• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.4
• /
• pp.333-340
• /
• 2010

Wastewater treatment using algal communities and biodiesel production from wastewater-cultivated algal biomass is a promising green growth technology. In literature, there are many studies providing information on algal species producing high content of lipid. However, very little is known about adaptability and wastewater treatability of such high-lipid algal species. In this study, we attempted to characterize algal biomass production and wastewater treatability of high-lipid algal species under municipal wastewater condition. For this, four known high-lipid algal strains including Chlorella vulgaris AG 10032, Ankistrodesmus gracilis SAG 278-2, Scenedesmus quadricauda, and Botryococcus braunii UTEX 572 were individually inoculated into municipal wastewater where its indigenuous algal populations were removed prior to the inoculation, and the algae-inoculated wastewater was incubated in the presence of light source (80${\mu}E$) for 9 days in laboratory batch reactors. During the incubations, algal biomass production (dry weight) and the removals of dissolved organics (COD), nitrogen and phosphorous were measured in laboratory batch reactors. According to algal growth results, C. vulgaris, A. gracilis and S. quadricauda exhibited faster growth than indigenuous wastewater algal populations while B. braunii did not. The wastewater-growing strains exhibited efficient removals of total-N, ${NH_4}^+$-N, Total-P and ${PO_4}^{3-}$-P which satisfy the Korea water quality standards for effluent from municipal wastewater treatment plants. A. gracilis and S. quadricauda exhibited efficient and stable treatability of COD but C. vulgaris showed unstable treatability. Taken together with the results, A. gracilis and S. quadricauda were found to be suitable species for biomass production and wastewater treatment under municipal wastewater condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.235-243
• /
• 2007

In order to understand the water mass properties in the southern location of the East Sea in the Korean coasts, the vertical distributions (down to 2,000 m deep) of water temperature, salinity, and dissolved inorganic nutrients were determined in April of 2005. The water mass of the surveyed location showed distinct vertical layers; highly saline surface, surface mixing layer, and thermocline of low temperature and salinity. The water layer below 300 m was characterized by water temperature lower than $1^{\circ}C$ and salinity 34.06, showing a representative water mass of the East Sea. The inorganic nutrients rapidly increased from 200m in the northern and southern parts around Ulleung Basin. A marked environmental difference was found between two layers separated by thermocline. The upper layer of the thermocline was oligotrophic and the vertical distribution of nutrient was very stable. In the water layer between 100 and 200m the nutrients slightly increased but remained still stable. From southern coasts to northeastern Ulleung, the water mass properties were site specific; the thickness of the surface mixed layer and nutricline showed a trend diminishing toward the northern locations probably due to diminished influence of Tsushima water. Redfield ratio (N:P=16:1) based on the ratio of chemical composition in organism revealed that nitrogen value continuously decreased to less than 16 with the water depth down to loom from the thermocline. The value in the water layer deeper than 100 to 200 m, thereafter, showed an increasing trend (over 16). This result was further supported by the finding of lower chlrophyll a content in the layer.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.3
• /
• pp.304-309
• /
• 2011

