. Modal sensor/actuator for the first and second modes of singly curved cantilevered shell structure are designed using mentioned methods. Discrete LQG method is used as a control law. Experimental demonstrations of the active vibration control with designed sensor/actuator system have been performed successfully.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2505-2510
• /
• 2013

Parametric studies on nonhomogeneous pile and homogeneous pile installed in clay were performed through the developed technique to investigate the effects of considered factors on the lateral pile behaviors. Values of the parameters with embedment depths of the two piles having different flexural rigidity show that values of the parameters for more rigid pile were greater than those for smaller one. Parameters for the case of the nonhomogeneous pile were converged to the same ones of the homogeneous pile as nodal point moves away from point of material boundary. In order to determine adequate upper length of the nonhomogeneous pile, changing patterns of the parameters, lateral displacement, member forces and so forth should be compared.

• Korean Journal of Head & Neck Oncology
• /
• v.9 no.2
• /
• pp.193-199
• /
• 1993

The prognosis of supraglottic cancer is worse than that of glottic cancer. Supraglottic cancers by subsites have different microenvironment of cancer cells, locoregional spread patterns. Therefore we presume that high therapeutic efficacy, while preserving the organ, can be obtained when supraglottic cancer is treated effectively according to its biological behaviors. For the purpose of determination of clinical characteristics and causes of treatment failures by subsites of supraglottis, the authors analyzed 24 cases(stage III 14 cases, stage IV 10 cases) of supraglottic cancer which were managed mainly by surgery in our institute. The results were as follows; 1) The suprahyoid group had worse pathologic grades, more frequent spread to hypopharynx, more freguent recurrence at primary site, and better three-year survival rate than the infrahyoid group. 2) The infrahyoid group had more frequent spread to glottis, understaging, recurrence at cervical nodes than the suprahyoid group. 3) There was no differences in nodal metastasis by sub sites. These results suggest that the suprahyoid group may have more aggressive spread pattern but better prognosis than the infrahyoid group.

• Composites Research
• /
• v.12 no.1
• /
• pp.47-58
• /
• 1999

This paper describes the results of experiments to analyze the free vibration of the laminated composite and hybrid composite plates with various shapes and boundary conditions. The materials of specimens were the carbon fiber reinforced plastic (CFRP), the glass fiber reinforced plastic (GFRP), the GFRP-Aluminum hybrid composite and the CFRP-CFRP hybrid composite. The natural frequencies and nodal patterns of plates with various shapes were experimentally obtained by impact exciting test using an impact hammer and an accelerometer. The experimental results were presented with normalized frequency parameters. The effects of composite material properties, fiber orientation angles, various geometrical shapes and boundary conditions on the vibration characteristics of composite plates were evaluated. To compare and verify these experimental results, the finite element analysis was carried out, and was well agreed with experimental results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.259-260
• /
• 2006

The ESPI(Electronic Speckle Pattern Interferometry) is a real time, full-field, non-destructive optical measurement technique. In this study, ESPI is proposed for the purpose of vibration analysis for new material, composite material. Composite materials have various complicated characteristics according to the ply materials, ply orientations, ply stacking sequences and boundary conditions. Therefore, it is difficult to analysis composite materials. For efficient use of composite materials in engineering applications the dynamic behavior, that is, natural frequencies, nodal patterns should be informed. If use Time-Average ESPI, can analyze vibration characteristic of composite material by real time easily. This study manufactured laminated composite of symmetry, asymmetry two kinds that is consisted of CFRP(Carbon Fiber Reinforced Plastics) and shape of test piece is rectangular form.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2000.11a
• /
• pp.228-231
• /
• 2000

The active vibration control of laminated composite shell has been performed with the optimized sensor/actuator system. PVDF film is used fur the material of sensor/actuator. Finite element method is utilized to model the whole structure including the piezoelectric sensor/actuator system, The distributed selective modal sensor/actuator system is established to prevent the adverse effect of spillover. In the finite element discretization process, the nine-node shell element with five nodal degrees of freedoms is used. Electrode patterns and lamination angles of sensor/actuator are optimized using genetic algorithm. Sensor is designed to minimize the observation spillover, and actuator is designed to minimize the system energy of the control modes under a given initial condition. Modal sensor/actuator profiles are optimized for the first and the second modes suppression of singly curved cantilevered composite shell structure. Discrete LQG method is used as a control law. The real time vibration control with profile optimized sensor/actuator system has been performed. Experimental result shows successful performance of the integrated structure for the active vibration control.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.947-957
• /
• 2023

Curved cylindrical structures such as elbows have a non-uniform thickness distribution due to their fabrication process, and as a result have a number of complex mode shapes, including circumferential and axial nodal patterns. In nuclear power plants, material degradation is induced in pipes by flow accelerated erosion and corrosion, causing the wall thickness of carbon steel elbows to gradually thin. The corresponding frequencies of each mode shape vary according to the wall thinning state. Therefore, the thinning state can be estimated by monitoring the varying modal characteristics of the elbow. This study investigated the varying modal characteristics of artificially thinned carbon steel elbows for each thinning state using numerical simulation and experimental methods (MRIT, Multiple Reference Impact Test). The natural frequencies of specified mode shapes were extracted, and results confirmed they linearly decreased with increasing thinning. In addition, by comparing single FRF (Frequency Response Function) data with the results of MRIT, a concise and cost effective thinning estimation method was suggested.