• International Journal of Precision Engineering and Manufacturing
• /
• 제2권3호
• /
• pp.61-68
• /
• 2001

A linear motor has a lot of advantages in comparison with conventional feed mechanisms: high transitional speed, acceleration, high control performance and good positioning at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has along lifetime and is easy to assemble. Recently, the two types of linear motors, asynchronous and synchronous linear motors, are often applied to machine tools as a fast feed mechanism. In this paper, a comparison between the two types of linear motors as to power loss and thermal behavior is made. The heat sources of the linear motor-the electrical power loss in the motor and the frictional heat on the linear guidance-are measured and compared. Also, the temperature on the linear motor and machine structure is measured and presented.

• Structural Engineering and Mechanics
• /
• 제10권2호
• /
• pp.181-195
• /
• 2000

A two-step procedure for the application of non linear constrained programming to the limit analysis of rigid brick-block systems with no-tension and frictional interface is implemented and applied to various masonry structures. In the first step, a linear problem of programming, obtained by applying the upper bound theorem of limit analysis to systems of blocks interacting through no-tension and dilatant interfaces, is solved. The solution of this linear program is then employed as initial guess for a non linear and non convex problem of programming, obtained applying both the 'mechanism' and the 'equilibrium' approaches to the same block system with no-tension and frictional interfaces. The optimiser used is based on the sequential quadratic programming. The gradients of the constraints required are provided directly in symbolic form. In this way the program easily converges to the optimal solution even for systems with many degrees of freedom. Various numerical analyses showed that the procedure allows a reliable investigation of the ultimate behaviour of jointed structures, such as stone masonry structures, under statical load conditions.

• Journal of the Korean Data and Information Science Society
• /
• 제17권2호
• /
• pp.661-668
• /
• 2006

There have been some controversies on the use of the coefficient of determination for linear no-intercept model. One definition of the coefficient of determination, $R^2={\sum}\;{\widehat{y^2}}\;/\;{\sum}\;y^2$, is being widely accepted only for linear no-intercept models though Kvalseth (1985) demonstrated some possible pitfalls in using such $R^2$. Main objective of this note is to report that $R^2$ is not a desirable measure of fit for the no-intercept linear model. In fact it is found that mean square error(MSE) could replace $R^2$ efficiently in most cases where selection of no-intercept model is at issue.

• Journal of Mechanical Science and Technology
• /
• 제17권10호
• /
• pp.1563-1571
• /
• 2003

A fast response NO analyzer was applied to investigate the relation between cycle-by-cycle NO emissions and combustion chamber pressure. NO emissions were sampled at an isolated exhaust manifold of 4-stroke spark ignition engine to avoid the interference of exhaust gas from other cylinders. The linear correlation analysis was performed with collected data of NO emissions and combustion chamber pressure with respect to the various air-fuel mixture ratios and engine loads. The sampled data sets were obtained during 200 cycles at each operating condition. The results showed that there was a typical pattern in NO emissions from an exhaust port through a cycle. It was possible to set a block of crank angle in which the linear correlation coefficient between NO emissions and combustion chamber pressure was high. As the engine load increased, NO emissions were more dependent on combustion chamber pressure after TDC. It was also analyzed that the correlation between two parameters with respect to air-fuel mixture ratio tended to increase as mixture went leaner. Furthermore, this correlation coefficient for the mixture near the lean limit seemed to be kept high even though combustion was unstable.

• 한국자기학회지
• /
• 제20권1호
• /
• pp.28-33
• /
• 2010

리니어 펌프 구동용 하이브리드 전자기 리니어 엑츄에이터를 해석하고 설계하였다. 솔레노이드 엑츄에이터는 기계적인 에너지 변환장치가 필요하지 않기 때문에 공간을 많이 차지하지 않는 이점으로 인해 널리 사용되고 있다. 또한 에너지 손실이 매우 낮고 소음이 발생하지 않는 장점을 가지고 있다. 하지만, 솔레노이드 엑츄에이터는 전력소비가 크다는 단점을 가지고 있다. 이런 단점을 보완하여 전력소비를 줄이기 위하여 영구자석을 활용한 새로운 하이브리드 전자기 리니어 엑츄에이터를 제안하고 향상된 성능을 검증하기 위해 동적 유한요소 분석을 통해 시뮬레이션을 수행하였다.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.896-905
• /
• 2003

A linear motor has many advantages next to conventional feed mechanisms: high transitional speed and acceleration, high control performance, and good positioning accuracy at high speed. Through the omission of a power transfer element, the linear motor shows no wear and no backlash, has a long lifetime, and is easy to assemble. A disadvantage of the linear motor is low efficiency and resultant high-temperature rise in itself and neighboring structures during operation. This paper presents the thermal behavior of the linear motor as a feed mechanism in machine tools. To improve the thermal behavior, an insulation layer is used. By placing the insulation layer between the primary part and the machine table, both the temperature difference and the temperature fluctuation in the machine table due to a varying motor load are reduced.