BACKGROUND: Generally, water plants may play an important role in nutrients(N, P) removal in constructed wetlands(CWs). Previous studies considered nutrients uptake by water plants in various CWs for treating point source pollution. On the other hand, few studies considered nutrients uptake by water plants in free water surface(FWS) CWs for treating non-point source pollution. METHODS AND RESULTS: To investigate characteristics of nutrient uptake by water plants in FWS CWs, dry weights, nutrients content and nutrients uptake by water plants were investigated from April, 2008 to October, 2008. Dominance plants were Phragmites japonica STEUD (PHRJA), Nymphaea tetragona ANGUSTA(NTMTE), Typha orientalis PRESL(TYHOR), Phragmites communis TRINIUS(PHRCO) and Zizanis latifolia TURCZ(ZIZLA) in FWS CWs. The dry weights of water plants in August were higher in the order of TYHOR(54.27 g/plant) > PHRJA(44.30 g/plant) ${\geqq}$ PHRCO(39.60 g/plant) ${\geqq}$ ZIZLA(37.80 g/plant) ${\fallingdotseq}$ NTMTE(36.75 g/plant). The T-N and T-P contents by water plants were not significantly differences regardless of cultivation period. The maximum amount of T-N uptake by water plants in August were 773 mg/plant for PHRJA, 625 mg/plant for NTMTE, 1206 mg/plant for TYHOR, 754 mg/plant for PHRCO and 768 mg/plant for ZIZLA. The maximum amounts of T-P uptake by PHRJA, NTMTE, TYHOR, PHRCO and ZIZLA were 397, 177, 411, 261 and 229 mg/plant in August, respectively. CONCLUSION(s): The results of this study suggest that optimum water plant was Typha orientalis PRESL in free water surface constructed wetlands.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2000.06a
• /
• pp.16-23
• /
• 2000

The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.

• Korean Journal of Soil Science and Fertilizer
• /
• v.3 no.1
• /
• pp.1-10
• /
• 1970

A pot experiment of paddy rice was carried out primarily to find out the effect of potash in relation to the application of wollastonite on paddy rice. The result which showed increased paddy rice yield has been evaluated from the factors of yield, yield components, soil and plant analysis data at different stages of plant growth and the summary of review is described as follows : 1. Effect of potash is likely to be greater in the presence of wollastonite and a larger quantity of wollastonite application would require correspondingly larger quantities of potash. 2. Application of potash and wollastonite resulted increased paddy rice yield may be largely due to increased contents of potassium, calcium and silica in the soil and increased concentration of $K_2O$, CaO and $SiO_2$, $SiO_2/N$ ratio and $K_2O/N$ ratio in rice straw. 3. The maximum paddy rice yield, at less than 300kg/10a application of wollastonite was obtained by applying 8kg of $K_2O$ per 10 are while 600kg/10a application of wollastonite gave the maximum yield by applying 16kg of $K_2O$ application per 10 are. 4. Application of wollastonite decreased the number of ears per hill and number of grains per ear. While ripening percentage and 1,000 grain weight tended to increase with wollastonite. The increased contents of CaO and $SiO_2$ in straw due to wollastonite application showed a negative correlation with the number of ears per hill and the number of grains per ear but a positive correlation was shown with ripening percentage and 1,000 grains weight. 5. Potash application appeared to be increasing the number of ears per hill and the number of grains per ear. There was a positive correlation exist between the higher content of $K_2O$ in rice straw and the number of grains per ear 6. Amount of nitrogen absorbed tended to decrease with increase in quantities of potash and wollastonite but the ratio of $SiO_2/N$ was increased by further application of potash and wollastonite. 7. $K_2O/N$ ratio was increased with incrementing in quantities of potash application but in the absence of potash, $K_2O/N$ ratio was decreased as to increasing wollastonite application.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.52-60
• /
• 2000

This study was conducted to gain basic data for alleviation of gas emission and conservation of healthy soil environment by investigating an aspect of gas emission and microbial diversity due to the supplement of different fertilizers after application with a livestock manure compost in greenhouse soils. Green pepper was cultivated in clay loamy soil from April to August. Before planting, a livestock manure compost was applied with $741mg\;ha^{-1}$ on the basis of the phosphate content contained in compost. And then, deficient nitrogen for cropping was supplemented with either quick-acting fertilizer of urea or a controlled slow release fertilizer made from urea formaldehyde(U/F). $NH_3$ and R $NH_2$ gases emitted from soil showed a low concentration in the early stage but a maximum in 27 days after planting, then decreased rapidly and not detected after 33 days. Their average concentrations were 42% and 85% lower in the treatment of slow release fertilizer than that of urea fertilizer, respectively. $CO_2$ gas emitted under urea fertilization was ranged from 1,200 to $3,200mg{\ell}^{-1}$ and that in slow release fertilizer was $900{\sim}2,650mg\;{\ell}^{-1}$. The average concentration of urea treatment was $2,260mg{\ell}^{-1}$ and 30% higher than that of slow release fertilizer. The treatment of slow release fertilizer with the lapse of cropping time populated larger in numbers of bacteria, actinomycetes, nitrate bacteria and nitrate reduction bacteria, and ratios of bacteria and actinmycetes to fungi than that of urea fertilizer. But the number of fungi was higher in the treatment of urea fertilizer and denitrifying bacteria showed a similar trend in both treatments. The microbial diversity index, which calculated with numbers of 6 species of microorganisms, was decreased with increasing of growing stage in the range of 0.1 to 0.35 and that was higher in the tratment of slow release fertilizer than urea.

• Korean Journal of Soil Science and Fertilizer
• /
• v.6 no.2
• /
• pp.95-105
• /
• 1973

Sink (grain)-filling rates of IR667 line (Suwon 213 and 214) and local leading varieties (Jinheung and Paldal) were investigated in relation to sink-source ratio, sink-source distance, forms of photosynthates, and weather factors. The results are as follows. 1. IR667 line have higher maximum filling rate (g. grain/day. ear) and shorter duration to reach maximum filling rate than local varieties. The curve pattern of sink-filling rate was high and steep type in IR667 line and low and broad type in local varieties. 2. Weather factors seem to give little effect on the curve pattern of sink-filling rate. 3. The functional sink-source distance (actual sink-source distance multiplied by the contribution rate of leaf for grain production) was shorter in upper leaves (flag and 2nd leaf) for IR667 line, the upper leaf-dependent type in grain production, and was longer in lower leaves (3rd and 4th) for local varieties, the lower leaf-dependent type. Specially short first internode from top may contribute to the upper leaf depencency of IR667 line. 4. According to free sugar-starch ratio (sugar/starch) in the culm and leaf sheath IR667 line could be classified as the high sugar type and the local varieties as the high starch type. The ratio of transportable form (sugar) to non transportable photosynthate (starch) seems to relate with sink-filling rate. And high sugar type is expected to have higher efficiency for grain production in view of energy balance. 5. A hypothesis that the higher in the uniformity within the series of productive structure the more efficient in grain production is proposed and discussed in relation to productivity. 6. According to the pattern of percent nutrient retention of each leaf blade IR667 showed the central retention type and Jinheung showed the apical retention type and each retention type appears to be a cause of each canopy conservation pattern. 7. From the content and percent distribution of nutrient in various organ IR667 could be classified as the leaf sheath dominant type and Jinheung as the leaf blade dominant type. 8. The fact that the greater the percent translocation of nutrient into grain the greater the percent nutrient retention in leaf blade was held between nitrogen and phosphorus within a variety and between varieties within a nutrient (N, P or K).

• Food Science of Animal Resources
• /
• v.30 no.2
• /
• pp.243-251
• /
• 2010

This study was conducted to investigate the effects of the addition of cordyceps ochraceostromat, conjugated linoleic acid (CLA) and silkworm cocoon on the quality and storage characteristics of pork sausage manufactured by MDCM (mechanically deboned chicken meat) recovered protein. The samples were divided into 5 groups (sausage made from pork ham; control, 40% of MDCM recovered protein to replace pork ham; T1, 40% of MDCM recovered protein to replace pork ham with 0.1% cordyceps ochraceostromat; T2, 40% of MDCM recovered protein to replace pork ham with 0.1% CLA; T3, and 40% of MDCM recovered protein to replace pork ham with 0.1% silkworm cocoon; T4). The control sample had a higher moisture and protein contents and lower fat content than the other samples during 4 weeks of storage at $4^{\circ}C$ The treatment samples had lower lightness and higher redness values than the control (p<0.05). Hardness, cohesiveness, gumminess and chewiness were significantly lower in the treatment samples than the control (p<0.05). All sausage samples showed a significant increase in thiobarbituric acid reactive substances (TBARS), volatile basic nitrogen, and total plate counts during the storage time (p<0.05). In addition, the MDCM treatment samples had higher TBARS values than the control, but the VBN value of the treatment samples was lower than the control after the 4 weeks storage period.