• Journal of Gastric Cancer
• /
• 제19권2호
• /
• pp.193-201
• /
• 2019

Purpose: There is no consensus on the optimal method for intracorporeal esophagojejunostomy (EJ) in laparoscopic total gastrectomy (LTG). This study aims to compare 2 established methods of EJ anastomosis in LTG. Materials and Methods: A total of 314 patients diagnosed with gastric cancer that underwent LTG in the period from January 2013 to October 2016 were enrolled in the study. In 254 patients, the circular stapler with purse-string "Lap-Jack" method was used, and in the other 60 patients the linear stapling method was used for EJ anastomosis. After propensity score matching, 58 were matched 1:1, and retrospective data for patient characteristics, surgical outcome, and post-operative complications was reviewed. Results: The 2 groups showed no significant difference in age, body mass index, or other clinicopathological characteristics. After propensity score matching analysis, the linear group had shorter operating time than the circular group ($200.3{\pm}62.0$ vs. $244.0{\pm}65.5$, $P{\leq}0.001$). Early postoperative complications in the circular and linear groups occurred in 12 (20.7%) and 15 (25.9%, P=0.660) patients, respectively. EJ leakage occurred in 3 (5.2%) patients from each group, with 1 patient from each group needing intervention of Clavien-Dindo grade III or more. Late complications were observed in 3 (5.1%) patients from the linear group only, including 1 EJ anastomosis stricture, but there was no statistical significance. Conclusions: Both circular and linear stapling techniques are feasible and safe in performing intracorporeal EJ anastomosis during LTG. The linear group had shorter operative time, but there was no difference in anastomosis complications.

• Structural Engineering and Mechanics
• /
• 제65권1호
• /
• pp.91-98
• /
• 2018

Three structure-dependent integration methods with no numerical dissipation have been successfully developed for time integration. Although these three integration methods generally have the same numerical properties, such as unconditional stability, second-order accuracy, explicit formulation, no overshoot and no numerical damping, there still exist some different numerical properties. It is found that TLM can only have unconditional stability for linear elastic and stiffness softening systems for zero viscous damping while for nonzero viscous damping it only has unconditional stability for linear elastic systems. Whereas, both CEM and CRM can have unconditional stability for linear elastic and stiffness softening systems for both zero and nonzero viscous damping. However, the most significantly different property among the three integration methods is a weak instability. In fact, both CRM and TLM have a weak instability, which will lead to an adverse overshoot or even a numerical instability in the high frequency responses to nonzero initial conditions. Whereas, CEM possesses no such an adverse weak instability. As a result, the performance of CEM is much better than for CRM and TLM. Notice that a weak instability property of CRM and TLM might severely limit its practical applications.

• 한국운동역학회지
• /
• 제24권4호
• /
• pp.359-365
• /
• 2014

A study was conducted to investigate the possible effects of fatigue which was resulted from increased running time on the stability during a prolonged run. The purposes of this study were twofold: first, to determine the discrete and non-linear variability of GRF (ground reaction force) components between running times to know the body stability, and second, to determine the pattern between discrete and non-linear variability. Nineteens healthy young adult males served in this study as subjects who ran at their preferred running speed. GRF data for twenty strides were collected at 5, 65, and 125 minutes during run. Variance coefficient and Lyapunov Exponent techniques on the GRF data were used to calculate variability index for each of the running time conditions. There were no difference between discrete variabilities of three components of GRF, but non-linear variability of the Fz component of GRF was decreased by increasing running time (p<.01). No relationship was found between discrete and non-linear variability.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제8권2호
• /
• pp.153-162
• /
• 2001

In this Paper, the notion of $\varepsilon$-Birkhoff orthogonality introduced by Dragomir [An. Univ. Timisoara Ser. Stiint. Mat. 29(1991), no. 1, 51-58] in normed linear spaces has been extended to metric linear spaces and a decomposition theorem has been proved. Some results of Kainen, Kurkova and Vogt [J. Approx. Theory 105 (2000), no. 2, 252-262] proved on e-near best approximation in normed linear spaces have also been extended to metric linear spaces. It is shown that if (X, d) is a convex metric linear space which is pseudo strictly convex and M a boundedly compact closed subset of X such that for each $\varepsilon$>0 there exists a continuous $\varepsilon$-near best approximation $\phi$ : X → M of X by M then M is a chebyshev set .