• Journal of Nutrition and Health
• /
• v.9 no.3
• /
• pp.1-7
• /
• 1976

This study was carried out to observe the nutritive effects of feeding rice diet and rice diet mixed with barley or millet, or both on the growth rate and biological availability of some nutrients by albino rats. The experimental diets were prepared on the basis of isocaloric and isonitrogenous containing 357 kcal of energy and 12g of protein per 100g of diet. The experimental animals weighing about 66g of both sexes were fed on 7 kinds of diets such as control diet, rice (100%) diet, rice (70%)+barley (30%) diet, rice (70%)+millet (30%) diet, rice (70%)+barley (20%)+millet (10%) diet, rice (70%)+barley (15%)+millet (15%) diet, and rice (70%)+barley (10%)+millet (20%) diet for 7 weeks. The results obtained are summarized as follows; 1. The gain in body weight was higher for barley and/or millet mixed with rice diet groups than rice diet group with no statistical difference. 2. Although there was no difference in the amount of food consumed by experimental groups, the food efficiency ratio was sightly higher for the miked diet groups than rice atone diet group. 3. The protein efficiency ratio was also higher for barley and millet miked with rice diet groups than rice diet group, although statistical significance was not found. 4. Apparent digestibility of protein of rice diet group was significantly (P<0.01) higher than any other diet group. Although there was no remarkable difference between mixed diet group was found, the apparent digestibility of protein tended to increase when rats were fed on the barley and millet mixed with rice diet. Apparent biological value (p<0.05) and net protein utilization (p<0.01) were also significantly higher for the groups fed mixed diet with barley and/or millet than rice diet group, and those for millet alone mixed diet were slightly lower. 5. The content of total nitrogen in the liver and of protein in serum were not significantly different among experimental groups. It may be concluded from the above results that an adequate supplementation of rice with other cereals and mixing ratio of other cereals to rice were important for the efficient utilization of protein in total diet.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.447-453
• /
• 2019

In this study, the effect of supplying volume and frequency of a nutrient solution consisted with $NO_3-N$ 4.6, $NH_4-N$ 3.4, $PO_4-P$ 3, K 3, Ca 4.6 and Mg $2.2mmol{\cdot}L^{-1}$ on growth and fruit quality of 'Duke' blueberry was investigated. Three years old 'Duke' blueberry bushes cultivated in containers ($60{\times}80{\times}40cm$) filled with 130L peat moss and 40L pearlite (v/v) were selected for the experiment. The growth containers were mulched with sawdust. Two different volumes (4L and 8L) of nutrient solution was tested at three different supplying frequencies (one time, two times, and three times) per week and the drainage quality of nutrient solution and fruit quality of 'Duke' blueberry was evaluated. The optimal drainage rate for the vegetable cultivation is known to be 20-30%. The results revealed that the average drainage rates of 27% and 29% for the nutrient solution supplied in 'Duke' blueberry growth medium at 4L, 2 times/7 days and 4L, 3 times/7days, respectively. The highest shoot diameter (4.2mm) and shoot length (31cm) of 'Duke' blueberry was recorded with the 8L of nutrient solution supplied at 3 times per 7 days. According to the analysis of inorganic components in the drainage of nutrient solution, there was a tendency of absorbing nitrogen at the early stage of growth. The supplying volume and frequency of nutrient solution was not significantly affected on 'Duke' blueberry fruit weight, soluble solids content, and titratable acidity. The highest yield per bush (2.7kg) was recorded for the nutrient solution supplied with 4L at three times per 7 days, while the 4L nutrient solution supplied at one time per 7 days resulted the lowest yield of 1.4kg per bush. Consequently, the tested nutrient solution can be applied for the 'Duke' blueberry bushes with the volume of 4L at three times per week for the better crop growth.